UTF-8 AboutDialog About Litecoin About Litecoin Litecoin version Litecoin version This is experimental software. Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard. This is experimental software. Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard. Copyright Copyright The Litecoin developers The Litecoin developers AddressBookPage Address Book Address Book Double-click to edit address or label Double-click to edit address or label Create a new address Create a new address Copy the currently selected address to the system clipboard Copy the currently selected address to the system clipboard &New Address &New Address These are your Litecoin addresses for receiving payments. You may want to give a different one to each sender so you can keep track of who is paying you. These are your Litecoin addresses for receiving payments. You may want to give a different one to each sender so you can keep track of who is paying you. &Copy Address &Copy Address Show &QR Code Show &QR Code Sign a message to prove you own a Litecoin address Sign a message to prove you own a Litecoin address Sign &Message Sign &Message Delete the currently selected address from the list Delete the currently selected address from the list Export the data in the current tab to a file Export the data in the current tab to a file &Export &Export Verify a message to ensure it was signed with a specified Litecoin address Verify a message to ensure it was signed with a specified Litecoin address &Verify Message &Verify Message &Delete &Delete These are your Litecoin addresses for sending payments. Always check the amount and the receiving address before sending coins. These are your Litecoin addresses for sending payments. Always check the amount and the receiving address before sending coins. Copy &Label Copy &Label &Edit &Edit Send &Coins Send &Coins Export Address Book Data Export Address Book Data Comma separated file (*.csv) Comma separated file (*.csv) Error exporting Error exporting Could not write to file %1. Could not write to file %1. AddressTableModel Label Label Address Address (no label) (no label) AskPassphraseDialog Passphrase Dialog Passphrase Dialog Enter passphrase Enter passphrase New passphrase New passphrase Repeat new passphrase Repeat new passphrase Enter the new passphrase to the wallet. Please use a passphrase of 10 or more random characters, or eight or more words. Enter the new passphrase to the wallet. Please use a passphrase of 10 or more random characters, or eight or more words. Encrypt wallet Encrypt wallet This operation needs your wallet passphrase to unlock the wallet. This operation needs your wallet passphrase to unlock the wallet. Unlock wallet Unlock wallet This operation needs your wallet passphrase to decrypt the wallet. This operation needs your wallet passphrase to decrypt the wallet. Decrypt wallet Decrypt wallet Change passphrase Change passphrase Enter the old and new passphrase to the wallet. Enter the old and new passphrase to the wallet. Confirm wallet encryption Confirm wallet encryption Warning: If you encrypt your wallet and lose your passphrase, you will LOSE ALL OF YOUR LITECOINS! Warning: If you encrypt your wallet and lose your passphrase, you will LOSE ALL OF YOUR LITECOINS! Are you sure you wish to encrypt your wallet? Are you sure you wish to encrypt your wallet? IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. Warning: The Caps Lock key is on! Warning: The Caps Lock key is on! Wallet encrypted Wallet encrypted Litecoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your litecoins from being stolen by malware infecting your computer. Litecoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your litecoins from being stolen by malware infecting your computer. Wallet encryption failed Wallet encryption failed Wallet encryption failed due to an internal error. Your wallet was not encrypted. Wallet encryption failed due to an internal error. Your wallet was not encrypted. The supplied passphrases do not match. The supplied passphrases do not match. Wallet unlock failed Wallet unlock failed The passphrase entered for the wallet decryption was incorrect. The passphrase entered for the wallet decryption was incorrect. Wallet decryption failed Wallet decryption failed Wallet passphrase was successfully changed. Wallet passphrase was successfully changed. BitcoinGUI Sign &message... Sign &message... Synchronizing with network... Synchronizing with network... &Overview &Overview Show general overview of wallet Show general overview of wallet &Transactions &Transactions Browse transaction history Browse transaction history Edit the list