import unittest from test import support import subprocess import sys import signal import io import locale import os import errno import tempfile import time import re import sysconfig import warnings import select import shutil import gc import textwrap try: import resource except ImportError: resource = None mswindows = (sys.platform == "win32") # # Depends on the following external programs: Python # if mswindows: SETBINARY = ('import msvcrt; msvcrt.setmode(sys.stdout.fileno(), ' 'os.O_BINARY);') else: SETBINARY = '' try: mkstemp = tempfile.mkstemp except AttributeError: # tempfile.mkstemp is not available def mkstemp(): """Replacement for mkstemp, calling mktemp.""" fname = tempfile.mktemp() return os.open(fname, os.O_RDWR|os.O_CREAT), fname class BaseTestCase(unittest.TestCase): def setUp(self): # Try to minimize the number of children we have so this test # doesn't crash on some buildbots (Alphas in particular). support.reap_children() def tearDown(self): for inst in subprocess._active: inst.wait() subprocess._cleanup() self.assertFalse(subprocess._active, "subprocess._active not empty") def assertStderrEqual(self, stderr, expected, msg=None): # In a debug build, stuff like "[6580 refs]" is printed to stderr at # shutdown time. That frustrates tests trying to check stderr produced # from a spawned Python process. actual = support.strip_python_stderr(stderr) # strip_python_stderr also strips whitespace, so we do too. expected = expected.strip() self.assertEqual(actual, expected, msg) class ProcessTestCase(BaseTestCase): def test_call_seq(self): # call() function with sequence argument rc = subprocess.call([sys.executable, "-c", "import sys; sys.exit(47)"]) self.assertEqual(rc, 47) def test_call_timeout(self): # call() function with timeout argument; we want to test that the child # process gets killed when the timeout expires. If the child isn't # killed, this call will deadlock since subprocess.call waits for the # child. self.assertRaises(subprocess.TimeoutExpired, subprocess.call, [sys.executable, "-c", "while True: pass"], timeout=0.1) def test_check_call_zero(self): # check_call() function with zero return code rc = subprocess.check_call([sys.executable, "-c", "import sys; sys.exit(0)"]) self.assertEqual(rc, 0) def test_check_call_nonzero(self): # check_call() function with non-zero return code with self.assertRaises(subprocess.CalledProcessError) as c: subprocess.check_call([sys.executable, "-c", "import sys; sys.exit(47)"]) self.assertEqual(c.exception.returncode, 47) def test_check_output(self): # check_output() function with zero return code output = subprocess.check_output( [sys.executable, "-c", "print('BDFL')"]) self.assertIn(b'BDFL', output) def test_check_output_nonzero(self): # check_call() function with non-zero return code with self.assertRaises(subprocess.CalledProcessError) as c: subprocess.check_output( [sys.executable, "-c", "import sys; sys.exit(5)"]) self.assertEqual(c.exception.returncode, 5) def test_check_output_stderr(self): # check_output() function stderr redirected to stdout output = subprocess.check_output( [sys.executable, "-c", "import sys; sys.stderr.write('BDFL')"], stderr=subprocess.STDOUT) self.assertIn(b'BDFL', output) def test_check_output_stdout_arg(self): # check_output() function stderr redirected to stdout with self.assertRaises(ValueError) as c: output = subprocess.check_output( [sys.executable, "-c", "print('will not be run')"], stdout=sys.stdout) self.fail("Expected ValueError when stdout arg supplied.") self.assertIn('stdout', c.exception.args[0]) def test_check_output_timeout(self): # check_output() function with timeout arg with self.assertRaises(subprocess.TimeoutExpired) as c: output = subprocess.check_output( [sys.executable, "-c", "import sys, time\n" "sys.stdout.write('BDFL')\n" "sys.stdout.flush()\n" "time.sleep(3600)"], # Some heavily loaded buildbots (sparc Debian 3.x) require # this much time to start and print. timeout=3) self.fail("Expected TimeoutExpired.") self.assertEqual(c.exception.output, b'BDFL') def test_call_kwargs(self): # call() function with keyword args newenv = os.environ.copy() newenv["FRUIT"] = "banana" rc = subprocess.call([sys.executable, "-c", 'import sys, os;' 'sys.exit(os.getenv("FRUIT")=="banana")'], env=newenv) self.assertEqual(rc, 1) def test_invalid_args(self): # Popen() called with invalid arguments should raise TypeError # but Popen.__del__ should not complain (issue #12085) with support.captured_stderr() as s: self.assertRaises(TypeError, subprocess.Popen, invalid_arg_name=1) argcount = subprocess.Popen.__init__.__code__.co_argcount too_many_args = [0] * (argcount + 1) self.assertRaises(TypeError, subprocess.Popen, *too_many_args) self.assertEqual(s.getvalue(), '') def test_stdin_none(self): # .stdin is None when not redirected p = subprocess.Popen([sys.executable, "-c", 'print("banana")'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) self.addCleanup(p.stdout.close) self.addCleanup(p.stderr.close) p.wait() self.assertEqual(p.stdin, None) def test_stdout_none(self): # .stdout is None when not redirected p = subprocess.Popen([sys.executable, "-c", 'print(" this bit of output is from a ' 'test of stdout in a different ' 'process ...")'], stdin=subprocess.PIPE, stderr=subprocess.PIPE) self.addCleanup(p.stdin.close) self.addCleanup(p.stderr.close) p.wait() self.assertEqual(p.stdout, None) def test_stderr_none(self): # .stderr is None when not redirected p = subprocess.Popen([sys.executable, "-c", 'print("banana")'], stdin=subprocess.PIPE, stdout=subprocess.PIPE) self.addCleanup(p.stdout.close) self.addCleanup(p.stdin.close) p.wait() self.assertEqual(p.stderr, None) @unittest.skipIf(sys.base_prefix != sys.prefix, 'Test is not venv-compatible') def test_executable_with_cwd(self): python_dir = os.path.dirname(os.path.realpath(sys.executable)) p = subprocess.Popen(["somethingyoudonthave", "-c", "import sys; sys.exit(47)"], executable=sys.executable, cwd=python_dir) p.wait() self.assertEqual(p.returncode, 47) @unittest.skipIf(sys.base_prefix != sys.prefix, 'Test is not venv-compatible') @unittest.skipIf(sysconfig.is_python_build(), "need an installed Python. See #7774") def test_executable_without_cwd(self): # For a normal installation, it should work without 'cwd' # argument. For test runs in the build directory, see #7774. p = subprocess.Popen(["somethingyoudonthave", "-c", "import sys; sys.exit(47)"], executable=sys.executable) p.wait() self.assertEqual(p.returncode, 47) def test_stdin_pipe(self): # stdin redirection p = subprocess.Popen([sys.executable, "-c", 'import sys; sys.exit(sys.stdin.read() == "pear")'], stdin=subprocess.PIPE) p.stdin.write(b"pear") p.stdin.close() p.wait() self.assertEqual(p.returncode, 1) def test_stdin_filedes(self): # stdin is set to open file descriptor tf = tempfile.TemporaryFile() self.addCleanup(tf.close) d = tf.fileno() os.write(d, b"pear") os.lseek(d, 0, 0) p = subprocess.Popen([sys.executable, "-c", 'import sys; sys.exit(sys.stdin.read() == "pear")'], stdin=d) p.wait() self.assertEqual(p.returncode, 1) def test_stdin_fileobj(self): # stdin is set to open file object tf = tempfile.TemporaryFile() self.addCleanup(tf.close) tf.write(b"pear") tf.seek(0) p = subprocess.Popen([sys.executable, "-c", 'import sys; sys.exit(sys.stdin.read() == "pear")'], stdin=tf) p.wait() self.assertEqual(p.returncode, 1) def test_stdout_pipe(self): # stdout redirection p = subprocess.Popen([sys.executable, "-c", 'import sys; sys.stdout.write("orange")'], stdout=subprocess.PIPE) self.addCleanup(p.stdout.close) self.assertEqual(p.stdout.read(), b"orange") def test_stdout_filedes(self): # stdout is set to open file descriptor tf = tempfile.TemporaryFile() self.addCleanup(tf.close) d = tf.fileno() p = subprocess.Popen([sys.executable, "-c", 'import sys; sys.stdout.write("orange")'], stdout=d) p.wait() os.lseek(d, 0, 0) self.assertEqual(os.read(d, 1024), b"orange") def test_stdout_fileobj(self): # stdout is set to open file object tf = tempfile.TemporaryFile() self.addCleanup(tf.close) p = subprocess.Popen([sys.executable, "-c", 'import sys; sys.stdout.write("orange")'], stdout=tf) p.wait() tf.seek(0) self.assertEqual(tf.read(), b"orange") def test_stderr_pipe(self): # stderr redirection p = subprocess.Popen([sys.executable, "-c", 'import sys; sys.stderr.write("strawberry")'], stderr=subprocess.PIPE) self.addCleanup(p.stderr.close) self.assertStderrEqual(p.stderr.read(), b"strawberry") def test_stderr_filedes(self): # stderr is set to open file descriptor tf = tempfile.TemporaryFile() self.addCleanup(tf.close) d = tf.fileno() p = subprocess.Popen([sys.executable, "-c", 'import sys; sys.stderr.write("strawberry")'], stderr=d) p.wait() os.lseek(d, 0, 0) self.assertStderrEqual(os.read(d, 1024), b"strawberry") def test_stderr_fileobj(self): # stderr is set to open file object tf = tempfile.TemporaryFile() self.addCleanup(tf.close) p = subprocess.Popen([sys.executable, "-c", 'import sys; sys.stderr.write("strawberry")'], stderr=tf) p.wait() tf.seek(0) self.assertStderrEqual(tf.read(), b"strawberry") def test_stdout_stderr_pipe(self): # capture stdout and stderr to the same pipe p = subprocess.Popen([sys.executable, "-c", 'import sys;' 'sys.stdout.write("apple");' 'sys.stdout.flush();' 'sys.stderr.write("orange")'], stdout=subprocess.PIPE, stderr=subprocess.STDOUT) self.addCleanup(p.stdout.close) self.assertStderrEqual(p.stdout.read(), b"appleorange") def test_stdout_stderr_file(self): # capture stdout and stderr to the same open file tf = tempfile.TemporaryFile() self.addCleanup(tf.close) p = subprocess.Popen([sys.executable, "-c", 'import sys;' 'sys.stdout.write("apple");' 'sys.stdout.flush();' 'sys.stderr.write("orange")'], stdout=tf, stderr=tf) p.wait() tf.seek(0) self.assertStderrEqual(tf.read(), b"appleorange") def test_stdout_filedes_of_stdout(self): # stdout is set to 1 (#1531862). cmd = r"import sys, os; sys.exit(os.write(sys.stdout.fileno(), b'.\n'))" rc = subprocess.call([sys.executable, "-c", cmd], stdout=1) self.assertEqual(rc, 2) def test_stdout_devnull(self): p = subprocess.Popen([sys.executable, "-c", 'for i in range(10240):' 'print("x" * 1024)'], stdout=subprocess.DEVNULL) p.wait() self.assertEqual(p.stdout, None) def test_stderr_devnull(self): p = subprocess.Popen([sys.executable, "-c", 'import sys\n' 'for i in range(10240):' 'sys.stderr.write("x" * 1024)'], stderr=subprocess.DEVNULL) p.wait() self.assertEqual(p.stderr, None) def test_stdin_devnull(self): p = subprocess.Popen([sys.executable, "-c", 'import sys;' 'sys.stdin.read(1)'], stdin=subprocess.DEVNULL) p.wait() self.assertEqual(p.stdin, None) def test_cwd(self): tmpdir = tempfile.gettempdir() # We cannot use os.path.realpath to canonicalize the path, # since it doesn't expand Tru64 {memb} strings. See bug 1063571. cwd = os.getcwd() os.chdir(tmpdir) tmpdir = os.getcwd() os.chdir(cwd) p = subprocess.Popen([sys.executable, "-c", 'import sys,os;' 'sys.stdout.write(os.getcwd())'], stdout=subprocess.PIPE, cwd=tmpdir) self.addCleanup(p.stdout.close) normcase = os.path.normcase self.assertEqual(normcase(p.stdout.read().decode("utf-8")), normcase(tmpdir)) def test_env(self): newenv = os.environ.copy() newenv["FRUIT"] = "orange" with subprocess.Popen([sys.executable, "-c", 'import sys,os;' 'sys.stdout.write(os.getenv("FRUIT"))'], stdout=subprocess.PIPE, env=newenv) as p: stdout, stderr = p.communicate() self.assertEqual(stdout, b"orange") # Windows requires at least the SYSTEMROOT environment variable to start # Python @unittest.skipIf(sys.platform == 'win32', 'cannot test an empty env on Windows') @unittest.skipIf(sysconfig.get_config_var('Py_ENABLE_SHARED') is not None, 'the python library cannot be loaded ' 'with an empty environment') def test_empty_env(self): with subprocess.Popen([sys.executable, "-c", 'import os; ' 'print(list(os.environ.keys()))'], stdout=subprocess.PIPE, env={}) as p: stdout, stderr = p.communicate() self.assertIn(stdout.strip(), (b"[]", # Mac OS X adds __CF_USER_TEXT_ENCODING variable to an empty # environment b"['__CF_USER_TEXT_ENCODING']")) def test_communicate_stdin(self): p = subprocess.Popen([sys.executable, "-c", 'import sys;' 'sys.exit(sys.stdin.read() == "pear")'], stdin=subprocess.PIPE) p.communicate(b"pear") self.assertEqual(p.returncode, 1) def test_communicate_stdout(self): p = subprocess.Popen([sys.executable, "-c", 'import sys; sys.stdout.write("pineapple")'], stdout=subprocess.PIPE) (stdout, stderr) = p.communicate() self.assertEqual(stdout, b"pineapple") self.assertEqual(stderr, None) def test_communicate_stderr(self): p = subprocess.Popen([sys.executable, "-c", 'import sys; sys.stderr.write("pineapple")'], stderr=subprocess.PIPE) (stdout, stderr) = p.communicate() self.assertEqual(stdout, None) self.assertStderrEqual(stderr, b"pineapple") def test_communicate(self): p = subprocess.Popen([sys.executable, "-c", 'import sys,os;' 'sys.stderr.write("pineapple");' 'sys.stdout.write(sys.stdin.read())'], stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE) self.addCleanup(p.stdout.close) self.addCleanup(p.stderr.close) self.addCleanup(p.stdin.close) (stdout, stderr) = p.communicate(b"banana") self.assertEqual(stdout, b"banana") self.assertStderrEqual(stderr, b"pineapple") def test_communicate_timeout(self): p = subprocess.Popen([sys.executable, "-c", 'import sys,os,time;' 'sys.stderr.write("pineapple\\n");' 'time.sleep(1);' 'sys.stderr.write("pear\\n");' 'sys.stdout.write(sys.stdin.read())'], universal_newlines=True, stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE) self.assertRaises(subprocess.TimeoutExpired, p.communicate, "banana", timeout=0.3) # Make sure we can keep waiting for it, and that we get the whole output # after it completes. (stdout, stderr) = p.communicate() self.assertEqual(stdout, "banana") self.assertStderrEqual(stderr.encode(), b"pineapple\npear\n") def test_communicate_timeout_large_ouput(self): # Test an expiring timeout while the child is outputting lots of data. p = subprocess.Popen([sys.executable, "-c", 'import sys,os,time;' 'sys.stdout.write("a" * (64 * 1024));' 'time.sleep(0.2);' 'sys.stdout.write("a" * (64 * 1024));' 'time.sleep(0.2);' 'sys.stdout.write("a" * (64 * 1024));' 'time.sleep(0.2);' 'sys.stdout.write("a" * (64 * 1024));'], stdout=subprocess.PIPE) self.assertRaises(subprocess.TimeoutExpired, p.communicate, timeout=0.4) (stdout, _) = p.communicate() self.assertEqual(len(stdout), 