aria2 1.16.5 ============ Release Note ------------ This release fixes the bug that invalid range error is thrown when requesting range starts from 0 in HTTP download. Changes ------- * Fix bug that invalid range error when requesting range starting 0 Since the change b782a56b, we use endOffsetOverride_ as the return value of getEndByte(). But aria2 does not send Range header field when range starts 0 (this is because some server returns error if it received Range: 0-), and the HttpRequest::isRangeSatisfied() checks the equality of getEndByte() and the end byte in response header and fails. The fix is send Range header if getEndByte() is set. aria2 1.16.4 ============ Release Note ------------ This release fixes the bug that active downloads are not saved with --save-session-interval and the bug that aria2 hangs when size of download result exceeds its maximum. BitTorrent UDP tracker support was added. If the filename specified using --save-session ends with ".gz", aria2 stores the session file in gzipped form. The -i option can handle this gzipped file as well as plain text file. 1.15.2 based Portuguese translated manual was added. Changes ------- * Make configure argument meaning more consistent and obvious. Most other software uses --disable/--without for features it does build or at least check by default. Change aria2 configure options so that: * --enable-*: do not build by default, unless --enable specified * --disable-*: check and build by default, unless --disable specified * --with-*: do not use by default, unless --with specified * --without-*: check and use by default, unless without specified Contributed by Nils Maier * Allow for out-of-tree Sphinx builds Contributed by Nils Maier * Bring back datetime in console log * Run checksum check if -V and -c are used and file is completed With -c option, aria2 can continue download after the existing file position. If it is not completed, then after completion aria2 runs checksum checking if available. But if existing file has already been completed, then CreateRequestCommand exits without issuing checksum checking. And aria2 treats it download error because it needs checksum verification but it has not been done. This change fixes this by properly checking download state and issue checksum checking before CreateRequestCommand. * Support for gzipped -i and --save-session Saved sessions may very large, as in hundreds and even thousands of megabyte when dealing with large queues. Add support to save and reload sessions to gzipped files, when libz is available. The session serializer will output gzipped contents when the file ends with .gz, while the input file reader (UriListParser) will accept whatever is thrown at it. Document -i/--save-session gzip behaviour Contributed by Nils Maier * Do not use a virtual varargs function This stuff breaks in some compiler (configurations) Contributed by Nils Maier * Check for sys/signal.h and/or signal.h mingw-w64 does not actually have sys/signal.h, while OSX currently has a broken signal.h Better check the presence of both and use sys/signal.h if present, else signal.h Contributed by Nils Maier * Hygiene: Fix some clang warnings, mostly unused private members. Contributed by Nils Maier * Fix bustage on OSX with ./configure CC=cc CXX=c++ (clang) Contributed by Nils Maier * Do not reference RequestGroups longer than necessary There is an initial vector of SharedHandle to seed the DownloadEngine. This vector was however kept alive via main.cc -> MultiUrlRequestInfo up until the program exits, hence effetively leaking all initial RequestGroups and associated object instances. Hence, as a matter of dirty-workaround, drop the contents of that initial vector as soon as it is not required any longer. Contributed by Nils Maier * Detect console with on Windows Contributed by Nils Maier * Fix infinite loop when size of downloadResults_ exceeds maxDownloadResult_ * Support BitTorrent UDP tracker It shares UDP listening port with IPv4 DHT. At the moment, in order to enable UDP tracker support, enable IPv4 DHT. * Show correct end byte in error message when HTTP response range is not ok Previously, unless HTTP pipelining is enabled, end byte in that message is always 0. With this change, it shows correct end byte sent to the HTTP server. * Add Portuguese manual This translation is based on aria2 version 1.15.2 manual. Contributed by Gilberto dos Santos Alves * Fix bug that active downloads are not saved with --save-session-interval aria2 1.16.3 ============ Release Note ------------ This release fixes the bug which causes random crash. It also fixes socket option setting failure on Windows platform. Changes ------- * Fix failure to set TCP_NODELAY on Windows On Windows setting TCP_NODELAY after non-blocking connect fails at least on Windows 7. * Fix invalid iterator handling when deleting RequestGroup aria2 1.16.2 ============ Release Note ------------ This release fixes the bug which causes long running BitTorrent download to stall. The several new options have been added. Changes ------- * Check SSL_OP_NO_COMPRESSION is available before using it * Fix bug returnPeer is not called if sequence_ == INITIATOR_SEND_KEY In InitiatorMSEHandshakeCommand, when aborting connection, we must return peer to the PeerStorage. But it is not done if sequence_ is INITIATOR_SEND_KEY. This causes stale Peer objects whose usedBy() returns true eventually occupies peer list and aria2 cannot make any connections. * Accept k and m as well as K and M in util::getRealSize() * mingw32: Make NTFS sparse file on --file-allocation=trunc * Added --save-session-interval option --save-session-interval option saves error/unfinished downloads to a file specified by --save-session option every SEC seconds. If 0 is given, file will be saved only when aria2 exits. * Use request URI as referer if --referer="*" is given * Log warn if unknown option is found in config file or -i file * Added --console-log-level option --console-log-level option sets log level to output to console. aria2 1.16.1 ============ Release Note ------------ This release adds the ability to persist GID across sessions. The GID will be saved with --save-session. There are several restrictions how GID is persisted. See the manual for details. For this change, now GID is 64 bits binary data and represented by 16 characters hex string in RPC query. The disk cache feature was added, which may reduce disk activity. The console readout was redesigned. The warning displayed when --file-allocation=falloc is used on MinGW32 build was removed as a bug. Changes ------- * mingw32: Re-open files with read-only mode enabled on seeding On Mingw32 build, if aria2 opens file with GENERIC_WRITE access right, some programs cannot open the file aria2 is seeding. To avoid this situation, re-open files with read-only enabled when seeding is about to begin. * Save gid option with --save-session option * Added --gid option This option sets GID manually. aria2 identifies each download by the ID called GID. The GID must be hex string of 16 characters, thus [0-9a-zA-Z] are allowed and leading zeros must not be stripped. The GID all 0 is reserved and must not be used. The GID must be unique, otherwise error is reported and the download is not added. This option is useful when restoring the sessions saved using --save-session option. If this option is not used, new GID is generated by aria2. * Use 64 bits random bytes as GID This change replaces the current 64 bit sequential GID with 64 bits random bytes GID in an attempt to support persistent GID. Internally, the GID is stored as uint64_t. For human representation and RPC interface, GID is represented as 16 bytes hex string. For console readout, 16 bytes are too long, so it is abbreviated to first 6 bytes. When querying GID in RPC calls, user can speicfy the prefix of GID as long as the prefix is shared by more than 1 GID entries. * Fixed BitfieldMan::getOffsetCompletedLength overflow on 32-bit systems * mingw32: Use HANDLE only for MinGW32 build * Changed console readout, making it more compact "SIZE:" is removed because it is obvious. SEEDING, SEED, SPD and UP are now replaced with SEED, SD, DL and UL respectively. * Compact readout when more than 1 simultaneous downloads are going on If more than 1 simultaneous downloads are going on, use more compact format in readout. Currently, at most 5 download stats are displayed. util::abbrevSize() is rewritten to support "Gi" unit and provides more compact abbreviation. * Console color output Log level and download result string is now colored. * Logger: Simplified console output and change level format in log The date and time are now removed from console output. The log level is now formatted as "[LEVEL]". * Start to find faster host before the number of missing segments becomes 1 The old implementation starts to find faster host when the number of missing segment becomes 1. Because of --min-split-size option, before the number of missing segment becomes 1, the number of connection becomes 1 and it can be slow. In this case, we have to wait until the last segment is reached. The new implementation starts to find faster host when the remaining length is less than --min-split-size * 2, to mitigate the problem stated above. * Removed warning when --file-allocation=falloc is used in MinGW32 build The warning was just a mistake. SetFilePointerEx + SetEndOfFile actually allocate disk space. * Write data in 4K aligned offset in write with disk cache enabled This greatly reduces disk activity especially on Win + NTFS. Not so much difference on Linux. * mingw32: Removed FSCTL_SET_SPARSE set * Added --disk-cache option This option enables disk cache. If SIZE is 0, the disk cache is disabled. This feature caches