of stored addresses and labels Edit the list of stored addresses and labels Show the list of addresses for receiving payments Show the list of addresses for receiving payments E&xit E&xit Quit application Quit application Show information about Litecoin Show information about Litecoin About &Qt About &Qt Show information about Qt Show information about Qt &Options... &Options... &Encrypt Wallet... &Encrypt Wallet... &Backup Wallet... &Backup Wallet... &Change Passphrase... &Change Passphrase... Importing blocks from disk... Importing blocks from disk... Reindexing blocks on disk... Reindexing blocks on disk... Send coins to a Litecoin address Send coins to a Litecoin address Modify configuration options for Litecoin Modify configuration options for Litecoin Backup wallet to another location Backup wallet to another location Change the passphrase used for wallet encryption Change the passphrase used for wallet encryption &Debug window &Debug window Open debugging and diagnostic console Open debugging and diagnostic console &Verify message... &Verify message... Litecoin Litecoin Wallet Wallet &Send &Send &Receive &Receive &Addresses &Addresses &About Litecoin &About Litecoin &Show / Hide &Show / Hide Show or hide the main Window Show or hide the main Window Encrypt the private keys that belong to your wallet Encrypt the private keys that belong to your wallet Sign messages with your Litecoin addresses to prove you own them Sign messages with your Litecoin addresses to prove you own them Verify messages to ensure they were signed with specified Litecoin addresses Verify messages to ensure they were signed with specified Litecoin addresses &File &File &Settings &Settings &Help &Help Tabs toolbar Tabs toolbar [testnet] [testnet] Litecoin client Litecoin client %n active connection(s) to Litecoin network %n active connection to Litecoin network %n active connections to Litecoin network No block source available... No block source available... Processed %1 of %2 (estimated) blocks of transaction history. Processed %1 of %2 (estimated) blocks of transaction history. Processed %1 blocks of transaction history. Processed %1 blocks of transaction history. %n hour(s) %n hour %n hours %n day(s) %n day %n days %n week(s) %n week %n weeks %1 behind %1 behind Last received block was generated %1 ago. Last received block was generated %1 ago. Transactions after this will not yet be visible. Transactions after this will not yet be visible. Error Error Warning Warning Information Information This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee? This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee? Up to date Up to date Catching up... Catching up... Confirm transaction fee Confirm transaction fee Sent transaction Sent transaction Incoming transaction Incoming transaction Date: %1 Amount: %2 Type: %3 Address: %4 Date: %1 Amount: %2 Type: %3 Address: %4 URI handling URI handling URI can not be parsed! This can be caused by an invalid Litecoin address or malformed URI parameters. URI can not be parsed! This can be caused by an invalid Litecoin address or malformed URI parameters. Wallet is encrypted and currently unlocked Wallet is encrypted and currently unlocked Wallet is encrypted and currently locked Wallet is encrypted and currently locked A fatal error occurred. Litecoin can no longer continue safely and will quit. A fatal error occurred. Litecoin can no longer continue safely and will quit. ClientModel Network Alert Network Alert EditAddressDialog Edit Address Edit Address &Label &Label The label associated with this address book entry The label associated with this address book entry &Address &Address The address associated with this address book entry. This can only be modified for sending addresses. The address associated with this address book entry. This can only be modified for sending addresses. New receiving address New receiving address New sending address New sending address Edit receiving address Edit receiving address Edit sending address Edit sending address The entered address "%1" is already in the address book. The entered address "%1" is already in the address book. The entered address "%1" is not a valid Litecoin address. The entered address "%1" is not a valid Litecoin address. Could not unlock wallet. Could not unlock wallet. New key generation failed. New key generation failed. GUIUtil::HelpMessageBox Litecoin-Qt Litecoin-Qt version version Usage: Usage: command-line options command-line options UI options UI options Set language, for example "de_DE" (default: system locale) Set language, for example "de_DE" (default: system locale) Start