4 * 64 * 1024) # Test for the fd leak reported in http://bugs.python.org/issue2791. def test_communicate_pipe_fd_leak(self): for stdin_pipe in (False, True): for stdout_pipe in (False, True): for stderr_pipe in (False, True): options = {} if stdin_pipe: options['stdin'] = subprocess.PIPE if stdout_pipe: options['stdout'] = subprocess.PIPE if stderr_pipe: options['stderr'] = subprocess.PIPE if not options: continue p = subprocess.Popen((sys.executable, "-c", "pass"), **options) p.communicate() if p.stdin is not None: self.assertTrue(p.stdin.closed) if p.stdout is not None: self.assertTrue(p.stdout.closed) if p.stderr is not None: self.assertTrue(p.stderr.closed) def test_communicate_returns(self): # communicate() should return None if no redirection is active p = subprocess.Popen([sys.executable, "-c", "import sys; sys.exit(47)"]) (stdout, stderr) = p.communicate() self.assertEqual(stdout, None) self.assertEqual(stderr, None) def test_communicate_pipe_buf(self): # communicate() with writes larger than pipe_buf # This test will probably deadlock rather than fail, if # communicate() does not work properly. x, y = os.pipe() os.close(x) os.close(y) p = subprocess.Popen([sys.executable, "-c", 'import sys,os;' 'sys.stdout.write(sys.stdin.read(47));' 'sys.stderr.write("x" * %d);' 'sys.stdout.write(sys.stdin.read())' % support.PIPE_MAX_SIZE], stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE) self.addCleanup(p.stdout.close) self.addCleanup(p.stderr.close) self.addCleanup(p.stdin.close) string_to_write = b"a" * support.PIPE_MAX_SIZE (stdout, stderr) = p.communicate(string_to_write) self.assertEqual(stdout, string_to_write) def test_writes_before_communicate(self): # stdin.write before communicate() p = subprocess.Popen([sys.executable, "-c", 'import sys,os;' 'sys.stdout.write(sys.stdin.read())'], stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE) self.addCleanup(p.stdout.close) self.addCleanup(p.stderr.close) self.addCleanup(p.stdin.close) p.stdin.write(b"banana") (stdout, stderr) = p.communicate(b"split") self.assertEqual(stdout, b"bananasplit") self.assertStderrEqual(stderr, b"") def test_universal_newlines(self): p = subprocess.Popen([sys.executable, "-c", 'import sys,os;' + SETBINARY + 'buf = sys.stdout.buffer;' 'buf.write(sys.stdin.readline().encode());' 'buf.flush();' 'buf.write(b"line2\\n");' 'buf.flush();' 'buf.write(sys.stdin.read().encode());' 'buf.flush();' 'buf.write(b"line4\\n");' 'buf.flush();' 'buf.write(b"line5\\r\\n");' 'buf.flush();' 'buf.write(b"line6\\r");' 'buf.flush();' 'buf.write(b"\\nline7");' 'buf.flush();' 'buf.write(b"\\nline8");'], stdin=subprocess.PIPE, stdout=subprocess.PIPE, universal_newlines=1) p.stdin.write("line1\n") self.assertEqual(p.stdout.readline(), "line1\n") p.stdin.write("line3\n") p.stdin.close() self.addCleanup(p.stdout.close) self.assertEqual(p.stdout.readline(), "line2\n") self.assertEqual(p.stdout.read(6), "line3\n") self.assertEqual(p.stdout.read(), "line4\nline5\nline6\nline7\nline8") def test_universal_newlines_communicate(self): # universal newlines through communicate() p = subprocess.Popen([sys.executable, "-c", 'import sys,os;' + SETBINARY + 'buf = sys.stdout.buffer;' 'buf.write(b"line2\\n");' 'buf.flush();' 'buf.write(b"line4\\n");' 'buf.flush();' 'buf.write(b"line5\\r\\n");' 'buf.flush();' 'buf.write(b"line6\\r");' 'buf.flush();' 'buf.write(b"\\nline7");' 'buf.flush();' 'buf.write(b"\\nline8");'], stderr=subprocess.PIPE, stdout=subprocess.PIPE, universal_newlines=1) self.addCleanup(p.stdout.close) self.addCleanup(p.stderr.close) (stdout, stderr) = p.communicate() self.assertEqual(stdout, "line2\nline4\nline5\nline6\nline7\nline8") def test_universal_newlines_communicate_stdin(self): # universal newlines through communicate(), with only stdin p = subprocess.Popen([sys.executable, "-c", 'import sys,os;' + SETBINARY + textwrap.dedent(''' s = sys.stdin.readline() assert s == "line1\\n", repr(s) s = sys.stdin.read() assert s == "line3\\n", repr(s) ''')], stdin=subprocess.PIPE, universal_newlines=1) (stdout, stderr) = p.communicate("line1\nline3\n") self.assertEqual(p.returncode, 0) def test_universal_newlines_communicate_input_none(self): # Test communicate(input=None) with universal newlines. # # We set stdout to PIPE because, as of this writing, a different # code path is tested when the number of pipes is zero or one. p = subprocess.Popen([sys.executable, "-c", "pass"], stdin=subprocess.PIPE, stdout=subprocess.PIPE, universal_newlines=True) p.communicate() self.assertEqual(p.returncode, 0) def test_universal_newlines_communicate_stdin_stdout_stderr(self): # universal newlines through communicate(), with stdin, stdout, stderr p = subprocess.Popen([sys.executable, "-c", 'import sys,os;' + SETBINARY + textwrap.dedent(''' s = sys.stdin.buffer.readline() sys.stdout.buffer.write(s) sys.stdout.buffer.write(b"line2\\r") sys.stderr.buffer.write(b"eline2\\n") s = sys.stdin.buffer.read() sys.stdout.buffer.write(s) sys.stdout.buffer.write(b"line4\\n") sys.stdout.buffer.write(b"line5\\r\\n") sys.stderr.buffer.write(b"eline6\\r") sys.stderr.buffer.write(b"eline7\\r\\nz") ''')], stdin=subprocess.PIPE, stderr=subprocess.PIPE, stdout=subprocess.PIPE, universal_newlines=True) self.addCleanup(p.stdout.close) self.addCleanup(p.stderr.close) (stdout, stderr) = p.communicate("line1\nline3\n") self.assertEqual(p.returncode, 0) self.assertEqual("line1\nline2\nline3\nline4\nline5\n", stdout) # Python debug build push something like "[42442 refs]\n" # to stderr at exit of subprocess. # Don't use assertStderrEqual because it strips CR and LF from output. self.assertTrue(stderr.startswith("eline2\neline6\neline7\n")) def test_universal_newlines_communicate_encodings(self): # Check that universal newlines mode works for various encodings, # in particular for encodings in the UTF-16 and UTF-32 families. # See issue #15595. # # UTF-16 and UTF-32-BE are sufficient to check both with BOM and # without, and UTF-16 and UTF-32. for encoding in ['utf-16', 'utf-32-be']: old_getpreferredencoding = locale.getpreferredencoding # Indirectly via io.TextIOWrapper, Popen() defaults to # locale.getpreferredencoding(False) and earlier in Python 3.2 to # locale.getpreferredencoding(). def getpreferredencoding(do_setlocale=True): return encoding code = ("import sys; " r"sys.stdout.buffer.write('1\r\n2\r3\n4'.encode('%s'))" % encoding) args = [sys.executable, '-c', code] try: locale.getpreferredencoding = getpreferredencoding # We set stdin to be non-None because, as of this writing, # a different code path is used when the number of pipes is # zero or one. popen = subprocess.Popen(args, universal_newlines=True, stdin=subprocess.PIPE, stdout=subprocess.PIPE) stdout, stderr = popen.communicate(input='') finally: locale.getpreferredencoding = old_getpreferredencoding self.assertEqual(stdout, '1\n2\n3\n4') def test_no_leaking(self): # Make sure we leak no resources if not mswindows: max_handles = 1026 # too much for most UNIX systems else: max_handles = 2050 # too much for (at least some) Windows setups handles = [] tmpdir = tempfile.mkdtemp() try: for i in range(max_handles): try: tmpfile = os.path.join(tmpdir, support.TESTFN) handles.append(os.open(tmpfile, os.O_WRONLY|os.O_CREAT)) except OSError as e: if e.errno != errno.EMFILE: raise break else: self.skipTest("failed to reach the file descriptor limit " "(tried %d)" % max_handles) # Close a couple of them (should be enough for a subprocess) for i in range(10): os.close(handles.pop()) # Loop creating some subprocesses. If one of them leaks some fds, # the next loop iteration will fail by reaching the max fd limit. for i in range(15): p = subprocess.Popen([sys.executable, "-c", "import sys;" "sys.stdout.write(sys.stdin.read())"], stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE) data = p.communicate(b"lime")[0] self.assertEqual(data, b"lime") finally: for h in handles: os.close(h) shutil.rmtree(tmpdir) def test_list2cmdline(self): self.assertEqual(subprocess.list2cmdline(['a b c', 'd', 'e']), '"a b c" d e') self.assertEqual(subprocess.list2cmdline(['ab"c', '\\', 'd']), 'ab\\"c \\ d') self.assertEqual(subprocess.list2cmdline(['ab"c', ' \\', 'd']), 'ab\\"c " \\\\" d') self.assertEqual(subprocess.list2cmdline(['a\\\\\\b', 'de fg', 'h']), 'a\\\\\\b "de fg" h') self.assertEqual(subprocess.list2cmdline(['a\\"b', 'c', 'd']), 'a\\\\\\"b c d') self.assertEqual(subprocess.list2cmdline(['a\\\\b c', 'd', 'e']), '"a\\\\b c" d e') self.assertEqual(subprocess.list2cmdline(['a\\\\b\\ c', 'd', 'e']), '"a\\\\b\\ c" d e') self.assertEqual(subprocess.list2cmdline(['ab', '']), 'ab ""') def test_poll(self): p = subprocess.Popen([sys.executable, "-c", "import os; os.read(0, 1)"], stdin=subprocess.PIPE) self.addCleanup(p.stdin.close) self.assertIsNone(p.poll()) os.write(p.stdin.fileno(), b'A') p.wait() # Subsequent invocations should just return the returncode self.assertEqual(p.poll(), 0) def test_wait(self): p = subprocess.Popen([sys.executable, "-c", "pass"]) self.assertEqual(p.wait(), 0) # Subsequent invocations should just return the returncode self.assertEqual(p.wait(), 0) def test_wait_timeout(self): p = subprocess.Popen([sys.executable, "-c", "import time; time.sleep(0.1)"]) with self.assertRaises(subprocess.TimeoutExpired) as c: p.wait(timeout=0.01) self.assertIn("0.01", str(c.exception)) # For coverage of __str__. # Some heavily loaded buildbots (sparc Debian 3.x) require this much # time to start. self.assertEqual(p.wait(timeout=3), 0) def test_invalid_bufsize(self): # an invalid type of the bufsize argument should raise # TypeError. with self.assertRaises(TypeError): subprocess.Popen([sys.executable, "-c", "pass"], "orange") def test_bufsize_is_none(self): # bufsize=None should be the same as bufsize=0. p = subprocess.Popen([sys.executable, "-c", "pass"], None) self.assertEqual(p.wait(), 0) # Again with keyword arg p = subprocess.Popen([sys.executable, "-c", "pass"], bufsize=None) self.assertEqual(p.wait(), 0) def test_leaking_fds_on_error(self): # see bug #5179: Popen leaks file descriptors to PIPEs if # the child fails to execute; this will eventually exhaust # the maximum number of open fds. 1024 seems a very common # value for that limit, but Windows has 2048, so we loop # 1024 times (each call leaked two fds). for i in range(1024): # Windows raises IOError. Others raise OSError. with self.assertRaises(EnvironmentError) as c: subprocess.Popen(['nonexisting_i_hope'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) # ignore errors that indicate the command was not found if c.exception.errno not in (errno.ENOENT, errno.EACCES): raise c.exception def test_issue8780(self): # Ensure that stdout is inherited from the parent # if stdout=PIPE is not used code = ';'.join(( 'import subprocess, sys', 'retcode = subprocess.call(' "[sys.executable, '-c', 'print(\"Hello World!\")'])", 'assert retcode == 0')) output = subprocess.check_output([sys.executable, '-c', code]) self.assertTrue(output.startswith(b'Hello World!'), ascii(output)) def test_handles_closed_on_exception(self): # If CreateProcess exits with an error, ensure the # duplicate output handles are released ifhandle, ifname = mkstemp() ofhandle, ofname = mkstemp() efhandle, efname = mkstemp() try: subprocess.Popen (["*"], stdin=ifhandle, stdout=ofhandle, stderr=efhandle) except OSError: os.close(ifhandle) os.remove(ifname) os.close(ofhandle) os.remove(ofname) os.close(efhandle) os.remove(efname) self.assertFalse(os.path.exists(ifname)) self.assertFalse(os.path.exists(ofname)) self.assertFalse(os.path.exists(efname)) def test_communicate_epipe(self): # Issue 10963: communicate() should hide EPIPE p = subprocess.Popen([sys.executable, "-c", 'pass'], stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE) self.addCleanup(p.stdout.close) self.addCleanup(p.stderr.close) self.addCleanup(p.stdin.close) p.communicate(b"x" * 2**20) def test_communicate_epipe_only_stdin(self): # Issue 10963: communicate() should hide EPIPE p = subprocess.Popen([sys.executable, "-c", 'pass'], stdin=subprocess.PIPE) self.addCleanup(p.stdin.close) p.wait() p.communicate(b"x" * 2**20) @unittest.skipUnless(hasattr(signal, 'SIGUSR1'), "Requires signal.SIGUSR1") @unittest.skipUnless(hasattr(os, 'kill'), "Requires os.kill") @unittest.skipUnless(hasattr(os, 'getppid'), "Requires os.getppid") def test_communicate_eintr(self): # Issue #12493: communicate() should handle EINTR def handler(signum, frame): pass old_handler = signal.signal(signal.SIGUSR1, handler) self.addCleanup(signal.signal, signal.SIGUSR1, old_handler) args = [sys.executable, "-c", 'import os, signal;' 'os.kill(os.getppid(), signal.SIGUSR1)'] for stream in ('stdout', 'stderr'): kw = {stream: subprocess.PIPE} with subprocess.Popen(args, **kw) as process: # communicate() will be interrupted by SIGUSR1 process.communicate() # context manager class _SuppressCoreFiles(object): """Try to prevent core files from being created.""" old_limit = None def __enter__(self): """Try to save previous ulimit, then set it to (0, 0).""" if resource is not None: try: self.old_limit = resource.getrlimit(resource.RLIMIT_CORE) resource.setrlimit(resource.RLIMIT_CORE, (0, 0)) except (ValueError, resource.error): pass if sys.platform == 'darwin': # Check if the 'Crash Reporter' on OSX was configured # in 'Developer' mode and warn that it will get triggered # when it is. # # This assumes that this context manager is used in tests # that might trigger the next manager. value = subprocess.Popen(['/usr/bin/defaults', 'read', 'com.apple.CrashReporter', 'DialogType'], stdout=subprocess.PIPE).communicate()[0] if value.strip() == b'developer': print("this tests triggers the Crash Reporter, " "that is intentional", end='') sys.stdout.flush() def __exit__(self, *args): """Return core file behavior to default.""" if self.old_limit is None: return if resource is not None: try: resource.setrlimit(resource.RLIMIT_CORE, self.old_limit) except (ValueError, resource.error): pass @unittest.skipIf(mswindows, "POSIX specific tests") class POSIXProcessTestCase(BaseTestCase): def test_exceptions(self): nonexistent_dir = "/_this/pa.th/does/not/exist" try: os.chdir(nonexistent_dir) except OSError as e: # This avoids hard coding the errno value or the OS perror() # string and instead capture the exception that we want to see # below for comparison. desired_exception = e desired_exception.strerror += ': ' + repr(sys.executable) else: self.fail("chdir to nonexistant directory %s succeeded." % nonexistent_dir) # Error in the child re-raised in the parent. try: p = subprocess.Popen([sys.executable, "-c", ""], cwd=nonexistent_dir) except OSError as e: # Test that the child process chdir failure actually makes # it up to the parent process as the correct exception. self.assertEqual(desired_exception.errno, e.errno) self.assertEqual(desired_exception.strerror, e.strerror) else: self.fail("Expected OSError: %s" % desired_exception) def test_restore_signals(self): # Code coverage for both values of restore_signals to make sure it # at least does not blow up. # A test for behavior would be complex. Contributions welcome. subprocess.call([sys.executable, "-c", ""], restore_signals=True) subprocess.call([sys.executable, "-c", ""], restore_signals=False) def test_start_new_session(self): # For code coverage of calling setsid(). We don't care if we get an # EPERM error from it depending on the test execution environment, that # still indicates that it was called. try: output = subprocess.check_output( [sys.executable, "-c", "import os; print(os.getpgid(os.getpid()))"], start_new_session=True) except OSError as e: if e.errno != errno.EPERM: raise else: parent_pgid = os.getpgid(os.getpid()) child_pgid = int(output) self.assertNotEqual(parent_pgid, child_pgid) def test_run_abort(self): # returncode handles signal termination with _SuppressCoreFiles(): p = subprocess.Popen([sys.executable, "-c", 'import os; os.abort()']) p.wait() self.assertEqual(-p.returncode, signal.SIGABRT) def test_preexec(self): # DISCLAIMER: Setting environment variables is *not* a good use # of a preexec_fn. This is merely a test. p = subprocess.Popen([sys.executable, "-c", 'import sys,os;' 'sys.stdout.write(os.getenv("FRUIT"))'], stdout=subprocess.PIPE, preexec_fn=lambda: os.putenv("FRUIT", "apple")) self.addCleanup(p.stdout.close) self.assertEqual(p.stdout.read(), b"apple") def test_preexec_exception(self): def raise_it(): raise ValueError("What if two swallows carried a coconut?") try: p = subprocess.Popen([sys.executable, "-c", ""], preexec_fn=raise_it) except RuntimeError as e: self.assertTrue( subprocess._posixsubprocess, "Expected a ValueError from the preexec_fn") except ValueError as e: self.assertIn("coconut", e.args[0]) else: self.fail("Exception raised by preexec_fn did not make it " "to the parent process.") def test_preexec_gc_module_failure(self): # This tests the code that disables garbage collection if the child # process will execute any Python. def raise_runtime_error(): raise RuntimeError("this shouldn't escape") enabled = gc.isenabled() orig_gc_disable = gc.disable orig_gc_isenabled = gc.isenabled try: gc.disable() self.assertFalse(gc.isenabled()) subprocess.call([sys.executable, '-c', ''], preexec_fn=lambda: None) self.assertFalse(gc.isenabled(), "Popen enabled gc when it shouldn't.") gc.enable() self.assertTrue(gc.isenabled()) subprocess.call([sys.executable, '-c', ''], preexec_fn=lambda: None) self.assertTrue(gc.isenabled(), "Popen left gc disabled.") gc.disable = raise_runtime_error self.assertRaises(RuntimeError, subprocess.Popen, [sys.executable, '-c', ''], preexec_fn=lambda: None) del gc.isenabled # force an AttributeError self.assertRaises(AttributeError, subprocess.Popen, [sys.executable, '-c', ''], preexec_fn=lambda: None) finally: gc.disable = orig_gc_disable gc.isenabled = orig_gc_isenabled if not enabled: gc.disable() def test_args_string(self): # args is a string fd, fname = mkstemp() # reopen in text mode with open(fd, "w", errors="surrogateescape") as fobj: fobj.write("#!/bin/sh\n") fobj.write("exec '%s' -c 'import sys; sys.exit(47)'\n" % sys.executable) os.chmod(fname, 0o700) p = subprocess.Popen(fname) p.wait() os.remove(fname) self.assertEqual(p.returncode, 47) def test_invalid_args(self): # invalid arguments should raise ValueError self.assertRaises(ValueError, subprocess.call, [sys.executable, "-c", "import sys; sys.exit(47)"], startupinfo=47) self.assertRaises(ValueError, subprocess.call, [sys.executable, "-c", "import sys; sys.exit(47)"], creationflags=47) def test_shell_sequence(self): # Run command through the shell (sequence) newenv = os.environ.copy() newenv["FRUIT"] = "apple" p = subprocess.Popen(["echo $FRUIT"], shell=1, stdout=subprocess.PIPE, env=newenv) self.addCleanup(p.stdout.close) self.assertEqual(p.stdout.read().strip(b" \t\r\n\f"), b"apple") def test_shell_string(self): # Run command through the shell (string) newenv = os.environ.copy() newenv["FRUIT"] = "apple" p = subprocess.Popen("echo $FRUIT", shell=1, stdout=subprocess.PIPE, env=newenv) self.addCleanup(p.stdout.close) self.assertEqual(p.stdout.read().strip(b" \t\r\n\f"), b"apple") def test_call_string(self): # call() function with string argument on UNIX fd, fname = mkstemp() # reopen in text mode with open(fd, "w", errors="surrogateescape") as fobj: fobj.write("#!/bin/sh\n") fobj.write("exec '%s' -c 'import sys; sys.exit(47)'\n" % sys.executable) os.chmod(fname, 0o700) rc = subprocess.call(fname) os.remove(fname) self.assertEqual(rc, 47) def test_specific_shell(self): # Issue #9265: Incorrect name passed as arg[0]. shells = [] for prefix in ['/bin', '/usr/bin/', '/usr/local/bin']: for name in ['bash', 'ksh']: sh = os.path.join(prefix, name) if os.path.isfile(sh): shells.append(sh) if not shells: # Will probably work for any shell but csh. self.skipTest("bash or ksh required for this test") sh = '/bin/sh' if os.path.isfile(sh) and not os.path.islink(sh): # Test will fail if /bin/sh is a symlink to csh. shells.append(sh) for sh in shells: p = subprocess.Popen("echo $0", executable=sh, shell=True, stdout=subprocess.PIPE) self.addCleanup(p.stdout.close) self.assertEqual(p.stdout.read().strip(), bytes(sh, 'ascii')) def _kill_process(self, method, *args): # Do not inherit file handles from the parent. # It should fix failures on some platforms. p = subprocess.Popen([sys.executable, "-c", """if 1: import sys, time sys.stdout.write('x\\n') sys.stdout.flush() time.sleep(30) """], close_fds=True, stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE) # Wait for the interpreter to be completely initialized before # sending any signal. p.stdout.read(1) getattr(p, method)(*args) return p def _kill_dead_process(self, method, *args): # Do not inherit file handles from the parent. # It should fix failures on some platforms. p = subprocess.Popen([sys.executable, "-c", """if 1: import sys, time sys.stdout.write('x\\n') sys.stdout.flush() """], close_fds=True, stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE) # Wait for the interpreter to be completely initialized before # sending any signal. p.stdout.read(1) # The process should end after this time.sleep(1) # This shouldn't raise even though the child is now dead getattr(p, method)(*args) p.communicate() def test_send_signal(self): p = self._kill_process('send_signal', signal.SIGINT) _, stderr = p.communicate() self.assertIn(b'KeyboardInterrupt', stderr) self.assertNotEqual(p.wait(), 0) def test_kill(self): p = self._kill_process('kill') _, stderr = p.communicate() self.assertStderrEqual(stderr, b'') self.assertEqual(p.wait(), -signal.SIGKILL) def