# satisfy kwalitee test use strict; =encoding utf8 DBD::ODBC::Changes - Log of significant changes to the DBD::ODBC 1.58 2018-03-01 [MISCELLANEOUS] Various changes to the test suite to get better results with Postgres 1.57 2018-03-01 [MISCELLANEOUS] Merged pull request 6 from genio which allows Makefile.PL argument -u to be set via the environment variable DBD_ODBC_UNICODE This version was removed from CPAN because it was uploaded with a nasty bug in the diagnostics code. 1.56 2016-10-06 Full release of the 1.53 development series One version skipped because of indexing problems. 1.53_2 2016-02-03 [MISCELLANEOUS] Add new FAQs 1.53_1 2015-10-16 [BUG FIXES] Strictly speaking this is a bug fix to DBI and not DBD::ODBC but DBI now supports 64 bit row counts where an IV in perl is 64 bits. However, it necessitated changes to DBD::ODBC to pick up the fix. odbc_rows (my workaround since 2012) is still supported but should no longer be required so long as you use this DBD::ODBC and DBI 1.633_92 or above. [INTERNALS] Removed dbd_st_rows and now setting DBIc_ROW_COUNT. [DOCUMENTATION] Add tables and table_info section to deviations from the DBI spec. [MISCELLANEOUS] Change column name in t/rt_101579.t as "method" is a reserved word in. Teradata Thanks to Zhenyi Zhou. Remove duplicate dynamic_config from META.yml. 1.52 2015-04-15 [MISCELLANEOUS] Changes to the test suite to make it run better with Postgres thanks to Greg Sabino Mullane. 1.51_4 2015-01-18 [BUG FIXES] Numerous errors in the test suite (with SQLite ODBC driver) mostly down to not creating the test table first. [MISCELLANEOUS] Try and make the test suite run ok for SQLite ODBC driver so I can use it in travis-ci. 1.51_3 2015-01-17 [BUG FIXES] RT101579 - using bound input parameters for numeric columns (e.g., SQL_NUMERIC) only works the first time and will quite likely fail with "string data, right truncation" on the second and subsequent calls to execute. Thanks to Laura Cox for finding. 1.51_2 2014-11-19 [BUG FIXES] The table_info method (ANSI version only) was incorrectly passing the table name for the type argument. I think this bug was introduced last year. Thanks to Nick Gorham for spotting and providing a fix. 1.51_1 2014-11-14 [BUG FIXES] RT100186 - handle VARBINARY(MAX) parameters with SQL Server native client. Identify "libmsodbcsql*" as the MS ODBC Driver for Linux as there are some specific workarounds for MS Native Client ODBC driver. 1.50 2014-07-25 [BUG FIXES] The 80_odbc_diags.t test could fail if a driver fails a table does not exist test in the prepare instead of the execute. 1.49_4 2014-07-08 [BUG FIXES] Fixed sql_type_cast.t test which assumed column aliases which stay lowercase. Fixed 87_odbc_lob_read.t test which did not bow out of the test properly if the database was not MS SQL Server. [DOCUMENTATION] Revised the query notification example and documentation. Added a link to a better Query Notification article. 1.49_3 2014-05-01 [CHANGE IN BEHAVIOUR] As warned years ago, this release removes the odbc_old_unicode attribute. If you have a good reason to use it speak up now before the next non-development release. [BUG FIXES] Fix rt89255: Fails to create test table for tests using PostgreSQL odbc driver. Change test suite to fallback on PRECISION if COLUMN_SIZE is not found. [ENHANCEMENTS] Added support for MS SQL Server Query Notification. See the new section in the pod. Added a currently undocumented (and experimental) odbc_describe_param method on a statement handle which takes a parameter number as the only argument and returns an array of the data type, parameter size, decimal digits and nullable (as per SQLDescribeParam). [DOCUMENTATION] Added FAQ on truncated column names with freeTDS. [MISCELLANEOUS] I have removed the "experimental" tag for odbc_getdiagfield and odbc_getdiagrec methods. 1.49_2 2014-04-26 [BUG FIXES] Change to data_sources in 1.49_1 could lead to a compile error since data_sources was not returning a value if an error occurred. 1.49_1 2014-04-25 [BUG FIXES] If you had a lot of DSNs on Windows (more than 280 but it depends on the length of their names) and called the data_sources method it could crash your script. Code internally changed to stop putting the DSNs returned on the stack. [CHANGE IN BEHAVIOUR] As warned years ago, the private data_sources method has been removed - use DBI one instead. [MISCELLANEOUS] Added FAQ entry of maximum number of allowed parameters. 1.48 2014-03-03 [MISCELLANEOUS] Manifest has wrong filename for 90_trace_flags.t Forgot to remove warning from ODBC.pm that this is a development release and unicode change when I released 1.47. 1.47 2014-02-19 Full release of the 1.46 development releases. [MISCELLANEOUS] Just some tidying up of dbdimp.c - shouldn't make a difference to anyone. Further changes to this change file to make it CPAN::Changes spec. NOTE the changes.cpanhq.com site does not yet support "unknown" for dates. 1.46_2 2013-12-17 [BUG FIXES] When built with unicode support and odbc_old_unicode is not enabled columns reported as SQL_LONGVARCHAR were not by default bound as SQL_WCHAR and hence were not returned correctly unless the bind was overridden. [MISCELLANEOUS] Added test 90_trace_flag.t 1.46_1 2013-11-16 [CHANGE IN BEHAVIOUR] As warned in release 1.45, the binding of unicode parameters to char/varchar columns has changed significantly. If you don't attempt to insert unicode into char/varchar columns or if you only inserted unicode into nchar/nvarchar columns you should see no difference. From this release, unicode data inserted into char/varchar/longvarchar columns is bound as SQL_WCHAR and not whatever the driver reports the parameter as (which is mostly SQL_CHAR). Previously if DBD::ODBC received an error or (SQL_SUCCESS_WITH_INFO) from an ODBC API call and then the driver refused to return the error state/text DBD::ODBC would issue its own error saying "Unable to fetch information about the error" and state IM008. That state was wrong and has been changed to HY000. [BUG FIXES] Some drivers cannot support catalogs and/or schema names in SQLTables. Recent changes set the schema/catalog name to the empty string (good reasons below) which causes "optional feature not implemented" from MS Access (which does not support schemas - even for a simply ping (which uses SQLTables)). Now we call SQLCATALOG_NAME and SQLSCHEMA_USAGE on connect to ascertain support which modifies SQLTables call. [MISCELLANEOUS] Added test 45_unicode_varchar.t for MS SQL Server only so far. 1.45 2013-10-28 [CHANGE IN BEHAVIOUR] There is no intentional change in behaviour in this release but I'm adding a warning that the next development release is highly liking to contain some significant unicode changes in behaviour to fix some bugs which have been around for quite a long time now. [BUG FIXES] If an SQLExecute ODBC API call returned SQL_NO_DATA DBD::ODBC was still calling SQLError (which was a waste of time). Since 1.44_1 odbc_out_connect_string stopped returning anything. [MISCELLANEOUS] Added another link to resources for supplementary characters. Added 1 more test to 20SqlServer.t for update statement. Small changes to 20SqlServer.t test to skip some tests and note the problem if SQLExecute returns SQL_NO_DATA on a non searched update. 1.44_4 2013-10-16 [BUG FIXES] Fix method redefinition warnings in threads on Perl >= 5.16 thanks Dagfinn Ilmari Mannsåker [MISCELLANEOUS] Changed this Changes file to be closer to the version 0.03 change file spec. Added t/version.t test. Added recommends Test::Version. Updates to the odbc_more_results pod to help clarify its use after some confusion was seen in a perlmonks thread. 1.44_3 2013-10-11 [CHANGE IN BEHAVIOUR] If you attempt to set the ReadOnly attribute and the underlying ODBC driver does not support this (SQL_SUCCESS_WITH_INFO and "option value changed" is returned) a warning is issued. However, until RT 89015 "You cannot issue a warning in the STORE method" in DBI is resolved you won't get this warning. As DBI 1.628 it is not resolved. I've only seen the SQLite ODBC driver do this. If you set ReadOnly and the underlying ODBC driver does not support this then any subsequent attempts to fetch the ReadOnly attribute will return the value you set. [BUG FIXES] The 82_table_info test assumed all database and ODBC Drivers supported catalogs and schemas (some don't). Use get_info to find out if catalogs and schemas are supported before running these tests. The rt_79190.t could incorrectly fail if your test DSN contained the DRIVER attribute. [MISCELLANEOUS] Added RedHat spec file to examples courtesy of Michiel Beijen. Added "use strict" to FAQ/Changes etc to quieten kwalitee test. Added a workaround in the test suite for a probable bug in the postgres ODBC driver which does not return COLUMN_SIZE from SQLGetTypeInfo. It also issues a warning. See http://www.postgresql.org/message-id/524EF455.6050409@ntlworld.com 1.44_3 2013-10-11 [MISCELLANEOUS] Skip 70execute_array_native.t test if MS Access - even if behind an ODBC Bridge. Fixed some compiler warnings when attempting to print/trace SvCUR. 1.44_2 2013-09-07 [BUG FIXES] When table_info was called with a '%' for any one of the catalog, schema or type arguments with the rest all '' (the empty string), only a list of catalogs, schemas or types should be returned. It was not doing that as it was changing empty strings to undef/NULL. pod for odbc_lob_read had an example only saying lob_read. TYPE attribute for odbc_lob_read was actually coded as Type. It is now as documented. The example lob_read.pl had the TYPE set to 999 from when I was testing it but it got checked in like this. MANIFEST contained column_info.pl but the file was coltest.pl [MISCELLANEOUS] Fixed RT 86379 - spelling mistakes in ODBC.pm and FAQ - thanks to David Steinbrunner. Added 82_table_info.t test. Added 87_odbc_log_read.t test. 1.44_1 2013-06-06 Moved from subversion to github as svn.perl.org is closing down. Changed docs to show new repository. [BUG FIXES] Fixed RT 84450 - Database Handle Attribute Fetch broken. Thanks to Stephen Oberholtzer for finding and supplying patch. Fixed problem with attributes on bind_col not being sticky. You'll probably only see this if you are using fetchall_arrayref with a slice and setting TYPE or attributes in bind_col first. 1.43 2013-03-06 This is a full release of all the 1.42_* development releases. plus: [BUG FIXES] Minor fix to 10handler.t test suite which relied on a native error being true instead of defined. 1.42_5 2013-01-25 [BUG FIXES] Not all modules used in test code were specified in build_requires. 1.42_4 2013-01-21 [ENHANCEMENTS] odbc_trace and odbc_trace_file are now full connection attributes so you can set them any time you like, not just in connect. 1.42_3 2013-01-17 [ENHANCEMENTS] Added odbc_trace_file and odbc_trace attributes to the connect method so you can now enable ODBC API tracing from the connect method instead of having to use the ODBC Driver Manager. These also only enable ODBC API tracing in the application which made the call unlike the ODBC Driver Manager settings. 1.42_2 2012-12-17 [MISCELLANEOUS] Changed any use of if SvUPGRADE to remove the if test as per email from Dave Mitchell and posting at http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2012-12/msg00424.html. 1.42_1 2012-12-12 [BUG FIXES] DBD::ODBC's ExecDirect method did not return an SQLLEN so if you managed to affect a massive number of rows it would be cast to an int and hence precision lost. [CHANGE IN BEHAVIOUR] When you called DBI's execute method and odbc_exec_direct was not set (the default) if you managed to affect more rows than would fit into an int you would get the incorrect count (NOTE on 32 bit platforms ODBC's SQLRowCount can only return a 32bit value anyway). You would get whatever casting an SQLLEN to an int would give you. The fix for this needs a change to DBI (see RT 81911) and the change would probably impact every DBD so until then DBD::ODBC will a) warn if an overflow occurs and Warn is set on the handle b) return INT_MAX and c) provide a new statement method odbc_rows which you can use to get the correct value. [ENHANCEMENTS] New odbc_rows statement method (see above). [MISCELLANEOUS] New rt_81911.t test case. 1.42_0 2012-11-28 [BUG FIXES] MS Access requires a longchar column to be bound using SQL_LONGVARCHAR. However, MS Access does not support SQLDescribeParam and we default to SQL_VARCHAR in this case. The point at which we switch to SQL_LONGVARCHAR was defaulted to 4000 (for MS SQL Server). We now default to SQL_LONGVARCHAR for MS Access when data is > 255. This means you can remove those {TYPE => SQL_LONGVARCHAR} from your bind_param calls for longchar columns in MS Access. I seem to have introduced a bug in the test suite for MS Access. The last test in the 09bind test binds dates as varchars (by default) and this cannot work in MS Access (it needs to be a timestamp). This test was skipped in the past and the skip got removed. [MISCELLANEOUS] Steffen Goeldner reported some issues with execute_array in DBD::Oracle where if ArrayTupleStatus was not specified and an error occurred DBD::Oracle did not do the right thing. As I used DBD::Oracle as a base when I wrote execute_for_fetch in DBD::ODBC I added tests to the test suite to ensure these issues did not exist in DBD::ODBC. Minor change to sql_type_cast.t test which attempts to insert an integer into a varchar. No databases so far have complained about this until we ran the test against Derby. Changed to use '100'. RT 80446 - fix spelling mistake - thanks to Xavier Guimar. 