minimized Start minimized Show splash screen on startup (default: 1) Show splash screen on startup (default: 1) OptionsDialog Options Options &Main &Main Optional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB. Optional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB. Pay transaction &fee Pay transaction &fee Automatically start Litecoin after logging in to the system. Automatically start Litecoin after logging in to the system. &Start Litecoin on system login &Start Litecoin on system login Reset all client options to default. Reset all client options to default. &Reset Options &Reset Options &Network &Network Automatically open the Litecoin client port on the router. This only works when your router supports UPnP and it is enabled. Automatically open the Litecoin client port on the router. This only works when your router supports UPnP and it is enabled. Map port using &UPnP Map port using &UPnP Connect to the Litecoin network through a SOCKS proxy (e.g. when connecting through Tor). Connect to the Litecoin network through a SOCKS proxy (e.g. when connecting through Tor). &Connect through SOCKS proxy: &Connect through SOCKS proxy: Proxy &IP: Proxy &IP: IP address of the proxy (e.g. 127.0.0.1) IP address of the proxy (e.g. 127.0.0.1) &Port: &Port: Port of the proxy (e.g. 9050) Port of the proxy (e.g. 9050) SOCKS &Version: SOCKS &Version: SOCKS version of the proxy (e.g. 5) SOCKS version of the proxy (e.g. 5) &Window &Window Show only a tray icon after minimizing the window. Show only a tray icon after minimizing the window. &Minimize to the tray instead of the taskbar &Minimize to the tray instead of the taskbar Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu. Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu. M&inimize on close M&inimize on close &Display &Display User Interface &language: User Interface &language: The user interface language can be set here. This setting will take effect after restarting Litecoin. The user interface language can be set here. This setting will take effect after restarting Litecoin. &Unit to show amounts in: &Unit to show amounts in: Choose the default subdivision unit to show in the interface and when sending coins. Choose the default subdivision unit to show in the interface and when sending coins. Whether to show Litecoin addresses in the transaction list or not. Whether to show Litecoin addresses in the transaction list or not. &Display addresses in transaction list &Display addresses in transaction list &OK &OK &Cancel &Cancel &Apply &Apply default default Confirm options reset Confirm options reset Some settings may require a client restart to take effect. Some settings may require a client restart to take effect. Do you want to proceed? Do you want to proceed? Warning Warning This setting will take effect after restarting Litecoin. This setting will take effect after restarting Litecoin. The supplied proxy address is invalid. The supplied proxy address is invalid. OverviewPage Form Form The displayed information may be out of date. Your wallet automatically synchronizes with the Litecoin network after a connection is established, but this process has not completed yet. The displayed information may be out of date. Your wallet automatically synchronizes with the Litecoin network after a connection is established, but this process has not completed yet. Balance: Balance: Unconfirmed: Unconfirmed: Wallet Wallet Immature: Immature: Mined balance that has not yet matured Mined balance that has not yet matured Recent transactions Recent transactions Your current balance Your current balance Total of transactions that have yet to be confirmed, and do not yet count toward the current balance Total of transactions that have yet to be confirmed, and do not yet count toward the current balance out of sync out of sync PaymentServer Cannot start litecoin: click-to-pay handler Cannot start litecoin: click-to-pay handler QRCodeDialog QR Code Dialog QR Code Dialog Request Payment Request Payment Amount: Amount: Label: Label: Message: Message: &Save As... &Save As... Error encoding URI into QR Code. Error encoding URI into QR Code. The entered amount is invalid, please check. The entered amount is invalid, please check. Resulting URI too long, try to reduce the text for label / message. Resulting URI too long, try to reduce the text for label / message. Save QR Code Save QR Code PNG Images (*.png) PNG Images (*.png) RPCConsole Client name Client name N/A N/A Client version Client version &Information &Information Using OpenSSL version Using OpenSSL version Startup time Startup time Network Network Number of connections