the downloaded data in memory, which grows to at most SIZE bytes. The cache storage is created for aria2 instance and shared by all downloads. The one advantage of the disk cache is reduce the disk seek time because the data is written in larger unit and it is reordered by the offset of the file. If the underlying file is heavily fragmented it is not the case. aria2 1.16.0 ============ Release Note ------------ This release adds SSL/TLS encryption support in RPC transport. The new RPC method aria2.appendUri is added, which is a wrapper to aria2.changeUri. The Content-Disposition parser is now RFC 6266 conformant. The resource leak in XmlParser, JSON and Bencode parser was fixed. The uploaded data size calculation bug was fixed. For MinGW32 build, files are now opened with read/write shared mode. Changes ------- * mingw32: Open file using _wsopen and added --enable-mmap support I tried CreateFile but the subsequent ReadFile fails with Access Denied if sparse file is read on NTFS. I mostly reverted previous changes and use _wsopen with read/write share enabled instead of CreateFile. This change also includes --enable-mmap support for MinGW32 build. Memory mapped file may be useful for 64-bits OS and lots of RAM. Currently, FlushViewOfFile is not called during the download, so it is slightly vulnerable against sudden power loss. I found lots of read when resuming download due to page fault. So for now it is useful for the initial download. I recommend not to use --file-allocation=prealloc with --enable-mmap for MinGW32, because it triggers page faults even in the initial download. Anyway, the option is experimental. * Removed PO files and generated aria2.pot from repository Currently, message translation is done at launchpad. All PO files can be exported from there. The merge process from launchpad is done when new release. First download export file from launchpad And use import-po script to import PO files into po directory. * Set F_GLOBAL_NOCACHE for Mac OS X * Enabled TCP_NODELAY * Don't use AC_FUNC_MMAP Don't use AC_FUNC_MMAP becaue it fails on some platforms (e.g., OpenWRT) which have mmap and it works in the way we use in aria2. Instead use mmap in AC_CHECK_FUNCS list. * Added --force-save option. --force-save option saves download with --save-session option even if the download is completed or removed. This may be useful to save BitTorrent seeding which is recognized as completed state. The default value is false. * Get the correct uploaded data size Subtract msgHdrLen_ from writtenLength to get the uploaded data size. Without this correction, the seeder assumes it has uploaded more data than it actually has. * Made --http-no-cache false by default * Fixed memory leak in AsyncNameResolver * Fixed resource leak in XmlParser and GenericParser * Reset iostream format state * gnutls: Added more status checking when verifying peer * Content-Disposition parser conforming to RFC 6266. RFC 2231 Continuation is not supported. * Reworked download/upload statistics calculation The old implementation calculates download/upload statistics for a RequestGroup by summing up all PeerStat objects. For global statistics, those are summed together. This clearly incurs runtime penalty and we introduced some kind of caching which updates statistics every 250ms but it did not work right. This change removes all these aggregation code, and instead makes RequestGroup and RequestGroupMan objects hold NetStat object and download/upload bytes are directly calculated by thier own NetStat. This is far more simplar than the old way and less runtime penalty and brings more accuracy. * Added --rpc-save-upload-metadata option If true is given, which is default, save the uploaded torrent or metalink metadata in the directory specified by --dir option. The filename consists of SHA1-hash hex string of metadata plus extension. For torrent, the extension is '.torrent'. For metalink, it is '.meta4'. If false is given to this option, the downloads added by aria2.addTorrent or aria2.addMetalink will not be saved by --save-session option. * Perform SSL/TLS handshake after checking whether connection is established * Fixed bug that --enable-mmap won't work if MultiDiskAdaptor is used * RPC over SSL/TLS transport To enable RPC over SSL/TLS, specify server certificate and private key using --rpc-certificate and --rpc-private-key options and enable --rpc-secure option. After the encryption is enabled, use https and wss scheme to access RPC server. * aria2rpc: Added appendUri command This command calls aria2.changeUri(GID, fileIndex, [], [URI,...]) internally. * Don't send Proxy-Connection header field * Don't set SNI hostname if it does not include "." for GNUTLS * Disable SSL/TLS compression with OpenSSL * Pause download even if download is completed This allows to pause and unpause BitTorrent seed. * Use execlp() instead of execl()