1.41 2012-10-23 A full release of the 1.40 development release series. 1.40_3 2012-10-08 [BUG FIXES] Oops, changes to some rt tests fail when not run to MS SQL Server and they should not be run for other drivers - there was a double done_testing call. [CHANGE IN BEHAVIOUR] As I warned literally years ago DBD::ODBC's private function DescribeCol has been removed. You can use DBI's statement attributes like NAME, PRECISION etc, instead. All test code has been changed to remove calls to DescribeCol and GetTypeInfo. [MISCELLANEOUS] New example sqlserver_supplementary_chrs.pl added which shows that in MS SQL Server 2012 you can now store unicode characters over 0xFFFF (ones which are surrogate pairs). More documentation for odbc_out_connect_string. 1.40_2 2012-09-06 [BUG FIXES] Fixed rt 78838 - bind_param does not correctly stringify blessed objects when connected to MS SQL Server Fix issue in dbd_bind_ph where if you passed a sql type and were also attempting to change from in to out or vice versa or increasing the size of an output bound param it would not spot this error. Allowed the test cases to spot DB2 driver as libXXXdb2. [MISCELLANEOUS] New test cases added for some rts. Added Test::NoWarnings to some tests where it was missing. 1.40_1 2012-09-04 [BUG FIXES] Debian/Ubuntu have moved unixODBC into /usr/lib/i386-linux-gnu so look in this dir for unixODBC as well - thanks to Meastro for finding. Fixed rt 78838 I had a sequence point error which is only seen with some compilers as it is sometimes optimized out. It could cause DBD::ODBC to omit adding the UID/PWD to the end of the connection string when using DSN=. Thanks to Zsolt Cserna for spotting it and to ilmari and Leon for explaining it to me. Fixed rt 79397 Output bound parameters may be incorrectly bound if changed after bind_param_inout is called. If you start with an undef bound param and change it to a defined string/number less than 28 characters before calling execute the original undef will probably be bound. Thanks to runrig on perl monks for providing an example. [CHANGE IN BEHAVIOUR] If you attempt to bind an rv without amagic DBD::ODBC will now croak - related to rt 78838. 1.39 2012-07-07 [BUG FIXES] Manifest mentioned 2 files in examples which do not exist - they should have been execute_for_fetch.pl. execute_for_fetch.pl example had not be changed since odbc_disable_array_operations became odbc_array_operations. 1.38_3 2012-06-25 [BUG FIXES] Added encoding line to this file to stop pod test from complaining. [DOCUMENTATION] Added link to 64 bit ODBC article. Fixed some typos in the pod. [MISCELLANEOUS] Made pod.t an author test. 1.38_2 2012-05-24 [ENHANCEMENTS] Added support for Oracle TAF (assuming your ODBC driver supports it) - see odbc_taf_callback. 1.38_1 2012-05-19 [BUG FIXES] Fixed rt 77283. If you overrode the bind type as SQL_INTEGER in a bind_col call AFTER previously binding as another type (or not specifying a type) you would not get the right value back. This also fixes the DiscardString bind_col attribute for SQL_INTEGER binds (however, see below as DiscardString is no longer required for SQL_INTEGER). Fixed some format specifiers in trace calls. [CHANGE IN BEHAVIOUR] DBD::ODBC allowed you to change the bound column type in bind_col after the column was already bound. It now does not allow this and issues a warning. You can nolonger override the bound column type (except with SQL_NUMERIC and SQL_DOUBLE). All columns are now bound as either SQL_C_LONG (integer columns) or SQL_C_[W]CHAR (all other columns). If you are calling bind_col with a TYPE => xxx it most likely did not do what you expected and you should examine it carefully with a view to removing it altogether. As a result you no longer have to override the bind type for MS SQL Server XML columns - these will be bound as SQL_C_CHAR or SQL_C_WCHAR depending on whether Unicode is enabled. Integer columns are now bound as SQL_C_LONGs and not as before, SQL_C_CHAR. This should not matter to you but if you were adding 0 to your integer columns retrieved to make them behave like integers you should nolonger need to do it. [OTHER] Added some missing SQL_C_xxx types to S_SqlCTypeToString internal function. This only affects tracing. Some tests in 08bind were skipped when they did not need to be. sql_type_cast tests rewritten due to fixes above. 1.37 2012-04-07 A full release of the 1.36 dev releases. Please note the changes in behaviour below. 1.36_2 2012-03-31 [BUG FIXES] * not strictly a bug fix, more a workaround. MS Access mdb driver reports 22 for the size of doubles but then returns an empty string for long doubles that still fit in 22 chrs. rt 69864. [CHANGE IN BEHAVIOUR] * The odbc_disable_array_operations has been replaced with odbc_array_operations and the default for array operations is off. Sorry, but I warned this was experimental. The ODBC_DISABLE_ARRAY_OPERATIONS env var remains. [DOCUMENTATION] * Rewrote parts of "Unicode implementation in DBD::ODBC" to describe UTF-16/UCS-2 internal implementation. * Changed ordering of some of the pod sections. 1.36_1 2012-03-21 [BUG FIXES] * Fixed 12blob.t skip count when driver does not have a big enough varchar column to run the test. * Work around problems hit during the test suite in DB2 driver which only allows rows of size up to the page size and varchars of 4K. * Fix bug in execute_for_fetch where it would ignore the parameters processed when creating the ArrayTupleStatus and hence could attempt to call SQLGetDiagRec on a parameter row which was not executed. See the logs in rt 75687 which show this although this is not a fix for this rt. * The code wasn't catching success with info from SQLExecute in execute_for_fetch. * Add support for drivers (DB2 in this case) which return SQL_PARAM_DIAG_UNAVAILABLE in bound parameter status array when running execute_for_fetch. Any driver returning doing SQL_PARC_NO_BATCH from SQLGetInfo(SQL_PARAM_ARRAY_ROW_COUNTS) might do this. * Fix test code for execute_for_fetch to a) handle drivers doing SQL_PARC_NO_BATCH and b) add "not null" to primary key fields for drivers like DB2 which require it. [CHANGE IN BEHAVIOUR] * In execute_for_fetch set the parameter status array to all 9999 (which is invalid) so we can see if the ODBC driver actually sets them and we can warn if they don't. * For freeTDS default odbc_disable_array_operations to 1 as no version of the freeTDS driver can be found that works. I was requested to do this by the dbix-class guys. I may revert this later if freeTDS is fixed. * as above for MS Access. It is a shame I cannot find any way of finding out if a driver is capable of array operations. [ENHANCEMENTS] * execute_for_fetch code now checks the ODBC_DISABLE_ARRAY_OPERATIONS environment variable which can be set to 1 or 0 to override the internal default. [DOCUMENTATION] * Fixed ColAttributes example in pod which used a $dbh instead of a $sth. * Fixed DescribeCol example in pod which used a $dbh instead of a $sth. * new FAQ on SQLRowCount, freeTDS and execute_for_fetch * Fix typo shown in rt 75860. [OTHER] * Reduced usage of D_imp_xxx to avoid calls to dbih_getcom2. See thread on dbi-dev at http://www.mail-archive.com/dbi-dev@perl.org/msg06675.html * Changed the 70execute_array.t test to run it twice, once using DBI's methods and once using the native one in DBD::ODBC. * Made the 2 unicode tests work with DB2 ODBC driver. 1.35 2012-03-06 Full release of the 1.34 development releases 1.34_7 2012-03-02 [BUG FIXES] * Fixed more compiler errors highlighed by a smoker using MS Visual C where some code come before a variable definition. 1.34_6 2012-02-27 [BUG FIXES] * Fixed some compiler warnings and a compile error highlighed by a smoker using MS Visual C where some code come before a variable definition. 1.34_5 2012-02-17 [BUG FIXES] * The 40UnicodeRoundTrip tests counts could be 1 off in some cases. * Fix for t/03batt.t which could fail a test if the data source had no table - Kenichi Ishigaki * If a driver misbehaves during global destruction e.g. SQLFreeStmt fails but no error is available DBD::ODBC issues an error saying an error occurred but no error diagnostics could be found. This is pointless and irritating during global destruction. This stems from a change in 1.28. Thanks to Peter Rabbitson for reporting and suggested fix. [CHANGE IN BEHAVIOUR] * Prior to this release if you called selectall_* methods with a non-select statement DBD::ODBC would raise an error saying "no select statement currently executing". See RT 68720. After discussions on dbi-dev the concensus seems to be that issuing a warning in this case is better so that is what I've done. As a result t/rt_68720.t has been removed and t/85_selectall_non_select.t has been added. [DOCUMENTATION] * odbc_getdiagfield was incorrectly named odbc_getdiagrec in the pod * add DBI version required for StrictlyTyped and DiscardString to pod * Added new FAQ on why a transaction may be committed when AutoCommit is turned off. [OTHER] * Make examples\odbc_diag.pl more tolerant of drivers which do not handle diagnostic calls properly. * Make t/40UnicodeRoundTrip.t work with SQLite - Kenichi Ishigaki * Make t/odbc_describe_parameter.t work with SQLite - Kenichi Ishigaki * Add 80_odbc_diags.t based on the same file in examples 1.34_4 2012-02-05 [BUG FIXES] * When odbc_getdiag* methods were added they installed themselves into DBI but did not set IMP_KEEP_ERR so calling them cleared DBI's errors. 1.34_3 2012-02-03 [BUG FIXES] * Linking against unixODBC was working by accident on most UNIX machines and depended on the order of the files in /usr/lib (or wherever) and what files there were (e.g. an archive or a shared object). Same applied to iODBC but it was more broken especially on machines where libiodbc.so.N.N existed but there was no libiodbc.so which could lead to no adding the shared object at all. I doubt anyone really noticed this but I did eventually on Ubuntu where libiodbc.so.N.N existed but libiodbc.so did not. [ENHANCEMENTS] * Added experimental odbc_getdiagrec and odbc_getdiagrec methods, examples/odbc_diag.pl and examples/params_in_error.pl. [DOCUMENTATION] * New FAQ entries. 1.34_2 2012-01-25 [BUG FIXES] * Fixed rt73734 - debian moved where unixODBC libs are stored. * Fixed memory leak of the parameter status array introduced in previous release when execute_for_fetch used. When the statement handle is destroyed the parameter status array was not freed. [ENHANCEMENTS] * Added environment variable PERL_DBD_ODBC_PREFER_UNIXODBC as a synonym for -x from Rafael Kitover (Caelum). [DOCUMENTATION] * Add a deviation from DBI spec for type_info_all. [OTHER] * Added example execute_for_fetch.pl 1.34_1 2011-12-11 [ENHANCEMENTS] * Added experimental execute_for_fetch support and associated attributes odbc_batch_size and odbc_disable_array_operations. 1.33 2011-12-01 This is simply the official release of the 1.32 development releases. 1.32_5 2011-11-24 [ENHANCEMENTS] * Enable multiple active statement support in 70execute_array.t for drivers we recognise which support MAS. * Change column_info to support Unicode catalog/schema/table/column names. 1.32_4 2011-11-22 [BUG FIXES] * remove debugging printf which output "HERE" in some rare cases. rt 72534 - thanks John Deighan for spotting this. * The test 70execute_array.t could fail due to warning being output if the driver does not support Multiple Active Statements. [ENHANCEMENTS] * Use SQLGetTypeInfoW on unicode builds. 1.32_3 2011-11-15 [BUG FIXES] * Fix bug in utf16_copy which was not adding a trailing NUL but I'm not sure this affected anyone until I changed table_info this release. [ENHANCEMENTS] * DBD::ODBC now allows unicode catalog/schema/table parameters to be passed to table_info. Of course they will only reliably work with a supporting Unicode ODBC driver. 1.32_2 2011-10-22 [ENHANCEMENTS] * Added new odbc_driver_complete attribute allowing the ODBC Driver Manager and ODBC Driver to throw dialogues for incomplete connection strings or expired passwords etc. [OTHER] * added more examples [DOCUMENTATION] * new FAQ entries * added note saying you cannot pass unicode schema/table/column names to metadata calls like table_info/column_info currently. 1.32_1 2011-06-24 [BUG FIXES] * I omitted rt_68720.t from the 1.31 distribution which leads to a warning as it is mentioned in the MANIFEST. [OTHER] * Changed line endings in README.af and README.unicode to be unix line endings and native eol-style in subversion. * Minor changes to Makefile.PL to save the opensuse guys patching. * Added unicode_sql.pl and unicode_params.pl examples 1.31 2011-06-21 [BUG FIXES] Recently introduced test sql_type_cast.t cannot work with DBI less than 1.611. Minor change to Makefile.PL to avoid use of unitialised warning on $ENV{LD_LIBRARY_PATH} in warning when it is not set. 1.30_7 2011-06-15 [BUG FIXES] Some time ago (I don't know when) a few internal errors generated by DBD::ODBC got ignored. There are about 5 of them but I seriously doubt anyone would hit any other than the data truncated error (which is reported by the ODBC driver anyway) and "no select statement currently executing". You can see rt_68720.t in the t directory for an example of the latter. [ENHANCEMENTS] An extra argument has been added to the sub associated with odbc_err_handler. The arguments passed to the odbc_err_handler are now state (string), error (string), native error code (number) and the status returned from the last ODBC API. The status will be SQL_ERROR (-1) for errors or SQL_SUCCESS_WITH_INFO (1) for informational messages. 