Number of connections On testnet On testnet Block chain Block chain Current number of blocks Current number of blocks Estimated total blocks Estimated total blocks Last block time Last block time &Open &Open Command-line options Command-line options Show the Litecoin-Qt help message to get a list with possible Litecoin command-line options. Show the Litecoin-Qt help message to get a list with possible Litecoin command-line options. &Show &Show &Console &Console Build date Build date Litecoin - Debug window Litecoin - Debug window Litecoin Core Litecoin Core Debug log file Debug log file Open the Litecoin debug log file from the current data directory. This can take a few seconds for large log files. Open the Litecoin debug log file from the current data directory. This can take a few seconds for large log files. Clear console Clear console Welcome to the Litecoin RPC console. Welcome to the Litecoin RPC console. Use up and down arrows to navigate history, and Ctrl-L to clear screen. Use up and down arrows to navigate history, and Ctrl-L to clear screen. Type help for an overview of available commands. Type help for an overview of available commands. SendCoinsDialog Send Coins Send Coins Send to multiple recipients at once Send to multiple recipients at once Add &Recipient Add &Recipient Remove all transaction fields Remove all transaction fields Clear &All Clear &All Balance: Balance: 123.456 BTC 123.456 BTC Confirm the send action Confirm the send action S&end S&end %1 to %2 (%3) %1 to %2 (%3) Confirm send coins Confirm send coins Are you sure you want to send %1? Are you sure you want to send %1? and and The recipient address is not valid, please recheck. The recipient address is not valid, please recheck. The amount to pay must be larger than 0. The amount to pay must be larger than 0. The amount exceeds your balance. The amount exceeds your balance. The total exceeds your balance when the %1 transaction fee is included. The total exceeds your balance when the %1 transaction fee is included. Duplicate address found, can only send to each address once per send operation. Duplicate address found, can only send to each address once per send operation. Error: Transaction creation failed! Error: Transaction creation failed! Error: The transaction was rejected. This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Error: The transaction was rejected. This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. SendCoinsEntry Form Form A&mount: A&mount: Pay &To: Pay &To: The address to send the payment to (e.g. Ler4HNAEfwYhBmGXcFP2Po1NpRUEiK8km2) The address to send the payment to (e.g. Ler4HNAEfwYhBmGXcFP2Po1NpRUEiK8km2) Enter a label for this address to add it to your address book Enter a label for this address to add it to your address book &Label: &Label: Choose address from address book Choose address from address book Alt+A Alt+A Paste address from clipboard Paste address from clipboard Alt+P Alt+P Remove this recipient Remove this recipient Enter a Litecoin address (e.g. Ler4HNAEfwYhBmGXcFP2Po1NpRUEiK8km2) Enter a Litecoin address (e.g. Ler4HNAEfwYhBmGXcFP2Po1NpRUEiK8km2) SignVerifyMessageDialog Signatures - Sign / Verify a Message Signatures - Sign / Verify a Message &Sign Message &Sign Message You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. The address to sign the message with (e.g. Ler4HNAEfwYhBmGXcFP2Po1NpRUEiK8km2) The address to sign the message with (e.g. Ler4HNAEfwYhBmGXcFP2Po1NpRUEiK8km2) Choose an address from the address book Choose an address from the address book Alt+A Alt+A Paste address from clipboard Paste address from clipboard Alt+P Alt+P Enter the message you want to sign here Enter the message you want to sign here Signature Signature Copy the current signature to the system clipboard Copy the current signature to the system clipboard Sign the message to prove you own this Litecoin address Sign the message to prove you own this Litecoin address Sign &Message Sign &Message Reset all sign message fields Reset all sign message fields Clear &All Clear &All &Verify Message &Verify Message Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. The address the message was signed with (e.g. Ler4HNAEfwYhBmGXcFP2Po1NpRUEiK8km2) The address the message was signed with (e.g. Ler4HNAEfwYhBmGXcFP2Po1NpRUEiK8km2) Verify the message to ensure it was signed with the specified Litecoin address Verify the message to ensure it was signed with the specified Litecoin address Verify &Message Verify &Message Reset all verify message fields Reset all verify message fields Enter a Litecoin address (e.g. Ler4HNAEfwYhBmGXcFP2Po1NpRUEiK8km2) Enter a Litecoin