test_terminate(self): p = self._kill_process('terminate') _, stderr = p.communicate() self.assertStderrEqual(stderr, b'') self.assertEqual(p.wait(), -signal.SIGTERM) def test_send_signal_dead(self): # Sending a signal to a dead process self._kill_dead_process('send_signal', signal.SIGINT) def test_kill_dead(self): # Killing a dead process self._kill_dead_process('kill') def test_terminate_dead(self): # Terminating a dead process self._kill_dead_process('terminate') def check_close_std_fds(self, fds): # Issue #9905: test that subprocess pipes still work properly with # some standard fds closed stdin = 0 newfds = [] for a in fds: b = os.dup(a) newfds.append(b) if a == 0: stdin = b try: for fd in fds: os.close(fd) out, err = subprocess.Popen([sys.executable, "-c", 'import sys;' 'sys.stdout.write("apple");' 'sys.stdout.flush();' 'sys.stderr.write("orange")'], stdin=stdin, stdout=subprocess.PIPE, stderr=subprocess.PIPE).communicate() err = support.strip_python_stderr(err) self.assertEqual((out, err), (b'apple', b'orange')) finally: for b, a in zip(newfds, fds): os.dup2(b, a) for b in newfds: os.close(b) def test_close_fd_0(self): self.check_close_std_fds([0]) def test_close_fd_1(self): self.check_close_std_fds([1]) def test_close_fd_2(self): self.check_close_std_fds([2]) def test_close_fds_0_1(self): self.check_close_std_fds([0, 1]) def test_close_fds_0_2(self): self.check_close_std_fds([0, 2]) def test_close_fds_1_2(self): self.check_close_std_fds([1, 2]) def test_close_fds_0_1_2(self): # Issue #10806: test that subprocess pipes still work properly with # all standard fds closed. self.check_close_std_fds([0, 1, 2]) def test_remapping_std_fds(self): # open up some temporary files temps = [mkstemp() for i in range(3)] try: temp_fds = [fd for fd, fname in temps] # unlink the files -- we won't need to reopen them for fd, fname in temps: os.unlink(fname) # write some data to what will become stdin, and rewind os.write(temp_fds[1], b"STDIN") os.lseek(temp_fds[1], 0, 0) # move the standard file descriptors out of the way saved_fds = [os.dup(fd) for fd in range(3)] try: # duplicate the file objects over the standard fd's for fd, temp_fd in enumerate(temp_fds): os.dup2(temp_fd, fd) # now use those files in the "wrong" order, so that subprocess # has to rearrange them in the child p = subprocess.Popen([sys.executable, "-c", 'import sys; got = sys.stdin.read();' 'sys.stdout.write("got %s"%got); sys.stderr.write("err")'], stdin=temp_fds[1], stdout=temp_fds[2], stderr=temp_fds[0]) p.wait() finally: # restore the original fd's underneath sys.stdin, etc. for std, saved in enumerate(saved_fds): os.dup2(saved, std) os.close(saved) for fd in temp_fds: os.lseek(fd, 0, 0) out = os.read(temp_fds[2], 1024) err = support.strip_python_stderr(os.read(temp_fds[0], 1024)) self.assertEqual(out, b"got STDIN") self.assertEqual(err, b"err") finally: for fd in temp_fds: os.close(fd) def check_swap_fds(self, stdin_no, stdout_no, stderr_no): # open up some temporary files temps = [mkstemp() for i in range(3)] temp_fds = [fd for fd, fname in temps] try: # unlink the files -- we won't need to reopen them for fd, fname in temps: os.unlink(fname) # save a copy of the standard file descriptors saved_fds = [os.dup(fd) for fd in range(3)] try: # duplicate the temp files over the standard fd's 0, 1, 2 for fd, temp_fd in enumerate(temp_fds): os.dup2(temp_fd, fd) # write some data to what will become stdin, and rewind os.write(stdin_no, b"STDIN") os.lseek(stdin_no, 0, 0) # now use those files in the given order, so that subprocess # has to rearrange them in the child p = subprocess.Popen([sys.executable, "-c", 'import sys; got = sys.stdin.read();' 'sys.stdout.write("got %s"%got); sys.stderr.write("err")'], stdin=stdin_no, stdout=stdout_no, stderr=stderr_no) p.wait() for fd in temp_fds: os.lseek(fd, 0, 0) out = os.read(stdout_no, 1024) err = support.strip_python_stderr(os.read(stderr_no, 1024)) finally: for std, saved in enumerate(saved_fds): os.dup2(saved, std) os.close(saved) self.assertEqual(out, b"got STDIN") self.assertEqual(err, b"err") finally: for fd in temp_fds: os.close(fd) # When duping fds, if there arises a situation where one of the fds is # either 0, 1 or 2, it is possible that it is overwritten (#12607). # This tests all combinations of this. def test_swap_fds(self): self.check_swap_fds(0, 1, 2) self.check_swap_fds(0, 2, 1) self.check_swap_fds(1, 0, 2) self.check_swap_fds(1, 2, 0) self.check_swap_fds(2, 0, 1) self.check_swap_fds(2, 1, 0) def test_surrogates_error_message(self): def prepare(): raise ValueError("surrogate:\uDCff") try: subprocess.call( [sys.executable, "-c", "pass"], preexec_fn=prepare) except ValueError as err: # Pure Python implementations keeps the message self.assertIsNone(subprocess._posixsubprocess) self.assertEqual(str(err), "surrogate:\uDCff") except RuntimeError as err: # _posixsubprocess uses a default message self.assertIsNotNone(subprocess._posixsubprocess) self.assertEqual(str(err), "Exception occurred in preexec_fn.") else: self.fail("Expected ValueError or RuntimeError") def test_undecodable_env(self): for key, value in (('test', 'abc\uDCFF'), ('test\uDCFF', '42')): # test str with surrogates script = "import os; print(ascii(os.getenv(%s)))" % repr(key) env = os.environ.copy() env[key] = value # Use C locale to get ascii for the locale encoding to force # surrogate-escaping of \xFF in the child process; otherwise it can # be decoded as-is if the default locale is latin-1. env['LC_ALL'] = 'C' stdout = subprocess.check_output( [sys.executable, "-c", script], env=env) stdout = stdout.rstrip(b'\n\r') self.assertEqual(stdout.decode('ascii'), ascii(value)) # test bytes key = key.encode("ascii", "surrogateescape") value = value.encode("ascii", "surrogateescape") script = "import os; print(ascii(os.getenvb(%s)))" % repr(key) env = os.environ.copy() env[key] = value stdout = subprocess.check_output( [sys.executable, "-c", script], env=env) stdout = stdout.rstrip(b'\n\r') self.assertEqual(stdout.decode('ascii'), ascii(value)) def test_bytes_program(self): abs_program = os.fsencode(sys.executable) path, program = os.path.split(sys.executable) program = os.fsencode(program) # absolute bytes path exitcode = subprocess.call([abs_program, "-c", "pass"]) self.assertEqual(exitcode, 0) # absolute bytes path as a string cmd = b"'" + abs_program + b"' -c pass" exitcode = subprocess.call(cmd, shell=True) self.assertEqual(exitcode, 0) # bytes program, unicode PATH env = os.environ.copy() env["PATH"] = path exitcode = subprocess.call([program, "-c", "pass"], env=env) self.assertEqual(exitcode, 0) # bytes program, bytes PATH envb = os.environb.copy() envb[b"PATH"] = os.fsencode(path) exitcode = subprocess.call([program, "-c", "pass"], env=envb) self.assertEqual(exitcode, 0) def test_pipe_cloexec(self): sleeper = support.findfile("input_reader.py", subdir="subprocessdata") fd_status = support.findfile("fd_status.py", subdir="subprocessdata") p1 = subprocess.Popen([sys.executable, sleeper], stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE, close_fds=False) self.addCleanup(p1.communicate, b'') p2 = subprocess.Popen([sys.executable, fd_status], stdout=subprocess.PIPE, close_fds=False) output, error = p2.communicate() result_fds = set(map(int, output.split(b','))) unwanted_fds = set([p1.stdin.fileno(), p1.stdout.fileno(), p1.stderr.fileno()]) self.assertFalse(result_fds & unwanted_fds, "Expected no fds from %r to be open in child, " "found %r" % (unwanted_fds, result_fds & unwanted_fds)) def test_pipe_cloexec_real_tools(self): qcat = support.findfile("qcat.py", subdir="subprocessdata") qgrep = support.findfile("qgrep.py", subdir="subprocessdata") subdata = b'zxcvbn' data = subdata * 4 + b'\n' p1 = subprocess.Popen([sys.executable, qcat], stdin=subprocess.PIPE, stdout=subprocess.PIPE, close_fds=False) p2 = subprocess.Popen([sys.executable, qgrep, subdata], stdin=p1.stdout, stdout=subprocess.PIPE, close_fds=False) self.addCleanup(p1.wait) self.addCleanup(p2.wait) def kill_p1(): try: p1.terminate() except ProcessLookupError: pass def kill_p2(): try: p2.terminate() except ProcessLookupError: pass self.addCleanup(kill_p1) self.addCleanup(kill_p2) p1.stdin.write(data) p1.stdin.close() readfiles, ignored1, ignored2 = select.select([p2.stdout], [], [], 10) self.assertTrue(readfiles, "The child hung") self.assertEqual(p2.stdout.read(), data) p1.stdout.close() p2.stdout.close() def test_close_fds(self): fd_status = support.findfile("fd_status.py", subdir="subprocessdata") fds = os.pipe() self.addCleanup(os.close, fds[0]) self.addCleanup(os.close, fds[1]) open_fds = set(fds) # add a bunch more fds for _ in range(9): fd = os.open("/dev/null", os.O_RDONLY) self.addCleanup(os.close, fd) open_fds.add(fd) p = subprocess.Popen([sys.executable, fd_status], stdout=subprocess.PIPE, close_fds=False) output, ignored = p.communicate() remaining_fds = set(map(int, output.split(b','))) self.assertEqual(remaining_fds & open_fds, open_fds, "Some fds were closed") p = subprocess.Popen([sys.executable, fd_status], stdout=subprocess.PIPE, close_fds=True) output, ignored = p.communicate() remaining_fds = set(map(int, output.split(b','))) self.assertFalse(remaining_fds & open_fds, "Some fds were left open") self.assertIn(1, remaining_fds, "Subprocess failed") # Keep some of the fd's we opened open in the subprocess. # This tests _posixsubprocess.c's proper handling of fds_to_keep. fds_to_keep = set(open_fds.pop() for _ in range(8)) p = subprocess.Popen([sys.executable, fd_status], stdout=subprocess.PIPE, close_fds=True, pass_fds=()) output, ignored = p.communicate() remaining_fds = set(map(int, output.split(b','))) self.assertFalse(remaining_fds & fds_to_keep & open_fds, "Some fds not in pass_fds were left open") self.assertIn(1, remaining_fds, "Subprocess failed") # Mac OS X Tiger (10.4) has a kernel bug: sometimes, the file # descriptor of a pipe closed in the parent process is valid in the # child process according to fstat(), but the mode of the file # descriptor is invalid, and read or write raise an error. @support.requires_mac_ver(10, 5) def test_pass_fds(self): fd_status = support.findfile("fd_status.py", subdir="subprocessdata") open_fds = set() for x in range(5): fds = os.pipe() self.addCleanup(os.close, fds[0]) self.addCleanup(os.close, fds[1]) open_fds.update(fds) for fd in open_fds: p = subprocess.Popen([sys.executable, fd_status], stdout=subprocess.PIPE, close_fds=True, pass_fds=(fd, )) output, ignored = p.communicate() remaining_fds = set(map(int, output.split(b','))) to_be_closed = open_fds - {fd} self.assertIn(fd, remaining_fds, "fd to be passed not passed") self.assertFalse(remaining_fds & to_be_closed, "fd to be closed passed") # pass_fds overrides close_fds with a warning. with self.assertWarns(RuntimeWarning) as context: self.assertFalse(subprocess.call( [sys.executable, "-c", "import sys; sys.exit(0)"], close_fds=False, pass_fds=(fd, ))) self.assertIn('overriding close_fds', str(context.warning)) def test_stdout_stdin_are_single_inout_fd(self): with io.open(os.devnull, "r+") as inout: p = subprocess.Popen([sys.executable, "-c", "import sys; sys.exit(0)"], stdout=inout, stdin=inout) p.wait() def test_stdout_stderr_are_single_inout_fd(self): with io.open(os.devnull, "r+") as inout: p = subprocess.Popen([sys.executable, "-c", "import sys; sys.exit(0)"], stdout=inout, stderr=inout) p.wait() def test_stderr_stdin_are_single_inout_fd(self): with io.open(os.devnull, "r+") as inout: p = subprocess.Popen([sys.executable, "-c", "import sys; sys.exit(0)"], stderr=inout, stdin=inout) p.wait() def test_wait_when_sigchild_ignored(self): # NOTE: sigchild_ignore.py may not be an effective test on all OSes. sigchild_ignore = support.findfile("sigchild_ignore.py", subdir="subprocessdata") p = subprocess.Popen([sys.executable, sigchild_ignore], stdout=subprocess.PIPE, stderr=subprocess.PIPE) stdout, stderr = p.communicate() self.assertEqual(0, p.returncode, "sigchild_ignore.py exited" " non-zero with this error:\n%s" % stderr.decode('utf-8')) def test_select_unbuffered(self): # Issue #11459: bufsize=0 should really set the pipes as # unbuffered (and therefore let select() work properly). select = support.import_module("select") p = subprocess.Popen([sys.executable, "-c", 'import sys;' 'sys.stdout.write("apple")'], stdout=subprocess.PIPE, bufsize=0) f = p.stdout self.addCleanup(f.close) try: self.assertEqual(f.read(4), b"appl") self.assertIn(f, select.select([f], [], [], 0.0)[0]) finally: p.wait() def test_zombie_fast_process_del(self): # Issue #12650: on Unix, if Popen.__del__() was called before the # process exited, it wouldn't be added to subprocess._active, and would # remain a zombie. # spawn a Popen, and delete its reference before it exits p = subprocess.Popen([sys.executable, "-c", 'import sys, time;' 'time.sleep(0.2)'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) self.addCleanup(p.stdout.close) self.addCleanup(p.stderr.close) ident = id(p) pid = p.pid del p # check that p is in the active processes list self.assertIn(ident, [id(o) for o in subprocess._active]) def test_leak_fast_process_del_killed(self): # Issue #12650: on Unix, if Popen.__del__() was called before the # process exited, and the process got killed by a signal, it would never # be removed from subprocess._active, which triggered a FD and memory # leak. # spawn a Popen, delete its reference and kill it p = subprocess.Popen([sys.executable, "-c", 'import time;' 'time.sleep(3)'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) self.addCleanup(p.stdout.close) self.addCleanup(p.stderr.close) ident = id(p) pid = p.pid del p os.kill(pid, signal.SIGKILL) # check that p is in the active processes list self.assertIn(ident, [id(o) for o in subprocess._active]) # let some time for the process to exit, and create a new Popen: this # should trigger the wait() of p time.sleep(0.2) with self.assertRaises(EnvironmentError) as c: with subprocess.Popen(['nonexisting_i_hope'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) as proc: pass # p should have been wait()ed on, and removed from the _active list self.assertRaises(OSError, os.waitpid, pid, 0) self.assertNotIn(ident, [id(o) for o in subprocess._active]) @unittest.skipUnless(mswindows, "Windows specific tests") class Win32ProcessTestCase(BaseTestCase): def test_startupinfo(self): # startupinfo argument # We uses hardcoded constants, because we do not want to # depend on win32all. STARTF_USESHOWWINDOW = 1 SW_MAXIMIZE = 3 startupinfo = subprocess.STARTUPINFO() startupinfo.dwFlags = STARTF_USESHOWWINDOW startupinfo.wShowWindow = SW_MAXIMIZE # Since Python is a console process, it won't be affected # by wShowWindow, but the argument should be silently # ignored subprocess.call([sys.executable, "-c", "import sys; sys.exit(0)"], startupinfo=startupinfo) def test_creationflags(self): # creationflags argument CREATE_NEW_CONSOLE = 16 sys.stderr.write(" a DOS box should flash briefly ...