1.30_6 2011-06-04 [BUG FIXES] * When DBD::ODBC calls SQLExecDirect (the do method) it was not reporting informational diagnostics (SQL_SUCCESS_WITH_INFO) and not calling the error handler. Arguably, this is a change in behaviour but one I've struggled to resolve since in all other cases of warnings DBD::ODBC's error handler is called. However, DBI does not call its error handler for warnings so was DBD::ODBC wrong to call it's error in the first place for warnings? I decided it was better to leave this as it is but add checking of SQLExecDirect/do. Apart from anything else if DBD::ODBC does not call its error handler for informational diagnostics there is no way to retrieve print statements etc from procedures. * The odbc_describe_parameter.t test could fail with some versions of MS SQL Server ODBC Driver. It was down to when SQLDescribeParameter is disabled, the column_size passed to SQLBindParameter is 0. * pod example of odbc_err_handler incorrectly used \$err_handler instead of \&err_handler. 1.30_5 2011-05-24 [BUG FIXES] * The change in behavior detailed in 1.30_1 for wide character binding was still not working properly (see http://rt.cpan.org/Ticket/Display.html?id=67994). It was working for SQL_CHAR described columns but not SQL_VARCHAR. 1.30_4 2011-05-18 [BUG FIXES] * Fix issue described in http://www.nntp.perl.org/group/perl.dbi.dev/2011/05/msg6567.html. If you prepare a statement, disconnect and then try and execute the statement you get an error but it does not tell what is wrong. [ENHANCEMENTS] * Added support for StrictlyTyped and DiscardString to the bind_col method. [OTHER] * Minor changes to META.yml for mailing list, dynamic_config, homepage and keywords. * The pod was missing = before the heads on a couple of sections in "Private DBD::ODBC Functions" * TreatAsLob was incorrectly documented as BindAsLob. 1.30_3 2011-05-17 [BUG FIXES] * Made the new odbc_describe_parameters work and added test case. 1.30_2 2011-05-16 [ENHANCEMENTS] * Added the new odbc_describe_parameters attribute. 1.30_1 2011-05-12 [BUG FIXES] * Fixed some compiler warnings shown with -Wall including some printf formats that had extra/missing arguments. * Fixed t/70execute_array.t which was missing an "order by" in the check_data sub which could cause failures for drivers not returning the rows in the order they were inserted. * Minor fix to Makefile.PL to avoid issuing variable used in void context. [CHANGE IN BEHAVIOUR] * DBD::ODBC used to quietly rollback any transactions when disconnect was called and AutoCommit was off. This can mask a problem and leads to different behaviour when disconnect is called vs not calling disconnect (where you get a warning). This release issues a warning if you call disconnect and a transaction is in progress then it is rolled back. * DBD::ODBC used to bind char/varchar/longvarchar columns as SQL_CHAR meaning that in the unicode build of DBD::ODBC the bound column data would be returned 8bit in whatever character-set (codepage) the data was in, in the database. This was inconvenient and arguably a mistake. Columns like nchar/nvarchar etc were bound as SQL_WCHAR and returned as Unicode. This release changes the behaviour in a unicode build of DBD::ODBC to bind all char columns as SQL_WCHAR. This may inconvenience a few people who expected 8bit chars back, knew the char set and decoded them (sorry). See odbc_old_unicode to return to old behaviour. [ENHANCEMENTS] * added -w option to Makefile.PL to add "-Wall" to CCFLAGS and -fno-strict-aliasing so I can find warnings. * Cope with broken ODBC drivers that describe a parameter as SQL type 0. [OTHER] * Add "disconnect and transactions" to pod describing what DBD::ODBC does if you call disconnect with an outstanding transaction. * Reorganised FAQ for bound parameter issues and added a lot on bound parameter problems. * Added new FAQ entry for Firebird * Removed some unused variables and added some missing function prototypes 1.29 2011-03-08 * An official release of the 1.28 development releases. [NOTE] * The 1.28 development releases made a change which causes a generic error to be reported when an ODBC call fails but an error message is not retrieved from the ODBC Driver. It appears this has caught out a few ODBC drivers - notably freeTDS and Firebird. You now may see errors that were missed before e.g., DBIx::Class's tests for Firebird now errors test 21 "outer txn rolled back" (and others) because SQLRowCount returns an error after "ROLLBACK TO SAVEPOINT savepoint_0"; before this error was missed. 1.28_5 2011-03-06 [BUG FIXES] * rt_59621.t had wrong skip count * Fixed missing SQL_MAX_TABLE_NAME_LEN definition from test. * Fixed problem with some drivers which batch "insert;select" where SQLMoreResults is not required and an extra describe is done. * Fixed "select 1" in 02simple.t for Firebird ODBC Driver. * disconnect call added to 70execute_array.t was in the wrong place. * In non-unicode mode we bind strings as SQL_CHAR but the driver may have described them as SQL_WCHAR and we were not doing ChopBlanks processing in that case. [REQUIREMENTS] * Now needs Test::Simple 0.90. [OTHER] * Added dml_counts.pl example * worked around a problem in freeTDS in the 20SqlServer.t test provided by Ralph Doncaster. * Changed test rt_62033.t to try and make it work with freeTDS - I failed. It now skips attempts to fetch when the insert fails. * Worked around problem in Firebird ODBC driver which reports timestamps have a display size of 24 characters but then can return 29 which could lead to data truncation errors. See http://tracker.firebirdsql.org/browse/ODBC-112 * Worked around problem in Firebird ODBC driver which reports VARCHARs have a maximum length of 32765 but in fact it is 4000. See http://tracker.firebirdsql.org/browse/ODBC-111 * Improvements in tracing to take account of DBI's neatsvpv lops 5 characters off maxsize on a string. 1.28_4 2011-02-24 [BUG FIXES] * Fixed compilation problems with DBIf_TRACE_TXN * Added missing disconnect call to 70execute_array.t 1.28_3 2011-02-22 [BUG FIXES] * Fixed MANIFEST in 1.28_2 which named 2 files incorrectly. * Fixed use of PREREQ_PRINT in versions of ExtUtils::MakeMaker which don't support it. * Fixed a check on LD_LIBRARY_PATH for unixODBC which could report you've not set LD_LIBRARY_PATH correctly. [ENHANCEMENTS] * Added Perl and ExtUtils::MakeMaker version output to build process. * Added support for DBI's new trace flags ENC, CON, TXN and DBD. From DBI 1.617 you should be able to use: DBI_TRACE=DBD to ONLY get DBD::ODBC tracing without DBI tracing ENC and CON DBI flags are synonymous with DBD::ODBC's odbcconnection and odbcunicode trace flags which you can still use for now. [OTHER] * From now on I'm changing the way the Changes file is written as per article at http://blog.urth.org/2011/01/changes-file-how-and-how-not-to.html * Some broken drivers (freeTDS in this case) can return SQL_ERROR from an ODBC API function and then SQLError does not return error details. In this case set a generic error saying an error occurred but we could not retrieve it. * Added FAQ entry on MS Access and text columns limited to 255 chrs. * Added 70execute_array.t test. 1.28_2 2011-01-24 Added -x argument to Makefile.PL saying you prefer unixODBC over iODBC driver managers as a) we need to look for iODBC first on some platforms to detect iODBC and b) some platforms (Debian/Ubuntu) people have both binary packages installed but only unixODBC dev package. Patch from Rafael Kitover (Caelum) for better Cygwin handling. Minor change to data sources test to cope with someone having no data sources and using a DSN-less connection for testing. Fixed MARS test when a DSN-less connection used for testing - thanks to Rafael Kitover (Caelum) for spotting this. pod patch for "CPAN Testers Reporting" to point at cpan testers wiki from Rafael Kitover (Caelum). Fixed some broken links in the FAQ. Add a multiple active statement document link to random links and the FAQ entry. A call to SQLNumResultCols was not checked to test it succeeded. Not seen anyone run into this as yet. 1.28_1 2010-12-29 Rewrote documentation on odbc_SQL_ROWSET_SIZE and added loads of notes so I don't have to go through a huge irc conversation with ribasushi again. Workaround bug in DBI (prior to 1.616) which mistakenly issues a FETCH on any attribute passed to the connect method and sometimes driver managers error on SQL_ROWSET_SIZE in SQLGetConnectAttr. ChopBlanks was not working on UCS-2 encoded data written into bound columns and was also sometimes reading off the end of the bound array. Minor FAQ changes: Added an additional way to read MS Access dbs from Unix Clarified versions for MARS_Connection updates to cancel_big_fetch.pl Updated TO_DO with more stuff to do Improved tracing output Tidied up some of the examples 1.27 2010-12-29 Official release of the 1.26 development releases. 1.26_4 2010-12-14 Fixed bug highlighted by investigation into rt 62033 where the active flag was sometimes not set on the statement after SQLMoreResults indicates a result-set exists. Fix rt 63550 reported by John Corcoran where if a do method call fails the SQL C is not available in an error handler as we never created a DBI statement in the first place. Added a note to "do" deviations pod. Minor fix to head at wrong level in the pod. Fix a possible snprintf buffer overflow in GetTypeInfo when the type is specified and it is negative. 1.26_3 2010-11-18 Fixed rt 63108. The change to column binding in 1.24_2 was not complete and causes bound columns to be rebound on each execute wasting time and leaking memory. Found, diagnosed and proposed fix by Steve Bentley. 1.26_2 2010-11-09 Fixed bug found by frew where an snprintf can overflow when binding a lot of parameters. 1.26_1 2010-10-24 There are over 200 block changes in the source code for this release from the previous one (see below). If you are using DBD::ODBC in production you should not upgrade without testing this release first as it introduces a lot of internal changes. DBD::ODBC has now gone entirely ODBC 3 and relies on an ODBC Driver Manager to map calls to ODBC 2.0 drivers (why are you still using ODBC 2.0 drivers?). From now on DBD::ODBC needs to be linked with an ODBC Driver Manager and I recommend unixODBC on UNIX and the MS ODBC Driver Manager on Windows. There are really good reasons for this but mainly it is because an ODBC Driver Manager will map ODBC 2.0 calls to an ODBC 3.0 driver and vice versa and handle UNICODE transparently. Bumped Test::Simple requirement up to 0.90 so we can use done_testing and note. Bump Perl requirement to 5.8 as per DBI. Workaround a bug in mdbtools which fails to set the out connection string in a SQLDriverConnect call. This can lead to: Fixed panic: sv_setpvn called with negative strlen at blib/lib/DBD/ODBC.pm line 107. Added rt_61370.t for rt 61370. Removed last remaining sprintf calls and replaced with snprintf. Changed the point at which DBD::ODBC switches from VARCHAR to LONGVARCHAR or WVARCHAR to WLONGVARCHAR when SQLDesribeParam fails. It was 4000 and is now 2000 for unicode builds. Works around a daft issue in the MS SQL Server driver which will not allow 'x' x 2001 converted to wide characters to be inserted into a varchar(8000). Minor change to Makefile.PL to print out found libs for iODBC and unixODBC. Added some FAQs for problems with iODBC and a recent bug in DBI. Added FAQ on my_snprintf problem. Fixed some pod errors in FAQ document. Fixed warning on 64 bit Strawberry Perl when compiling dbdimp.c for cast from ptr to UDWORD. Moved to_do items from Changes to TO_DO. Reformatted this file to save Jens work. Changed calls to SQLTransact (ODBC 2.0) to SQLEndTran (ODBC 3.0). There really shouldn't be any ODBC 2.0 drivers still around but even if there are, the ODBC driver manager should do the mapping for us. Changed calls to SQLGetConnectOption/SQLSetConnectOption to to SQLGetConnectAttr/SQLSetConnectAttr for ODBC 3.0. Changed calls to SQLColAttributes (ODBC 2.0) to SQLColAttribute (ODBC 3.0). Bumped requirement on DBI to 1.609 because that is the first version to contain a dbipport.h which defined my_snprintf - see https://rt.cpan.org/Public/Bug/Display.html?id=62346 and http://www.nntp.perl.org/group/perl.dbi.dev/2010/10/msg6335.html Various small changes to dbdimp.c which should have no effect other than to make it leaner: Removed all dTHR occurrences from dbdimp.c as it is a NOOP since 5.8 and we need 5.8 at least. Removed dbd_param_err as it was not used Removed odbc_get_query_timeout as it was never compiled Removed eod field from statement as it was never used Removed a load of commented out code Replaced some SvPV calls with SvPV_nolen when we didn't used the length Removed some silly code from dbd_db_execdirect which attempted to return -3 - don't think it could ever get run. Minor tracing output tidy up Removed dbd_caution as it was no used Localised more variable declarations 1.25 2010-09-22 Official release of 1.25 combining all the changes in the 1.24_x development releases. 