address (e.g. Ler4HNAEfwYhBmGXcFP2Po1NpRUEiK8km2) Click "Sign Message" to generate signature Click "Sign Message" to generate signature Enter Litecoin signature Enter Litecoin signature The entered address is invalid. The entered address is invalid. Please check the address and try again. Please check the address and try again. The entered address does not refer to a key. The entered address does not refer to a key. Wallet unlock was cancelled. Wallet unlock was cancelled. Private key for the entered address is not available. Private key for the entered address is not available. Message signing failed. Message signing failed. Message signed. Message signed. The signature could not be decoded. The signature could not be decoded. Please check the signature and try again. Please check the signature and try again. The signature did not match the message digest. The signature did not match the message digest. Message verification failed. Message verification failed. Message verified. Message verified. SplashScreen The Litecoin developers The Litecoin developers [testnet] [testnet] TransactionDesc Open until %1 Open until %1 %1/offline %1/offline %1/unconfirmed %1/unconfirmed %1 confirmations %1 confirmations Status Status , broadcast through %n node(s) , broadcast through %n node , broadcast through %n nodes Date Date Source Source Generated Generated From From To To own address own address label label Credit Credit matures in %n more block(s) matures in %n more block matures in %n more blocks not accepted not accepted Debit Debit Transaction fee Transaction fee Net amount Net amount Message Message Comment Comment Transaction ID Transaction ID Generated coins must mature 120 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. Generated coins must mature 120 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. Debug information Debug information Transaction Transaction Inputs Inputs Amount Amount true true false false , has not been successfully broadcast yet , has not been successfully broadcast yet Open for %n more block(s) Open for %n more block Open for %n more blocks unknown unknown TransactionDescDialog Transaction details Transaction details This pane shows a detailed description of the transaction This pane shows a detailed description of the transaction TransactionTableModel Date Date Type Type Address Address Amount Amount Open for %n more block(s) Open for %n more block Open for %n more blocks Open until %1 Open until %1 Offline (%1 confirmations) Offline (%1 confirmations) Unconfirmed (%1 of %2 confirmations) Unconfirmed (%1 of %2 confirmations) Confirmed (%1 confirmations) Confirmed (%1 confirmations) Mined balance will be available when it matures in %n more block(s) Mined balance will be available when it matures in %n more block Mined balance will be available when it matures in %n more blocks This block was not received by any other nodes and will probably not be accepted! This block was not received by any other nodes and will probably not be accepted! Generated but not accepted Generated but not accepted Received with Received with Received from Received from Sent to Sent to Payment to yourself Payment to yourself Mined Mined (n/a) (n/a) Transaction status. Hover over this field to show number of confirmations. Transaction status. Hover over this field to show number of confirmations. Date and time that the transaction was received. Date and time that the transaction was received. Type of transaction. Type of transaction. Destination address of transaction. Destination address of transaction. Amount removed from or added to balance. Amount removed from or added to balance. TransactionView All All Today Today This week This week This month This month Last month Last month This year This year Range... Range... Received with Received with Sent to Sent to To yourself To yourself Mined Mined Other Other Enter address or label to search Enter address or label to search Min amount Min amount Copy address Copy address Copy label Copy label Copy amount Copy amount Copy transaction ID Copy transaction ID Edit label Edit label Show transaction details Show transaction details Export Transaction Data Export Transaction Data Comma separated file (*.csv) Comma separated file (*.csv) Confirmed Confirmed Date Date Type Type Label Label Address Address Amount Amount ID ID Error exporting Error exporting Could not write to file %1. Could not write to file %1. Range: Range: to to WalletModel Send Coins Send Coins WalletView &Export &Export Export the data in the current tab to a file Export the data in the current tab to a file Backup Wallet Backup Wallet