1.24_6 2010-09-16 rt 61370 - default XML type parameters in SQL Server to SQL_WCHAR so they accept unicode strings. 1.24_5 2010-09-15 Fixed missing SvSETMAGIC on a bound scalar which was causing length() to return the wrong result - see http://www.perlmonks.org/?node_id=860211 and a big thank you to Perl Monks and in particular ikegami. Changed bind_col so it actually pays attention to the TYPE attribute as you could not override the bind type of a bound column before. 1.24_4 2010-09-08 Left a sv_undef in - thanks smoke testers for finding that. Change sprintf to snprintf for safety. 1.24_3 2010-09-06 Added note from Robert Freimuth for obtaining the last insert ID in MS Access. Changed all &sv_yes/&sv_no occurrances in XS to PL_sv_yes/PL_sv_no as the originals have now gone from blead Perl. Minor change to fix missing newline in trace output. Added a FAQ entry for how "use regional settings" in MS SQL Server breaks things. 1.24_2 2010-07-23 Fix rt57957 reported by Marc Prewitt. DBD::ODBC was not ignoring named placeholders and ? inside comments. Comments are deemed as text between "/*" and "*/" (if not in a literal) and line comments begin with "--". Added a FAQ on procedures not completing in MS SQL Server. Thanks to Peter Rabbitson for hitting this problem and reminding me I'd seen it a couple of times before. Added a FAQ on equality comparisons with ntext columns. Added pod for last_insert_id which is not currently supported. Fix bug where if SQLMoreResults was called and failed it was not reported. Removed some unused fields from the fbh structure which should save a little memory for each column in a result-set. Started adding support for DBI's DiscardString and StrictlyTyped but not complete yet so don't use them yet. Added experimental odbc_lob_read method - see pod. Thanks to tye and ikegami on perlmonks for pointing out some problems with my initial implementation. Moved the binding of columns to the first call to fetch instead of after execute is called as it prevents bind_col overrriding the type used for binding and I needed it to support odbc_lob_read. This may have undesired affects so any testing of this release would be appreciated. Added bind_col method so DBD::ODBC can support attributes on a bind_col call. Removed support for DBI's blob_read - it was totally flawed and did not work at all. May replace in the future. Added support for MS SQL Server XML type (SQL type -152). See rt 59621. Added note on do method implementation in DBD::ODBC and how some may consider it to deviate from the DBI specification. 1.24_1 2010-05-27 Corrected pod and private attributes for the odbc_SQL_DRIVER_ODBC_VER attribute which was documented as SQL_DRIVER_ODBC_VER. Added FAQ on pauses on statement destruction when all the result-set has not been retrieved (mostly freeTDS and MS SQL Server ODBC Driver). Fixed bug introduced in 1.24 where if you are using MS SQL Server, and you are preparing, binding placeholders and re-executing multiple times you may get a "Invalid character value for cast specification" error. Thanks to anonymous for spotting this and producing a standalone example of the problem that made it so much easier to find. 1.24 2010-05-14 Minor change in Makefile.PL to only use NO_META if ExtUtils::MakeMaker is at least at version 6.10. Reported by Chunmei Wu. Minor change to test rt_50852 which had wrong skip count. 1.23_5 2010-05-06 Added advice from Jan Dubois (ActiveState) on building DBD::ODBC for ActivePerl (see README.windows). rt56692. Fix spelling mistake in DBD::ODBC pod - thanks to Ansgar Burchardt. Added a 7th way to help documentation - become a tester. Hopefully fixed problems building on windows 32 bit platforms that have old sql header files not mentioning SQLLEN/SQLULEN. 1.23_4 2010-04-13 Added more FAQs. Small optimization to remove calls to SQLError when tracing is not turned on. This was a bug. We only need to call SQLError when SQLExecute succeeds if there is an error handler or if tracing is enabled. The test was for tracing disabled! Large experimental change primarily affecting MS SQL Server users but it does impact on other drivers too. Firstly, for MS SQL Server users we no longer SQLFreeStmt(SQL_RESET_PARAMS) and rebind bound parameters as it is causing the MS SQL Server ODBC driver to re-prepare the SQL. Secondly (for all drivers) we no longer call SQLBindParameter again IF all the arguments to it are the same as the previous call. If you find something not working you better let me know as this is such a speed up I'm going to go with this unless anyone complains. Minor change to avoid a double call to SQLGetInfo for SQL_DBMS_NAME immediately after connection. Small change for rt 55736 (reported by Matthew Kidd) to not assume a parameter is varXXX(max) if SQLDescribeParam failed in the Microsoft Native Client driver. 1.23_3 2010-03-24 Minor changes to Makefile.PL and dbdimp.c to remove some compiler warnings. Fix some calls to SQLMoreResults which were not passing informational messages on to DBI's set_err. As you could not see all the informational messages from procedures, only the first. Fix minor issue in 02simple test which printed the Perl subversion before the version. Changes to 20SqlServer.t to fix a few typos and make table names consistent wrt to case - (as someone had turned on case-sensitivity in SQL Server) Similar changes in rt_38977.t and rt_50852.t 1.23_2 2010-01-26 Fixed bug in Makefile.PL which could fail to find unixODBC/iODBC header files but not report it as a problem. Thanks to Thomas J. Dillman and his smoker for finding this. Fixed some compiler warnings in dbdimp.c output by latest gcc wrt to format specifiers in calls to PerlIO_printf. Added the odbc_force_bind_type attribute to help sort out problems with ODBC Drivers which support SQLDescribeParam but describe the parameters incorrectly (see rt 50852). Test case also added as rt_50852.t. 1.23_1 2009-10-21 makefile.PL changes: some formatting changes to output warn if unixodbc headers are not found that the unixodbc-dev package is not installed use $arext instead of "a" pattern match for pulling libodbc.* changed warn if DBI_DSN etc not defined change odbc_config output for stderr to /dev/null missing / on /usr/local wheb finding find_dm_hdr_files() New FAQ entries from Oystein Torget for bind parameter bugs in SQL Server. rt_46597.rt - update on wrong table Copied dbivport.h from the latest DBI distribution into DBD::ODBC. Added if_you_are_taking_over_this_code.txt. Add latest Devel::PPPort ppport.h to DBD::ODBC and followed all recommendations for changes to dbdimp.c. Added change to Makefile.PL provided by Shawn Zong to make Windows/Cygwin work again. Minor change to Makefile.PL to output env vars to help in debugging peoples build failures. Added odbc_utf8_on attribute to dbh and sth handles to mark all strings coming from the database as utf8. This is for Aster (based on PostgreSQL) which returns all strings as UTF-8 encoded unicode. Thanks to Noel Burton-Krahn. 1.23 2009-09-11 Only a readme change and version bumped to 1.23. This is a full release of all the 1.22_x development releases. 1.22_3 2009-08-19 Fix skip count in rt_38977.t and typo in ok call. Workaround a bug in unixODBC 2.2.11 which can write off the end of the string buffer passed to SQLColAttributes. Fix skip count in rt_null_nvarchar.t test for non SQL Server drivers. Fix test in 02simple.t which reported a fail if you have no ODBC datasources. In 99_yaml.t pick up the yaml spec version from the meta file instead of specifying it. Change calls to SQLPrepare which passed in the string length of the SQL to use SQL_NTS because a) they are null terminated and more importantly b) unixODBC contains a bug in versions up to 2.2.16 which can overwrite the stack by 1 byte if the string length is specified and not built with iconv support and converting the SQL from ASCII to Unicode. Fixed bug in ping method reported by Lee Anne Lester where it dies if used after the connection is closed. A great deal of changes to Makefile.PL to improve the automatic detection and configuration for ODBC driver managers - especially on 64bit platforms. See rt47650 from Marten Lehmann which started it all off. Add changes from Chris Clark for detecting IngresCLI. Fix for rt 48304. If you are using a Microsoft SQL Server database and nvarchar(max) you could not insert values between 4001 and 8000 (inclusive) in size. A test was added to the existing rt_38977.t test. Thanks to Michael Thomas for spotting this. Added FAQ on UTF-8 encoding and IBM iSeries ODBC driver. Add support for not passing usernames and passwords in call to connect. Previously DBD::ODBC would set an unspecified username/password to '' in ODBC.pm before calling one of the login_xxx functions. This allows the driver to pull the username/password from elsewhere e.g., like the odbc.ini file. 1.22_1 2009-06-16 Applied a slightly modified version of patch from Jens Rehsack to improve support for finding the iODBC driver manager. A UNICODE enabled DBD::ODBC (the default on Windows) did not handle UNICODE usernames and passwords in the connect call properly. Updated "Attribution" in ODBC.pm. Unicode support is no longer experimental hence warning and prompt removed from the Makefile.PL. old_ping method removed. Fixed bug in 02simple.t test which is supposed to check you have at least one data source defined. Unfortunately, it was checking you had more than 1 data source defined. rt_null_varchar had wrong skip count meaning non-sql-server drivers or sql server drivers too old skipped 2 tests more than were planned. 1.22 2009-06-10 Fixed bug which led to "Use of uninitialized value in subroutine entry" warnings when writing a NULL into a NVARCHAR with a unicode-enabled DBD::ODBC. Thanks to Jirka Novak and Pavel Richter who found, reported and patched a fix. Fixed serious bug in unicode_helper.c for utf16_len which I'm ashamed to say was using an unsigned short to return the length. This meant you could never have UTF16 strings of more than ~64K without risking serious problems. The DBD::ODBC test code actually got a *** glibc detected *** /usr/bin/perl: double free or corruption (out): 0x406dd008 *** If you use a UNICODE enabled DBD::ODBC (the default on Windows) and unicode strings larger than 64K you should definitely upgrade now. 1.21_1 2009-06-02 Fixed bug referred to in rt 46597 reported by taioba and identified by Tim Bunce. In Calls to bind_param for a given statement handle if you specify a SQL type to bind as, this should be "sticky" for that parameter. That means if you do: $sth->bind_param(1, $param, DBI::SQL_LONGVARCHAR) and follow it up with execute calls that also specify the parameter: $sth->execute("a param"); then the parameter should stick with the SQL_LONGVARCHAR type and not revert to the default parameter type. The DBI docs (from 1.609) make it clear the parameter type is sticky for the duration of the statement but some DBDs allow the parameter to be rebound with a different type - DBD::ODBC is one of those drivers. 1.21 2009-04-27 Change 02simple test to output Perl, DBI and DBD::ODBC versions. Fixed bug where if ODBC driver supports SQLDescribeParam and it succeeds for a parameterised query but you override the parameter type, DBD::ODBC was still using the size returned by SQLDescribeParam. Thanks to Brian Becker for finding, diagnosing and fixing this issue. Added FAQ entry about SQL Server and calling procedures with named parameters out of order. Added test_results.txt containing some supplied make test results. 1.20 2009-04-20 Fix bug in handling of SQL_WLONGVARCHAR when not built with unicode support. The column was not identified as a long column and hence the size of the column was not restricted to LongReadLen. Can cause DBD::ODBC to attempt to allocate a huge amount of memory. Minor changes to Makefile.PL to help diagnose how it decided which driver manager to use and where it was found. Offer suggestion to debian-based systems when some of unixODBC is found (the bin part) but the development part is missing. In 20SqlServer.t attempt to drop any procedures we created if they still exist at the end of the test. Reported by Michael Higgins. In 12blob.t separate code to delete test table into sub and call at being and end, handle failures from prepare there were two ENDs. In ODBCTEST.pm when no acceptable test column type is found output all the found types and BAIL_OUT the entire test. Skip rt_39841.t unless actually using the SQL Server ODBC driver or native client. Handle drivers which return 0 for SQL_MAX_COLUMN_NAME_LEN. Double the buffer size used for column names if built with unicode. 1.19 2009-04-02 Some minor diagnostic output during tests when running against freeTDS to show we know of issues in freeTDS. Fixed issue in 20SqlServer.t where the connection string got set with two consecutive semi-colons. Most drivers don't mind this but freeTDS ignores everything after that point in the connection string. Quieten some delete table output during tests. Handle connect failures in 20SqlServer.t in the multiple active statement tests. In 02simple.t cope with ODBC drivers or databases that do not need a username or password (MS Access). In 20SqlServer.t fix skip count and an erroneous assignment for driver_name. Change some if tests to Test::More->is tests in 02simple.t. Fix "invalid precision" error during tests with the new ACEODBC.DLL MS Access driver. Same workaround applied for the old MS Access driver (ODBCJT32.DLL) some time ago. Fix out of memory error during tests against the new MS Access driver (ACEODBC.DLL). The problem appears to be that the new Access driver reports ridiculously large parameter sizes for "select ?" queries and there are some of these in the unicode round trip test. Fixed minor typo in Makefile.PL - diagnostic message mentioned "ODBC HOME" instead of ODBCHOME. 12blob.t test somehow got lost from MANIFEST - replaced. Also changed algorithm to get a long char type column as some MS Access drivers only show SQL_WLONGVARCHAR type in unicode. Added diagnostic output to 02simple.t to show the state of odbc_has_unicode. 1.18_4 2009-03-13 A mistake in the MANIFEST lead to the rt_43384.t test being omitted. Brian Becker reported the tables PERL_DBD_39897 and PERL_DBD_TEST are left behind after testing. I've fixed the former but not the latter yet. Yet another variation on the changes for rt 43384. If the parameter is bound specifically as SQL_VARCHAR, you got invalid precision error. Thanks to Øystein Torget for finding this and helping me verify the fix. If you attempt to insert large amounts of data into MS Access (which does not have SQLDescribeParam) you can get an invalid precision error which can be worked around by setting the bind type to SQL_LONGVARCHAR. This version does that for you. 08bind2.t had a wrong skip count. 12blob.t had strict commented out and GetTypeInfo was not quoted. Also introduced a skip if the execute fails as it just leads to more obvious failures. In dbdimp.c/rebind_ph there was a specific workaround for SQL Server which was not done after testing if we are using SQL Server - this was breaking tests to MS Access. 1.18_2 2009-03-09 Added yet another workaround for the SQL Server Native Client driver version 2007.100.1600.22 and 2005.90.1399.00 (driver version 09.00.1399) which leads to HY104, "Invalid precision value" in the rt_39841.t test. 1.18_1 2009-03-06 Fixed bug reported by Toni Salomäki leading to a describe failed error when calling procedures with no results. Test cases added to 20SqlServer.t. Fixed bug rt 43384 reported by Øystein Torget where you cannot insert more than 127 characters into a Microsoft Access text(255) column when DBD::ODBC is built in unicode mode. 1.18 2009-01-16 Major release of all the 1.17 development releases below. 1.17_3 2008-12-19 Reinstated the answer in the FAQ for "Why do I get invalid value for cast specification" which had got lost - thanks to EvanCarroll in rt41663. rt 41713. Applied patch from JHF Remmelzwaal to handle ODBC drivers which do not support SQL_COLUMN_DISPLAY_SIZE and SQL_COLUMN_LENGTH attributes in the SQLColAttributes calls after SQLTables and SQLColumns. Specifically, the driver he was using was the "Infor Integration ODBC driver". Added notes from JHF Remmelzwaal on resolving some problems he came across building DBD::ODBC on Windows with Visual Studio 6.0 and SDK Feb 2003. New odbc_column_display_size attribute for when drivers does not return a display size. Loads of tracing changes to make it easier for me to debug problems. Fixed bug in tracing of dbd_execute when parameter is char but undef which was leading to an access violation on Windows when tracing enabled. Minor changes to diagnostic output in some rt tests. One of the rt tests was not skipping the correct number of tests if the driver was not SQL Server. 1.17_2 2008-11-17 Changed ParamTypes attribute to be as specification i.e., { parameter_1 => {TYPE => sql_type} parameter_2 => {TYPE => sql_type} ... } and changed the tests in 07bind.t to reflect this. A few minor perlcritic changes to ODBC.pm. Added 99_yaml.t test to check META.yml. Added patch from Spicy Jack to workaround problems with Strawberry Perl setting INC on the command line when running Makefile.PL. 1.17_1 2008-10-10 Missing newline from end of META.yml upsets cpan Add code to Makefile.PL to spot command line containing INC, outline problem and resolution and not generate Makefile to avoid cpan-testers failures. Loads of pod formatting changes including a section in the wrong place New kwalitee test Fix rt 39841. Bug in SQL Server ODBC driver which describes parameters by rearranging your SQL to do a select on the columns matching the parameters. Sometimes it gets this wrong and ends up describing the wrong column. This can lead to a varchar(10) being described with a column-size less than 10 and hence you get data truncation on execute. Added a test case for rt 39841. Fix rt 39897. 1.17 added support for varchar(max) in SQL Server but it broke support for SQL_VARCHAR columns in that they had LongReadLen and LongTruncOk applied to them. This means that in 1.16 you could retrieve a SQL_VARCHAR column without worrying about how long it was but in 1.17 if the same column was greater than 80 characters then you would get a truncated error. The only way the around this was to set LongTruncOk or LongReadLen. Added a test case for rt 39897. 1.17 2008-09-22 In the absence of any bug reports since 1.16_4 this is the official 1.17 release. See below for changes since 1.16. Minor pod changes. Added support for ParamTypes (see DBI spec) and notes in DBD::ODBC pod. 1.16_4 2008-09-12 Small change to Makefile.PL to work around problem in darwin 8 with iODBC which leads to "Symbol not found: _SQLGetPrivateProfileString" errors. Added new [n]varXXX(max) column type tests to 20SqlServer.t. Fixed support for SQL_WCHAR and SQL_WVARCHAR support in non-unicode build. These types had ended up only being included for unicode builds. More changes to ODBC pod to 1) encourage people to use CPAN::Reporter, 2) rework contributing section, 3) mention DBIx::Log4perl 4) add a BUGS section 5) add a "ODBC Support in ODBC Drivers" section etc. Changed default fallback parameter bind type to SQL_WVARCHAR for unicode builds. This affects ODBC drivers which don't have SQLDescribeParam. Problem reported by Vasili Galka with MS Access when reading unicode data from one table and inserting it into another table. The read data was unicode but it was inserted as SQL_CHARs because SQLDescribeParam does not exist in MS Access so we fallback to either a default bind type (which was SQL_VARCHAR) or whatever was specified in the bind_param call. Fixed bug in 20SqlServer.t when DBI_DSN is defined including "DSN=". 1.16_3 2008-09-03 Changed Makefile.PL to add "-framework CoreFoundation" to linker line on OSX/darwin. Disallow building with iODBC if it is a unicode build. More tracing for odbcconnect flag. Fix bug in out connection string handling that attempted to use an out connection string when SQLDriverConnect[W] fails. Fixed yet more test count problems due to Test::NoWarnings not being installed. Skip private_attribute_info tests if DBI < 1.54 About a 30% rewrite of bound parameter code which started with an attempt to support the new VARBINARY(MAX) and VARCHAR(MAX) columns in SQL Server when the parameter length is > 400K in size (see elsewhere in this Changelog). This is a seriously big change to DBD::ODBC to attempt to be a bit more clever in its handling of drivers which either do not support SQLDescribeParam or do support SQLDescribeParam but cannot describe all parameters e.g., MS SQL Server ODBC driver cannot describe "select ?, LEN(?)". If you specify the bound parameter type in your calls to bind_param and run them to an ODBC driver which supports SQLDescribeParam you may want to check carefully and probably remove the parameter type from the bind_param method call. Added rt_38977.t test to test suite to test varchar(max) and varbinary(max) columns in SQL Server. Moved most of README.unicode to ODBC.pm pod. Added workaround for problem with the Microsoft SQL Server driver when attempting to insert more than 400K into a varbinary(max) or varchar(max) column. Thanks to Julian Lishev for finding the problem and identifying 2 possible solutions. 1.16_2 2008-09-02 Removed szDummyBuffer field from imp_fbh_st and code in dbd_describe which clears it. It was never used so this was a waste of time. Changed the remaining calls to SQLAllocEnv, SQLAllocConnect and SQLAllocStmt and their respective free calls to the ODBC 3.0 SQLAllocHandle and SQLFreeHandle equivalents. Rewrote ColAttributes code to understand string and numeric attributes rather than trying to guess by what the driver returns. If you see any change in behaviour in ColAttributes calls you'll have to let me know as there were a number of undocumented workarounds for drivers. Unicode build of DBD::ODBC now supports: column names The retrieval of unicode column names SQL strings Unicode in prepare strings (but not unicode parameter names) e.g., select unicode_column from unicode_table is fine but select * from table where column = :unicode_param_name is not so stick to ascii parameter names if you use named parameters. Unicode SQL strings passed to the do method are supported. SQL strings passed to DBD::ODBC when the odbc_exec_direct attribute is set will not be passed as unicode strings - this is a limitation of the odbc_exec_direct attribute. connection strings True unicode connection string support will require a new version of DBI (post 1.607). Note that even though unicode connection strings are not supported currently DBD::ODBC has had to be changed to call SQLDriverConnectW/SQLConnectW to indicate to the driver manager it's intention to use some of the ODBC wide APIs. This only affects DBD::ODBC when built for unicode. odbcunicode trace flag There is a new odbcunicode trace flag to enable unicode-specific tracing. Skipped 40Unicode.t test if the ODBC driver is Oracle's ODBC as I cannot make it work. Changes internally to use sv_utf8_decode (where defined) instead of setting utf8 flag. Fix problems in the test when Test::NoWarnings is not installed. Removed some unused variables that were leading to compiler warnings. Changed a lot of tracing to use new odbcconnection flag Changed to use dbd_db_login6_sv if DBI supports it. Commented out a diag in 20SqlServer.t that was leading to confusion. Added diag to 20SqlServer.t in mars test to explain why it may fail. Various pod changes for clarification and to note odbc_err_handler is deprecated. Removed odbcdev trace flag - it was not really used. New odbc_out_connect_string attribute for connections which returns the ODBC driver out connection string. 1.16_1 2008-08-28 Fixed bug in odbc_cancel which was checking the ACTIVE flag was on before calling SQLCancel. Non-select statements can also be cancelled so this was wrong. Thanks to Dean Arnold for spotting. Minor changes to test 01base to attempt to catch install_driver failing, report it as a fail and skip other tests. Fixed bug reported by James K. Lowden with asynchronous mode and SQLParamData where the code was not expecting SQL_STILL_EXECUTING and did not handle it Added odbc_putdata_start attribute to determine when to start using SQLPutData on lobs. Fixed bug in lob inserts where decimal_digits was being set to the size of the bound lob unnecessarily. Minor change to connect/login code to delete driver-specific attributes passed to connect so they do not have to be processed again when DBI calls STORE with them. New 12blob.t test. A lot of code tidy up but not expecting any real benefit or detriment when using DBD::ODBC. Fixed retrieving [n]varchar(max) columns which were only returning 1 byte - thanks to Fumiaki Yoshimatsu and perl monks for finding it. See http://markmail.org/message/fiym5r7q22oqlzsf#query:Fumiaki Yoshimatsu odbc+page:1+mid:fiym5r7q22oqlzsf+state:results Various minor changes to get the CPANTS kwalitee score up. fixed pod issues in FAQ.pm moved mytest dir to examples added generated_by and requires perl version to META.yml added pod and pod-coverage tests removed executable flag from Makefile.PL added use warnings to some modules and tests fixed pod errors in ODBC.pm added AUTHOR and LICENSE section to ODBC.pm added Test::NoWarnings to tests Added support for setting the new(ish) DBI ReadOnly attribute on a connection. See notes in pod. Changes to test suite to work around problems in Oracle's instant client 11r1 ODBC driver for Linux (SQLColAttributes problems - see 02simple.t). New tests in 30Oracle.t for oracle procedures. 