Wallet Data (*.dat) Wallet Data (*.dat) Backup Failed Backup Failed There was an error trying to save the wallet data to the new location. There was an error trying to save the wallet data to the new location. Backup Successful Backup Successful The wallet data was successfully saved to the new location. The wallet data was successfully saved to the new location. bitcoin-core Litecoin version Litecoin version Usage: Usage: Send command to -server or litecoind Send command to -server or litecoind List commands List commands Get help for a command Get help for a command Options: Options: Specify configuration file (default: litecoin.conf) Specify configuration file (default: litecoin.conf) Specify pid file (default: litecoind.pid) Specify pid file (default: litecoind.pid) Specify data directory Specify data directory Set database cache size in megabytes (default: 25) Set database cache size in megabytes (default: 25) Listen for connections on <port> (default: 9333 or testnet: 19333) Listen for connections on <port> (default: 9333 or testnet: 19333) Maintain at most <n> connections to peers (default: 125) Maintain at most <n> connections to peers (default: 125) Connect to a node to retrieve peer addresses, and disconnect Connect to a node to retrieve peer addresses, and disconnect Specify your own public address Specify your own public address Threshold for disconnecting misbehaving peers (default: 100) Threshold for disconnecting misbehaving peers (default: 100) Number of seconds to keep misbehaving peers from reconnecting (default: 86400) Number of seconds to keep misbehaving peers from reconnecting (default: 86400) An error occurred while setting up the RPC port %u for listening on IPv4: %s An error occurred while setting up the RPC port %u for listening on IPv4: %s Listen for JSON-RPC connections on <port> (default: 9332 or testnet: 19332) Listen for JSON-RPC connections on <port> (default: 9332 or testnet: 19332) Accept command line and JSON-RPC commands Accept command line and JSON-RPC commands Run in the background as a daemon and accept commands Run in the background as a daemon and accept commands Use the test network Use the test network Accept connections from outside (default: 1 if no -proxy or -connect) Accept connections from outside (default: 1 if no -proxy or -connect) %s, you must set a rpcpassword in the configuration file: %s It is recommended you use the following random password: rpcuser=litecoinrpc rpcpassword=%s (you do not need to remember this password) The username and password MUST NOT be the same. If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %%s | mail -s "Litecoin Alert" admin@foo.com %s, you must set a rpcpassword in the configuration file: %s It is recommended you use the following random password: rpcuser=litecoinrpc rpcpassword=%s (you do not need to remember this password) The username and password MUST NOT be the same. If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %%s | mail -s "Litecoin Alert" admin@foo.com An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s Bind to given address and always listen on it. Use [host]:port notation for IPv6 Bind to given address and always listen on it. Use [host]:port notation for IPv6 Cannot obtain a lock on data directory %s. Litecoin is probably already running. Cannot obtain a lock on data directory %s. Litecoin is probably already running. Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! Execute command when a relevant alert is received (%s in cmd is replaced by message) Execute command when a relevant alert is received (%s in cmd is replaced by message) Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) Set maximum size of high-priority/low-fee transactions in bytes (default: 27000) Set maximum size of high-priority/low-fee transactions in bytes (default: 27000) This is a pre-release test build - use at your own risk - do not use for mining or merchant applications This is a pre-release test build - use at your own risk - do not use for mining or merchant applications Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. Warning: Displayed transactions may not be correct! You may need to upgrade, or other nodes may need to upgrade. Warning: Displayed transactions may not be correct! You may need to upgrade, or other nodes may need to upgrade. Warning: Please check that your computer's date and time are correct! If your clock is wrong Litecoin will not work properly. Warning: Please check that your computer's date and time are correct! If your clock is wrong Litecoin will not work properly. Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect. Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect. Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. Attempt to recover private keys from a corrupt wallet.dat Attempt to recover private keys from a corrupt wallet.dat Block creation options: Block creation options: Connect only to the specified node(s) Connect only to the specified node(s) Corrupted block database detected Corrupted block database detected Discover own IP address (default: 1 when listening and no -externalip) Discover own IP address (default: 1 when listening and no -externalip) Do you want to rebuild the block database now? Do you want to rebuild the block database now? Error initializing block database Error initializing block database Error initializing wallet database environment %s! Error initializing wallet database environment %s! Error loading block database Error loading block database Error opening block database Error opening block database Error: Disk space is low! Error: Disk space is low! Error: Wallet locked, unable to create transaction! Error: Wallet locked, unable to create transaction! Error: system error: Error: system error: Failed to listen on any port. Use -listen=0 if you want this. Failed to listen on any port. Use -listen=0 if you want this. Failed to read block info Failed to read block info Failed to read block Failed to read block Failed to sync block index Failed to sync block index Failed to write block index Failed to write block index Failed to write block info Failed to write block info Failed to write block Failed to write block Failed to write file info Failed to write file info Failed to write to coin database Failed to write to coin database Failed to write transaction index Failed to write transaction index Failed to write undo data Failed to write undo data Find peers using DNS lookup (default: 1 unless -connect) Find peers using DNS lookup (default: 1 unless -connect) Generate coins (default: 0) Generate coins (default: 0) How many blocks to check at startup (default: 288, 0 = all) How many blocks to check at startup (default: 288, 0 = all) How thorough the block verification is (0-4, default: 3) How thorough the block verification is (0-4, default: 3) Not enough file descriptors available. Not enough file descriptors available. Rebuild block chain index from current blk000??.dat files Rebuild block chain index from current blk000??.dat files Set the number of threads to service RPC calls (default: 4) Set the number of threads to service RPC calls (default: 4) Verifying blocks... Verifying blocks... Verifying wallet... Verifying wallet... Imports blocks from external blk000??.dat file Imports blocks from external blk000??.dat file Set the number of script verification threads (up to 16, 0 = auto, <0 = leave that many cores free, default: 0) Set the number of script verification threads (up to 16, 0 = auto, <0 = leave that many cores free, default: 0) Information Information Invalid -tor address: '%s' Invalid -tor address: '%s' Invalid amount for -minrelaytxfee=<amount>: '%s' Invalid amount for -minrelaytxfee=<amount>: '%s' Invalid amount for -mintxfee=<amount>: '%s' Invalid amount for -mintxfee=<amount>: '%s' Maintain a full transaction index (default: 0) Maintain a full transaction index (default: 0) Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000) Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000) Maximum per-connection send buffer, <n>*1000 bytes (default: 1000) Maximum per-connection send buffer, <n>*1000 bytes (default: 1000) Only accept block chain matching built-in checkpoints (default: 1) Only accept block chain matching built-in checkpoints (default: 1) Only connect to nodes in network <net> (IPv4, IPv6 or Tor) Only connect to nodes in network <net> (IPv4, IPv6 or Tor) Output extra debugging information. Implies all other -debug* options Output extra debugging information. Implies all other -debug* options Output extra network debugging information Output extra network debugging information Prepend debug output with timestamp Prepend debug output with timestamp SSL options: (see the Litecoin Wiki for SSL setup instructions) SSL options: (see the Litecoin Wiki for SSL setup instructions) Select the version of socks proxy to use (4-5, default: 5) Select the version of socks proxy to use (4-5, default: 5) Send trace/debug info to console instead of debug.log file Send trace/debug info to console instead of debug.log file Send trace/debug info to debugger Send trace/debug info to debugger Set maximum block size in bytes (default: 250000) Set maximum block size in bytes (default: 250000) Set minimum block size in bytes (default: 0) Set minimum