1.16 2008-05-13 [TESTS] Small change to the last test in 10handler.t to cope with the prepare failing instead of the execute failing - spotted by Andrei Kovalevski with the ODBCng Postgres driver. Changed the 20SqlServer.t test to specifically disable MARS for the test to check multiple active statements and added a new test to check that when MARS_Connection is enabled multiple active statements are allowed. Changed the 09multi.t test to use ; as a SQL statement seperator instead of a newline. A few minor "use of unitialised" fixes in tests when a test fails. In 02simple.t Output DBMS_NAME/VER, DRIVER_NAME/VER as useful debugging aid when cpan testers report a fail. 2 new tests for odbc_query_timeout added to 03dbatt.t. Changed 02simple.t test which did not work for Oracle due to a "select 1" in the test. Test changed to do "select 1 from dual" for Oracle. New tests for numbered and named placeholders. [DOCUMENTATION] Added references to DBD::ODBC ohloh listing and markmail archives. Added Tracing sections. Added "Deviations from the DBI specification" section. Moved the FAQ entries from ODBC.pm to new FAQ document. You can view the FAQ with perldoc DBD::ODBC::FAQ. Added provisional README.windows document. Rewrote pod for odbc_query_timeout. Added a README.osx. [INTERNAL CHANGES] More tracing in dbdimp.c for named parameters. #ifdeffed out odbc_get_primary_keys in dbdimp.c as it is no longer used. $h->func($catalog, $schema, $table, 'GetPrimaryKeys') ends up in dbdimp.c/dbd_st_primary_keys now. Reformatted dbdimp.c to avoid going over 80 columns. Tracing changed. Levels reviewed and changed in many cases avoiding levels 1 and 2 which are reserved for DBI. Now using DBIc_TRACE macro internally. Also tracing SQL when 'SQL' flag set. [BUILD CHANGES] Changes to Makefile.PL to fix a newly introduced bug with 'tr', remove easysoft OOB detection and to try and use odbc_config and odbcinst if we find them to aid automatic configuration. This latter change also adds "odbc_config --cflags" to the CC line when building DBD::ODBC. Avoid warning when testing ExtUtils::MakeMaker version and it is a test release with an underscore in the version. [ENHANCEMENTS] Added support for parse_trace_flag and parse_trace_flags methods and defined a DBD::ODBC private flag 'odbcdev' as a test case. Add support for the 'SQL' trace type. Added private trace type odbcdev as an experimental start. Change odbc_query_timeout attribute handling so if it is set to 0 after having set it to a non-zero value the default of no time out is restored. Added support for DBI's statistics_info method. [BUG FIXES] Fix bug in support for named placeholders leading to error "Can't rebind placeholder" when there is more than one named placeholder. Guard against scripts attempting to use a named placeholder more than once in a single SQL statement. If you called some methods after disconnecting (e.g., prepare/do and any of the DBD::ODBC specific methods via "func") then no error was generated. Fixed issue with use of true/false as fields names in structure on MAC OS X 10.5 (Leopard) thanks to Hayden Stainsby. Remove tracing of bound wide characters as it relies on null-terminated strings that don't exist. Fix issue causing a problem with repeatedly executing a stored procedure which returns no result-set. SQLMoreResults was only called on the first execute and some drivers (SQL Server) insist a procedure is not finished until SQLMoreResults returns SQL_NO_DATA. 1.15 2008-01-29 1.15 final release. Fixed bug reported by Toni Salomaki where DBD::ODBC may call SQLNumResultCols after SQLMoreResults returns SQL_NO_DATA. It led to the error: Describe failed during DBI::st=HASH(0x19c2048)->FETCH(NUM_OF_FIELDS,0) when NUM_OF_FIELDS was referenced in the Perl script. Updated odbc_exec_direct documentation to describe its requirement when creating temporary objects in SQL Server. Added FAQ on SQL Server temporary tables. Fixed bug in dbdimp.c which was using SQL_WCHAR without testing it was defined - thanks Jergen Dutch. Fixed use of "our" in UCHelp.pm which fails on older Perls. Minor changes to 02simple.t and 03dbatt.t to fix diagnostics output and help debug DBD which does not handle long data properly. Further changes to Makefile.PL to avoid change in behaviour of ExtUtils::MakeMaker wrt order of execution of PREREQ_PM and CONFIGURE. Now if DBI::DBD is not installed we just warn and exit 0 to avoid a cpan-testers failure. 1.15_2 2007-11-14 Fix bug in DBD::ODBC's private function data_sources which was returning data sources prefixed with "DBI:ODBC" instead of "dbi:ODBC". If you don't have at least DBI 1.21 it is now a fatal error instead of just a warning. DBI->connect changed so informational diagnostics like "Changed database context to 'master'" from SQL Server are available in errstr/state. These don't cause DBI->connect to die but you can test $h->err eq "" after connect and obtain the informational diagnostics from errstr/state if you want them. Fixed problem in 41Unicode.t where utf8 was used before testing we had a recent enough Perl - thank you cpan testers. Changed "our" back to "my" in Makefile.PL - thank you cpan testers. Removed all calls to DBIh_EVENT2 in dbdimp.c as it is no longer used (see posts on dbi-dev). Changed text output when a driver manager is not found to stop referring to iodbcsrc which is no longer included with DBD::ODBC. Changed Makefile.PL to attempt to find unixODBC if -o or ODBCHOME not specified. Updated META.yml based on new 1.2 spec. Changed Makefile.PL so if an ODBC driver manager is not found then we issue warning and exit cleanly but not generating a Makefile. This should stop cpan-testers from flagging a fail because they haven't got an ODBC driver manager. Changed Makefile.PL so it no longer "use"s DBI/DBI::DBD because this makes cpan-testers log a fail if DBI is not installed. Changed to put the DBI::DBD use in the CONFIGURE sub so PREREQ_PM will filter out machines where DBI is not installed. Fix a possible typo, used once in 10handler.t. 1.15_1 2007-11-06 Minor changes to 20SqlServer.t test for SQL Server 2008 (Katmai). Timestamps now return an extra 4 digits of precision (all 0000) and the driver reported in dbcc messages has a '.' in the version which was not handled. New FAQ entry and test code for "Datetime field overflow" problem in Oracle. Changed all ODBC code to use new SQLLEN/SQLULEN types where Microsoft's headers indicate, principally so DBD::ODBC builds and works on win64. NOTE: you will need an ODBC Driver Manager on UNIX which knows SQLLEN/SQLULEN types. The unixODBC driver manager uses SQLLEN/SQLULEN in versions from at least 2.2.12. Thanks to Nelson Oliveira for finding, patching and testing this and then fixing problems with bound parameters on 64 bit Windows. Added private_attribute_info method DBI introduced (see DBI docs) and test cases to 02simple.t. Fairly major changes to dbd_describe in dbdimp.c to reduce ODBC calls by 1 SQLDescribeCol call per column when describing result sets. Instead of calculating the amount of memory required to hold every column name we work on the basis that (num_columns + 1) * SQL_MAX_COLUMN_NAME_LEN can hold all column names. However, to avoid using a large amount of memory unnecessarily if an ODBC driver supports massive column name lengths the maximum size per column is restricted to 256. Changed to avoid using explicit use of DBIc_ERRXXX in favour of newish (ok, DBD::ODBC is a bit behind the times in this respect) DBIh_SET_ERR_CHAR. This involved a reworking or the error handling and although all test cases still pass I cannot guarantee it has no other effects - please let me know if you spot differences in error messages. Fixed bug in 20SqlServer test for multiple results that was passing but for the wrong reason (namely, that the odbc_err_handler was being called when it should not have been). Fixed bug in odbc_err_handler that prevented it from being reset so you don't have an error handler. Looks like the problem was in dbd_db_STORE_attrib where "if(valuesv == &PL_sv_undef)" was used to detect undef and I think it should be "if (!SvOK(valuesv))". Improvements to odbc_err_handler documentation. Added 10handler.t test cases. More tests in 02simple.t to check NUM_OF_FIELDS and NAMES_uc. Bit of a tidy up: Removed some unused variable declarations from dbdimp.c. Lots of changes to DBD::ODBC tracing, particularly in dbd_describe, and dbd_error2 and login6. Removed a lot of tracing code in comments or #if 0 as it never gets built. Changed dual tests on SQL_SUCCESS and SQL_SUCCESS_WITH_INFO to use SQL_SUCCEEDED. 1.14 2007-07-17 Fix bug reported where ping crashes after disconnect thanks to Steffen Goeldner. Fix bug in dbd_bind_ph which leads to the error Can't change param 1 maxlen (51->50) after first bind in the 20SqlServer test. This is caused by svGROW in Perl 5.8.8 being changed to possibly grow by more than you asked (e.g. up to the next longword boundary). Fix problem with binding undef as an output parameter. Reported by Stephen More with IBM's ODBC driver for iSeries. Removed comment delimiters in comments in dbdimp.h leading to warnings. Removed some unused variable declarations leading to warnings. Removed PerlIO_flush calls as it is believed they are not required. Add logging for whether SQLDescribeParam is supported. Fixed use of unitialised variable in dbd_bind_ph where an undef is bound and tracing is enabled. Fixed issue with TRACESTATUS change in 20SqlServer.t tests 28, 31, 32 and 33 leading to those tests failing when testing with SQL Server 2005 or Express. Many compiler warnings fixed - especially for incompatible types. Add provisional Unicode support - thanks to Alexander Foken. This change is very experimental (especially on UNIX). Please see ODBC.pm documentation. Also see README.unicode and README.af. New database attribute odbc_has_unicode to test if DBD::ODBC was built with UNICODE support. New tests for Unicode. New requirement for Perl 5.8.1 if Unicode support required. New -[no]u argument to Makefile.PL. New warning in Makefile.PL if Unicode support built for UNIX. Fix use of unitialised var in Makefile.PL. Fix use of scalar with no effect on Makefile.PL Added warning to Makefile.PL about building/running with LANG using UTF8. Added warning to Makefile.PL about using thread-safe ODBC drivers. Updated MANIFEST to include more test code from mytest and remove MANIFEST.SKIP etc. Removed calls to get ODBC errors when SQLMoreResults returns SQL_NO_DATA. These are a waste of time since SQL_NO_DATA is expected and there is no error diagnostic to retrieve. Changes to test 17 of 02simple.t which got "not ok 17 - Col count matches correct col count" errors with some Postgres ODBC drivers. Caused by test expecting column names to come back uppercase. Fixes by uppercasing returned column names. Changes to tests in 03batt.t which correctly expects an ODBC 3 driver to return the column names in SQLTables result-set as per ODBC 3.0 spec. Postgres which reports itself as an ODBC 3.0 driver seems to return the ODBC 2 defined column names. Changed tests to catch ODBC 2.0 names are pass test put issue warning. For postgres skip test (with warning) checking $sth->{NAME} returns empty listafter execute on update Updated FAQ, added a few more questions etc. DBD::ODBC requires at least 5.6.0 of Perl. Many updates to pod documentation. Removed some dead HTTP links in the pod I could not find equivalents for - let me know if you have working replacements for ones removed Add some HTTP links to useful tutorials on DBD::ODBC 1.13 2004-11-08 Fix inconsistency/bug with odbc_exec_direct vs. odbc_execdirect settings. Now made consistent with odbc_exec_direct. For now, will still look for odbc_execdirect in prepare, but not as DBH attribute as a backup (which is what it was doing), but that support will be dropped at some time in the future. Please use odbc_exec_direct from now on... Fix handling of print statements for SQL Server thanks to Martin Evans! Thanks for all your work on this! Due to bug in SQL Server, you must use odbc_exec_direct. See t/20SqlServer.t for example. You will need to call $sth->{odbc_more_results} to clear out any trailing messages. Change tests to use Test::More. Whew, that's much nicer! Fix Oracle integral/numeric output params so that warning not printed about value not being numeric (even though it is!) 1.12 2004-10-26 Fix bug with odbc_execdirect attributed thanks to Martin Evans Fix bug(s) with odbc_query_timeout and tested with SQL*Server. Oracle tests failed with setting timeout. Probably not handled by Oracle's ODBC driver 1.11 2004-10-11 Added odbc_timeout, but untested 1.10 2004-09-08 Fixed bug in Makefile.PL. Added pod.t test, taken from DBI. Fixed various small POD issues, discovered during the pod test. Fixed bug in bind_param_inout 1.09 2004-03-10 Duh. I forgot to add new dbivport.h to MANIFEST and SVN before submitting. Fixed. 1.08 2004-03-06 Added check in Makefile.PL to detect if the environment variable LANG is Set. If so, prints a warning about potential makefile generation issues. Change to use dbivport.h per new DBI spec. Add ability to set the cursor type during the connect. This may allow some servers which do not support multiple concurrent statements to permit them -- tested with SQL Server. Thanks to Martin Busik! See odbc_cursortype information in the ODBC POD. 1.07 2004-02-19 Added to Subversion version control hosted by perl.org. Thanks Robert! See ODBC.pm POD for more information. Added contributing section to ODBC.pm POD -- see more details there! Added parameter to odbc_errhandler for the NativeError -- thanks to Martin Busik. Fix for Makefile.PL not having tab in front of $(NOOP) (Finally). Fix for SQLForeignKeys thanks to Kevin Shepherd. 1.06 2003-06-19 Fixed test in t/02simple.t to skip if the DSN defined by the user has DSN= in it. Added tests for wrong DSN, ensuring the DBI::errstr is appropriately set. Fixed small issue in Makefile.PL for Unix systems thanks to H.Merijn Brand. Update to NOT copy user id and password to connect string if UID or PWD parameter in connect string. Updated Makefile.PL for dmake, per patch by Steffen Goldner. Thanks Steffen! 1.05 2003-03-14 Cleaned up Makefile.PL and added Informix support thanks to Jonathan Leffler (see README.informix) Added nicer error message when attempting to do anything while the database is disconnected. Fixed fetchrow_hashref('NAME_uc | NAME_lc') with odbc_more_results. Added exporter to allow perl -MDBD::ODBC=9999 command line to determine version Fixed for building with DBI 1.33 and greater Removed all C++ style comments Ensured files are in Unix format, with the exception of the README type information and Makefile.PL 1.04 2003-01-24 It seems that case insensitive string comparison with a limit causes problems for multiple platforms. strncmpi, strncasecmp, _strcmpin are all functions hit and it seems to be a hit-or-miss. Hence, I rewrote it to upper case the string then do strncmp, which should be safe...sheesh. A simple thing turned into a headache... 1.03 2003-01-17 Add automatic detection of DRIVER= or DSN= to add user id and password to connect string. 1.02 2003-01-06 Fix to call finish() automatically if execute is re-called in a loop (and test in t/02simple.t to ensure it's fixed) Augmented error message when longs are truncated to help users determine where to look for help. Fixes for build under Win32 with Perl5.8. 1.01 2002-12-09 Forgot to fix require DBI 1.201 in ODBC.pm to work for perl 5.8. Fixed 1.00 2002-12-08 (Please see all changes since version 0.43) Updated Makefile.PL to handle SQL_Wxxx types correctly with unixODBC and linking directly with EasySoft OOB. Note that I could not find where iODBC defines SQL_WLONG_VARCHAR, so I'm not sure it's fixed on all other platforms. Should not have been a problem under Win32... Found that the fix in _18 was only enabled if debug enabled and it broke something else. removed the fix. Updated Makefile.PL to use DBI version 1.21 instead of 1.201 to facilitate builds under latest development versions of Perl. Updated code to use the *greater* of the column display size and the column length for allocating column buffers. This *should* workaround a problem with DBD::ODBC and the Universe database. Added code thanks to Michael Riber to handle SQLExecDirect instead of SQLPrepare. There are two ways to get this: $dbh->prepare($sql, { odbc_execdirect => 1}); and $dbh->{odbc_execdirect} = 1; When $dbh->prepare() is called with the attribute "ExecDirect" set to a non-zero value dbd_st_prepare do NOT call SQLPrepare, but set the sth flag odbc_exec_direct to 1. Fixed numeric value binding when binding non-integral values. Now lets the driver or the database handle the conversion. Fixed makefile.pl generation of makefile to force the ODBC directory first in the include list to help those installing ODBC driver managers on systems which already have ODBC drivers in their standard include path. 0.45_18 2002-09-26 Updated MANIFEST to include more of the mytest/* files (examples, tests) Fixed problem when attempting to get NUM_OF_FIELDS after execute returns no rows/columns. 0.45_17 2002-08-26 More fixes for multiple result sets. Needed to clear the DBIc_FIELDS_AV when re-executing the multiple-result set stored procedure/query. 0.45_16 2002-08-26 Updated to fix output parameters with multiple result sets. The output parameters are not set until the last result set has been retrieved. 0.45_15 2002-08-20 Updated for new DBIc_STATE macros (all debug, as it turned out) to be thread safer in the long run Updated for the new DBIc_LOGFP macros Added CLONE method Fix for SQL Server where multiple result sets being returned from a stored proc, where one of the result sets was empty (insert/update). Added new attribute odbc_force_rebind, which forces DBD::ODBC to check recheck for new result sets every execute. This is only really necessary if you have a stored procedure which returns different result sets with each execute, given the same "prepare". Many times this will be automatically set by DBD::ODBC, however, if there is only one result set in the stored proc, but it can differ with each call, then DBD::ODBC will not know to set it. Updated the DBD::ODBC POD documentation to document DBD::ODBC private attributes and usage. 0.45_14 2002-08-13 Added support to handle (better) DBI begin_work(). Fix for binding undef parameters on SQL Server. Fix bug when connecting twice in the same script. Trying to set the environment ODBC version twice against the same henv caused an error. 0.45_13 2002-08-09 Workaround problem with iODBC where SQLAllocHandleStd is not present in iODBC. Made Changes file accessible via perldoc DBD::ODBC::Changes. In the near future the change log will be removed from here and put in changes to tidy up a bit. 0.45_12 2002-08-09 Fixed global destruction access violation (which was seemingly random). 0.45_11 2002-08-08 Updated manifest to include more samples. Working on checking for leaks on Linux, where I might get more information about the process memory. Working on fixing problems with MS SQL Server binding parameters. It seems that SQLServer gets "confused" if you bind a NULL first. In "older" (SQLServer 2000 initial release) versions of the driver, it would truncate char fields. In "newer" versions of the SQL Server driver, it seems to only truncate dates (actually, round them to the nearest minute). If you have problems in the SQL Server tests, please upgrade your driver to the latest version on Microsoft's website (MDAC 2.7 or above) http://www.microsoft.com/data 0.45_10 2002-07-30 Added database specific tests to ensure things are working. Some of the tests may not work for all people or may not be desirable. I have tried to keep them as safe as possible, but if they don't work, please let me know. Added support for the internal function GetFunctions to handle ODBC 3's SQL_API_ODBC3_ALL_FUNCTIONS. Would have caused a memory overwrite on the stack if it was called. 0.45_9 2002-07-30 Fixed bug in procedure handling for SQLServer. Was not re-describing the result sets if the SQLMoreResults in the execute needs to be called. 0.45_8 2002-07-25 Fixed bug in tracing code when binding an undef parameter which did not happen to have a valid buffer with tracing level >= 2 Fixed bug when binding undef after a valid data bind on a timestamp. The Scale value was being calculated based upon the string that had been bound prior to the bind of the undef and if that had a sub-second value, then the scale would be set to the wrong value...I.e. bind_param(1, '2000-05-17 00:01:00.250', SQL_TYPE_TIMESTAMP) then execute bind_param(1, undef, SQL_TYPE_TIMESTAMP) then Fixed SQL Server issue when binding a null and the length was set to 0 instead of 1 0.45_7 2002-07-25 Adding support for array binding, but not finished. Fixed bug where SqlServer Stored procedures which perform INSERT would not correctly return a result set. Thanks to Joe Tebelskis for finding it and Martin Evans for supplying a fix. Fixed bug where binding the empty string would cuase a problem. Fixed and added test in t/07bind.t. 0.45_6 2002-07-24 Added support for new DBI ParamValues feature. 0.45_5 2002-07-23 Added odbc_err_handler and odbc_async_exec thanks to patches by David L. Good. See example in mytest/testerrhandler.pl Here's the notes about it: I've implemented two separate functions. The first is an "error handler" similar to that in DBD::Sybase. The error handler can be used to intercept error and status messages from the server. It is the only way (at least currently) that you can retrieve non-error status messages when execution is successful. To use the error handler, set the "odbc_err_handler" attribute on your database handle to a reference to a subroutine that will act as the error handler. This subroutine will be passed two args, the SQLSTATE and the error message. If the subroutine returns 0, the error message will be otherwise ignored. If it returns non-zero, the error message will be processed normally. The second function implemented is asynchronous execution. It's only useful for retrieving server messages with an error handler during an execute() that takes a long time (such as a DBCC on a large database) ODBC doesn't have the concept of a callback routine like Sybase's DBlib/CTlib does, so asynchronous execution is needed to be able to get the server messages before the SQL statement is done processing. To use asynchronous execution, set the "odbc_async_exec" attribute on your database handle to 1. Not all ODBC drivers support asynchronous execution. To see if yours does, set odbc_async_exec to 1 and then check it's value. If the value is 1, your ODBC driver can do asynchronous execution. If the value is 0, your ODBC driver cannot. 0.45_4 2002-07-22 More fixes for DB2 tests and timestamp handling. 0.45_3 2002-07-22 Changes to internal timestamp type handling and test structure to ensure tests work for all platforms. DB2 was giving me fits due to bad assumptions. Thanks to Martin Evans (again) for help in identifying the problems and helping research solutions. This includes the scale/precision values to correctly store full timestamps. 0.45_2 2002-07-19 Moving API usage to ODBC 3.0 specifications. With lots of help from Martin Evans (again!). Thanks Martin!!!!! 0.44 2002-07-18 .44 was never officially released. Fix for do() and execute to handle DB2 correctly. Patch/discovery thanks to Martin Evans. Partly moving towards defaulting to ODBC 3.x standards. 0.43 2002-07-18 Fix for FoxPro (and potentially other) Drivers!!!!! Add support for DBI column_info Fix for binding undef value which comes from dereferencing hash Fix to make all bound columns word (int) aligned in the buffer. 0.42 2002-07-08 Added patches to the tests to support ActiveState's automated build process. Fix ping() to try SQLTables for a test, instead of a strange query. 0.41 2002-04-15 Fixed problem where SQLDescribeParam would fail (probably bug in ODBC driver). Now reverts to SQL_VARCHAR if that happens, instead of failing the query. Fixed error report when using Oracle's driver. There is a known problem. Left the error on the test, but added warning indicating it's a known problem. 0.40 2002-04-12 Most significant change is the change in the default binding type which forces DBD::ODBC to attempt to determine the bind type if one is not passed. I decided to make this the default behaviour to make things as simple as possible. Fixed connection code put in 0.39 to work correctly. Two minor patches for building, one for Cygwin one if both iODBC and unixODBC libraries are installed. Probably need better command line on this, but if someone has the problem, please let me know (and hopefully send a patch with it). 0.39 2002-03-12 See mytest/longbin.pl for demonstration of inserting and retrieving long binary files to/from the db. Uses MD5 algorithm to verify data. Please do some similar test(s) with your database before using it in production. The various bind types are different for each database! Finally removed distribution of old iODBC. See www.iodbc.org or www.unixodbc.org for newer/better versions of the ODBC driver manager for Unix (and others?). Added ability to force ODBC environment version. Fix to SQLColAttributes. Changes to connect sequence to provide better error messages for those using DSN-less connections. 0.38 2002-02-12 Fixed do function (again) thanks to work by Martin Evans. 0.37 2002-02-10 Patches for get_info where return type is string. Patches thanks to Steffen Goldner. Thanks Steffen! Patched get_info to NOT attempt to get data for SQL_DRIVER_HSTMT and SQL_DRIVER_HDESC as they expect data in and have limited value (IMHO). Further fixed build for ODBC 2.x drivers. The new SQLExecDirect code had SQLAllocHandle which is a 3.x function, not a 2.x function. Sigh. I should have caught that the first time. Signed, the Mad-and- not-thorough-enough-patcher. Additionally, a random core dump occurred in the tests, based upon the new SQLExecDirect code. This has been fixed. 0.36 2002-02-10 Fixed build for ODBC 2.x drivers. The new SQLExecDirect code had SQLFreeHandle which is a 3.x function, not a 2.x function. 0.35 2002-02-09 Fixed (finally) multiple result sets with differing numbers of columns. The final fix was to call SQLFreeStmt(SQL_UNBIND) before repreparing the statement for the next query. Added more to the multi-statement tests to ensure the data retrieved was what was expected. Now, DBD::ODBC overrides DBI's do to call SQLExecDirect for simple statements (those without parameters). Please advise if you run into problems. Hopefully, this will provide some small speed improvement for simple "do" statements. You can also call $dbh->func($stmt, ExecDirect). I'm not sure this has great value unless you need to ensure SQLExecDirect is being called. Patches thanks to Merijn Broeren. Thanks Merijn! 