block size in bytes (default: 0) Shrink debug.log file on client startup (default: 1 when no -debug) Shrink debug.log file on client startup (default: 1 when no -debug) Signing transaction failed Signing transaction failed Specify connection timeout in milliseconds (default: 5000) Specify connection timeout in milliseconds (default: 5000) System error: System error: Transaction amount too small Transaction amount too small Transaction amounts must be positive Transaction amounts must be positive Transaction too large Transaction too large Use UPnP to map the listening port (default: 0) Use UPnP to map the listening port (default: 0) Use UPnP to map the listening port (default: 1 when listening) Use UPnP to map the listening port (default: 1 when listening) Use proxy to reach tor hidden services (default: same as -proxy) Use proxy to reach tor hidden services (default: same as -proxy) Username for JSON-RPC connections Username for JSON-RPC connections Warning Warning Warning: This version is obsolete, upgrade required! Warning: This version is obsolete, upgrade required! You need to rebuild the databases using -reindex to change -txindex You need to rebuild the databases using -reindex to change -txindex wallet.dat corrupt, salvage failed wallet.dat corrupt, salvage failed Password for JSON-RPC connections Password for JSON-RPC connections Allow JSON-RPC connections from specified IP address Allow JSON-RPC connections from specified IP address Send commands to node running on <ip> (default: 127.0.0.1) Send commands to node running on <ip> (default: 127.0.0.1) Execute command when the best block changes (%s in cmd is replaced by block hash) Execute command when the best block changes (%s in cmd is replaced by block hash) Upgrade wallet to latest format Upgrade wallet to latest format Set key pool size to <n> (default: 100) Set key pool size to <n> (default: 100) Rescan the block chain for missing wallet transactions Rescan the block chain for missing wallet transactions Use OpenSSL (https) for JSON-RPC connections Use OpenSSL (https) for JSON-RPC connections Server certificate file (default: server.cert) Server certificate file (default: server.cert) Server private key (default: server.pem) Server private key (default: server.pem) Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH) Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH) This help message This help message Unable to bind to %s on this computer (bind returned error %d, %s) Unable to bind to %s on this computer (bind returned error %d, %s) Connect through socks proxy Connect through socks proxy Allow DNS lookups for -addnode, -seednode and -connect Allow DNS lookups for -addnode, -seednode and -connect Loading addresses... Loading addresses... Error loading wallet.dat: Wallet corrupted Error loading wallet.dat: Wallet corrupted Error loading wallet.dat: Wallet requires newer version of Litecoin Error loading wallet.dat: Wallet requires newer version of Litecoin Wallet needed to be rewritten: restart Litecoin to complete Wallet needed to be rewritten: restart Litecoin to complete Error loading wallet.dat Error loading wallet.dat Invalid -proxy address: '%s' Invalid -proxy address: '%s' Unknown network specified in -onlynet: '%s' Unknown network specified in -onlynet: '%s' Unknown -socks proxy version requested: %i Unknown -socks proxy version requested: %i Cannot resolve -bind address: '%s' Cannot resolve -bind address: '%s' Cannot resolve -externalip address: '%s' Cannot resolve -externalip address: '%s' Invalid amount for -paytxfee=<amount>: '%s' Invalid amount for -paytxfee=<amount>: '%s' Invalid amount Invalid amount Insufficient funds Insufficient funds Loading block index... Loading block index... Add a node to connect to and attempt to keep the connection open Add a node to connect to and attempt to keep the connection open Unable to bind to %s on this computer. Litecoin is probably already running. Unable to bind to %s on this computer. Litecoin is probably already running. Fee per KB to add to transactions you send Fee per KB to add to transactions you send Loading wallet... Loading wallet... Cannot downgrade wallet Cannot downgrade wallet Cannot write default address Cannot write default address Rescanning... Rescanning... Done loading Done loading To use the %s option To use the %s option Error Error You must set rpcpassword=<password> in the configuration file: %s If the file does not exist, create it with owner-readable-only file permissions. You must set rpcpassword=<password> in the configuration file: %s If the file does not exist, create it with owner-readable-only file permissions.