0.34 2002-02-07 Further revamped tests to attempt to determine if SQLDescribeParam will work to handle the binding types. The t/08bind.t attempts to determine if SQLDescribeParam is supported. note that Oracle's ODBC driver under NT doesn't work correctly when binding dates using the ODBC date formatting {d } or {ts }. So, test #3 will fail in t/08bind.t New support for primary_key_info thanks to patches by Martin Evans. New support for catalog, schema, table and table_type in table_info thanks to Martin Evans. Thanks Martin for your work and your continuing testing, suggestions and general support! Support for upcoming dbi get_info. 0.33_3 2002-02-04 Revamped tests to include tests for multiple result sets. The tests are ODBC driver platform specific and will be skipped for drivers which do not support multiple result sets. 0.33_2 2002-02-04 Finally tested new binding techniques with SQL Server 2000, but there is a nice little bug in their MDAC and ODBC drivers according to the knowledge base article # Q273813, titled "FIX: "Incorrect Syntax near the Keyword 'by' " Error Message with Column Names of "C", "CA" or "CAS" (Q273813) DBD::ODBC now does not name any of the columns A, B, C, or D they are now COL_A, COL_B, COL_C, COL_D. *** NOTE: *** I AM STRONGLY CONSIDERING MAKING THE NEW BINDING the default for future versions. I do not believe it will break much existing code (if any) as anyone binding to non VARCHAR (without the ODBC driver doing a good conversion from the VARCHAR) will have a problem. It may be subtle, however, since much code will work, but say, binding dates may not with some drivers. Please comment soon... 0.33_1 2002-02-04 *** WARNING: *** Changes to the binding code to allow the use of SQLDescribeParam to determine if the type of column being bound. This is experimental and activated by setting $dbh->{odbc_default_bind_type} = 0; # before creating the query... Currently the default value of odbc_default_bind_type = SQL_VARCHAR which mimicks the current behaviour. If you set odbc_default_bind_type to 0, then SQLDescribeParam will be called to determine the columen type. Not ALL databases handle this correctly. For example, Oracle returns SQL_VARCHAR for all types and attempts to convert to the correct type for us. However, if you use the ODBC escaped date/time format such as: {ts '1998-05-13 00:01:00'} then Oracle complains. If you bind this with a SQL_TIMESTAMP type, however, Oracle's ODBC driver will parse the time/date correctly. Use at your own risk! Fix to dbdimp.c to allow quoted identifiers to begin/end with either " or '. The following will not be treated as if they have a bind placeholder: "isEstimated?" '01-JAN-1987 00:00:00' 'Does anyone insert a ?' 0.32 2002-01-22 More SAP patches to Makfile.PL to eliminate the call to Data Sources A patch to the test (for SAP and potentially others), to allow fallback to SQL_TYPE_DATE in the tests 0.31 2002-01-18 Added SAP patches to build directly against SAP driver instead of driver manager thanks to Flemming Frandsen (thanks!) Added support to fix ping for Oracle8. May break other databases, so please report this as soon as possible. The downside is that we need to actually execute the dummy query. 0.30 2002-01-08 Added ping patch for Solid courtesy of Marko Asplund Updated disconnect to rollback if autocommit is not on. This should silence some errors when disconnecting. Updated SQL_ROWSET_SIZE attribute. Needed to force it to odbc_SQL_ROWSET_SIZE to obey the DBI rules. Added odbc_SQL_DRIVER_ODBC_VER, which obtains the version of the Driver upon connect. This internal capture of the version is a read-only attribute and is used during array binding of parameters. Added odbc_ignore_named_placeholders attribute to facilicate creating triggers within SAPDB and Oracle, to name two. The syntax in these DBs is to allow use of :old and :new to access column values before and after updates. Example: $dbh->{odbc_ignore_named_placeholders} = 1; # set it for all future statements # ignores :foo, :new, etc, but not :1 or ? $dbh->do("create or replace etc :new.D = sysdate etc"); 0.29 2001-08-22 Cygwin patches from Neil Lunn (untested by me). Thanks Neil! SQL_ROWSET_SIZE attribute patch from Andrew Brown There are only 2 additional lines allowing for the setting of SQL_ROWSET_SIZE as db handle option. The purpose to my madness is simple. SqlServer (7 anyway) by default supports only one select statement at once (using std ODBC cursors). According to the SqlServer documentation you can alter the default setting of three values to force the use of server cursors - in which case multiple selects are possible. The code change allows for: $dbh->{SQL_ROWSET_SIZE} = 2; # Any value > 1 For this very purpose. The setting of SQL_ROWSET_SIZE only affects the extended fetch command as far as I can work out and thus setting this option shouldn't affect DBD::ODBC operations directly in any way. Andrew VMS and other patches from Martin Evans (thanks!) [1] a fix for Makefile.PL to build DBD::ODBC on OpenVMS. [2] fix trace message coredumping after SQLDriverConnect [3] fix call to SQLCancel which fails to pass the statement handle properly. [4] consume diagnostics after SQLDriverConnect/SQLConnect call or they remain until the next error occurs and it then looks confusing (this is due to ODBC spec for SQLError). e.g. test 02simple returns a data truncated error only now instead of all the informational diags that are left from the connect call, like the "database changed", "language changed" messages you get from MS SQL Server. Replaced C++ style comments with C style to support more platforms more easily. Fixed bug which use the single quote (') instead of a double quote (") for "literal" column names. This helped when having a colon (:) in the column name. Fixed bug which would cause DBD::ODBC to core-dump (crash) if DBI tracing level was greater than 3. Fixed problem where ODBC.pm would have "use of uninitialized variable" if calling DBI's type_info. Fixed problem where ODBC.xs *may* have an overrun when calling SQLDataSources. Fixed problem with DBI 1.14, where fprintf was being called instead of PerlIO_printf for debug information Fixed problem building with unixODBC per patch from Nick Gorham Added ability to bind_param_inout() via patches from Jeremy Cooper. Haven't figured out a good, non-db specific way to test. My current test platform attempts to determine the connected database type via ugly hacks and will test, if it thinks it can. Feel free to patch and send me something...Also, my current Oracle ODBC driver fails miserably and dies. Updated t/02simple.t to not print an error, when there is not one. 0.28 2000-03-23 Added support for SQLSpecialColumns thanks to patch provided by Martin J. Evans Fixed bug introduced in 0.26 which was introduced of SQLMoreResults was not supported by the driver. 0.27 2000-03-08 Examined patch for ping method to repair problem reported by Chris Bezil. Thanks Chris! Added simple test for ping method working which should identify this in the future. 0.26 2000-03-05 Put in patch for returning only positive rowcounts from dbd_st_execute. The original patch was submitted by Jon Smirl and put back in by David Good. Reasoning seems sound, so I put it back in. However, any databases that return negative rowcounts for specific reasons, will no longer do so. Put in David Good's patch for multiple result sets. Thanks David! See mytest\moreresults.pl for an example of usage. Added readme.txt in iodbcsrc explaining an issue there with iODBC 2.50.3 and C. Put in rudimentary cancel support via SQLCancel. Call $sth->cencel to utilize. However, it is largely untested by me, as I do not have a good sample for this yet. It may come in handy with threaded perl, someday or it may work in a signal handler. 0.25 2000-03-04 Added conditional compilation for SQL_WVARCHAR and SQL_WLONGVARCHAR. If they are not defined by your driver manager, they will not be compiled in to the code. If you would like to support these types on some platforms, you may be able to #define SQL_WVARCHAR (-9) #define SQL_WLONGVARCHAR (-10) Added more long tests with binding in t\09bind.t. Note use of bind_param! 0.24 2000-02-24 Fixed Test #13 in 02simple.t. Would fail, improperly, if there was only one data source defined. Fixed (hopefully) SQL Server 7 and ntext type "Out of Memory!" errors via patch from Thomas Lowery. Thanks Thomas! Added more support for Solid to handle the fact that it does not support data_sources nor SQLDriverConnect. Patch supplied by Samuli Karkkainen [skarkkai@woods.iki.fi]. Thanks! It's untested by me, however. Added some information from Adam Curtin about a bug in iodbc 2.50.3's data_sources. See iodbcsrc\readme.txt. Added information in this pod from Stephen Arehart regarding DSNLess connections. Added fix for sp_prepare/sp_execute bug reported by Paul G. Weiss. Added some code for handling a hint on disconnect where the user gets an error for not committing. 0.22 1999-09-08 Fixed for threaded perl builds. Note that this was tested only on Win32, with no threads in use and using DBI 1.13. Note, for ActiveState/PERL_OBJECT builds, DBI 1.13_01 is required as of 9/8/99. If you are using ActiveState's perl, this can be installed by using PPM. 0.21 Unknown Thanks to all who provided patches! Added ability to connect to an ODBC source without prior creation of DSN. See mytest/contest.pl for example with MS Access. (Also note that you will need documentation for your ODBC driver -- which, sadly, can be difficult to find). Fixed case sensitivity in tests. Hopefully fixed test #4 in t/09bind.t. Updated it to insert the date column and updated it to find the right type of the column. However, it doesn't seem to work on my Linux test machine, using the OpenLink drivers with MS-SQL Server (6.5). It complains about binding the date time. The same test works under Win32 with SQL Server 6.5, Oracle 8.0.3 and MS Access 97 ODBC drivers. Hmmph. Fixed some binary type issues (patches from Jon Smirl) Added SQLStatistics, SQLForeignKeys, SQLPrimaryKeys (patches from Jon Smirl) Thanks (again), Jon, for providing the build_results function to help reduce duplicate code! Worked on LongTruncOk for Openlink drivers. Note: those trying to bind variables need to remember that you should use the following syntax: use DBI; ... $sth->bind_param(1, $str, DBI::SQL_LONGVARCHAR); Added support for unixodbc (per Nick Gorham) Added support for OpenLinks udbc (per Patrick van Kleef) Added Support for esodbc (per Martin Evans) Added Support for Easysoft (per Bob Kline) Changed table_info to produce a list of views, too. Fixed bug in SQLColumns call. Fixed blob handling via patches from Jochen Wiedmann. Added data_sources capability via snarfing code from DBD::Adabas (Jochen Wiedmann) 0.20 1998-08-14 SQLColAttributes fixes for SQL Server and MySQL. Fixed tables method by renaming to new table_info method. Added new tyoe_info_all method. Improved Makefile.PL support for Adabase. 0.19 Unknown Added iODBC source code to distribution.Fall-back to using iODBC header files in some cases. 0.18 Unknown Enhancements to build process. Better handling of errors in error handling code. 0.17 Unknown This release is mostly due to the good work of Jeff Urlwin. My eternal thanks to you Jeff. Fixed "SQLNumResultCols err" on joins and 'order by' with some drivers (see Microsoft Knowledge Base article #Q124899). Thanks to Paul O'Fallon for that one. Added more (probably incomplete) support for unix ODBC in Makefile.PL Increased default SQL_COLUMN_DISPLAY_SIZE and SQL_COLUMN_LENGTH to 2000 for drivers that don't provide a way to query them dynamically. Was 100! When fetch reaches the end-of-data it automatically frees the internal ODBC statement handle and marks the DBI statement handle as inactive (thus an explicit 'finish' is *not* required). Also: LongTruncOk for Oracle ODBC (where fbh->datalen < 0) Added tracing into SQLBindParameter (help diagnose oracle odbc bug) Fixed/worked around bug/result from Latest Oracle ODBC driver where in SQLColAttribute cbInfoValue was changed to 0 to indicate fDesc had a value Added work around for compiling w/ActiveState PRK (PERL_OBJECT) Updated tests to include date insert and type Added more "backup" SQL_xxx types for tests Updated bind test to test binding select NOTE: bind insert fails on Paradox driver (don't know why) Added support for: (see notes below) SQLGetInfo via $dbh->func(xxx, GetInfo) SQLGetTypeInfo via $dbh->func(xxx, GetTypeInfo) SQLDescribeCol via $sth->func(colno, DescribeCol) SQLColAttributes via $sth->func(xxx, colno, ColAttributes) SQLGetFunctions via $dbh->func(xxx, GetFunctions) SQLColumns via $dbh->func(catalog, schema, table, column, 'columns') Fixed $DBI::err to reflect the real ODBC error code which is a 5 char code, not necessarily numeric. Fixed fetches when LongTruncOk == 1. Updated tests to pass more often (hopefully 100% ) Updated tests to test long reading, inserting and the LongTruncOk attribute. Updated tests to be less driver specific. They now rely upon SQLGetTypeInfo I in order to create the tables. The test use this function to "ask" the driver for the name of the SQL type to correctly create long, varchar, etc types. For example, in Oracle the SQL_VARCHAR type is VARCHAR2, while MS Access uses TEXT for the SQL Name. Again, in Oracle the SQL_LONGVARCHAR is LONG, while in Access it's MEMO. The tests currently handle this correctly (at least with Access and Oracle, MS SQL server will be tested also).