\n") subprocess.call(sys.executable + ' -c "import time; time.sleep(0.25)"', creationflags=CREATE_NEW_CONSOLE) def test_invalid_args(self): # invalid arguments should raise ValueError self.assertRaises(ValueError, subprocess.call, [sys.executable, "-c", "import sys; sys.exit(47)"], preexec_fn=lambda: 1) self.assertRaises(ValueError, subprocess.call, [sys.executable, "-c", "import sys; sys.exit(47)"], stdout=subprocess.PIPE, close_fds=True) def test_close_fds(self): # close file descriptors rc = subprocess.call([sys.executable, "-c", "import sys; sys.exit(47)"], close_fds=True) self.assertEqual(rc, 47) def test_shell_sequence(self): # Run command through the shell (sequence) newenv = os.environ.copy() newenv["FRUIT"] = "physalis" p = subprocess.Popen(["set"], shell=1, stdout=subprocess.PIPE, env=newenv) self.addCleanup(p.stdout.close) self.assertIn(b"physalis", p.stdout.read()) def test_shell_string(self): # Run command through the shell (string) newenv = os.environ.copy() newenv["FRUIT"] = "physalis" p = subprocess.Popen("set", shell=1, stdout=subprocess.PIPE, env=newenv) self.addCleanup(p.stdout.close) self.assertIn(b"physalis", p.stdout.read()) def test_call_string(self): # call() function with string argument on Windows rc = subprocess.call(sys.executable + ' -c "import sys; sys.exit(47)"') self.assertEqual(rc, 47) def _kill_process(self, method, *args): # Some win32 buildbot raises EOFError if stdin is inherited p = subprocess.Popen([sys.executable, "-c", """if 1: import sys, time sys.stdout.write('x\\n') sys.stdout.flush() time.sleep(30) """], stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE) self.addCleanup(p.stdout.close) self.addCleanup(p.stderr.close) self.addCleanup(p.stdin.close) # Wait for the interpreter to be completely initialized before # sending any signal. p.stdout.read(1) getattr(p, method)(*args) _, stderr = p.communicate() self.assertStderrEqual(stderr, b'') returncode = p.wait() self.assertNotEqual(returncode, 0) def _kill_dead_process(self, method, *args): p = subprocess.Popen([sys.executable, "-c", """if 1: import sys, time sys.stdout.write('x\\n') sys.stdout.flush() sys.exit(42) """], stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE) self.addCleanup(p.stdout.close) self.addCleanup(p.stderr.close) self.addCleanup(p.stdin.close) # Wait for the interpreter to be completely initialized before # sending any signal. p.stdout.read(1) # The process should end after this time.sleep(1) # This shouldn't raise even though the child is now dead getattr(p, method)(*args) _, stderr = p.communicate() self.assertStderrEqual(stderr, b'') rc = p.wait() self.assertEqual(rc, 42) def test_send_signal(self): self._kill_process('send_signal', signal.SIGTERM) def test_kill(self): self._kill_process('kill') def test_terminate(self): self._kill_process('terminate') def test_send_signal_dead(self): self._kill_dead_process('send_signal', signal.SIGTERM) def test_kill_dead(self): self._kill_dead_process('kill') def test_terminate_dead(self): self._kill_dead_process('terminate') # The module says: # "NB This only works (and is only relevant) for UNIX." # # Actually, getoutput should work on any platform with an os.popen, but # I'll take the comment as given, and skip this suite. @unittest.skipUnless(os.name == 'posix', "only relevant for UNIX") class CommandTests(unittest.TestCase): def test_getoutput(self): self.assertEqual(subprocess.getoutput('echo xyzzy'), 'xyzzy') self.assertEqual(subprocess.getstatusoutput('echo xyzzy'), (0, 'xyzzy')) # we use mkdtemp in the next line to create an empty directory # under our exclusive control; from that, we can invent a pathname # that we _know_ won't exist. This is guaranteed to fail. dir = None try: dir = tempfile.mkdtemp() name = os.path.join(dir, "foo") status, output = subprocess.getstatusoutput('cat ' + name) self.assertNotEqual(status, 0) finally: if dir is not None: os.rmdir(dir) @unittest.skipUnless(getattr(subprocess, '_has_poll', False), "poll system call not supported") class ProcessTestCaseNoPoll(ProcessTestCase): def setUp(self): subprocess._has_poll = False ProcessTestCase.setUp(self) def tearDown(self): subprocess._has_poll = True ProcessTestCase.tearDown(self) class HelperFunctionTests(unittest.TestCase): @unittest.skipIf(mswindows, "errno and EINTR make no sense on windows") def test_eintr_retry_call(self): record_calls = [] def fake_os_func(*args): record_calls.append(args) if len(record_calls) == 2: raise OSError(errno.EINTR, "fake interrupted system call") return tuple(reversed(args)) self.assertEqual((999, 256), subprocess._eintr_retry_call(fake_os_func, 256, 999)) self.assertEqual([(256, 999)], record_calls) # This time there will be an EINTR so it will loop once. self.assertEqual((666,), subprocess._eintr_retry_call(fake_os_func, 666)) self.assertEqual([(256, 999), (666,), (666,)], record_calls) @unittest.skipUnless(mswindows, "Windows-specific tests") class CommandsWithSpaces (BaseTestCase): def setUp(self): super().setUp() f, fname = mkstemp(".py", "te st") self.fname = fname.lower () os.write(f, b"import sys;" b"sys.stdout.write('%d %s' % (len(sys.argv), [a.lower () for a in sys.argv]))" ) os.close(f) def tearDown(self): os.remove(self.fname) super().tearDown() def with_spaces(self, *args, **kwargs): kwargs['stdout'] = subprocess.PIPE p = subprocess.Popen(*args, **kwargs) self.addCleanup(p.stdout.close) self.assertEqual( p.stdout.read ().decode("mbcs"), "2 [%r, 'ab cd']" % self.fname ) def test_shell_string_with_spaces(self): # call() function with string argument with spaces on Windows self.with_spaces('"%s" "%s" "%s"' % (sys.executable, self.fname, "ab cd"), shell=1) def test_shell_sequence_with_spaces(self): # call() function with sequence argument with spaces on Windows self.with_spaces([sys.executable, self.fname, "ab cd"], shell=1) def test_noshell_string_with_spaces(self): # call() function with string argument with spaces on Windows self.with_spaces('"%s" "%s" "%s"' % (sys.executable, self.fname, "ab cd")) def test_noshell_sequence_with_spaces(self): # call() function with sequence argument with spaces on Windows self.with_spaces([sys.executable, self.fname, "ab cd"]) class ContextManagerTests(BaseTestCase): def test_pipe(self): with subprocess.Popen([sys.executable, "-c", "import sys;" "sys.stdout.write('stdout');" "sys.stderr.write('stderr');"], stdout=subprocess.PIPE, stderr=subprocess.PIPE) as proc: self.assertEqual(proc.stdout.read(), b"stdout") self.assertStderrEqual(proc.stderr.read(), b"stderr") self.assertTrue(proc.stdout.closed) self.assertTrue(proc.stderr.closed) def test_returncode(self): with subprocess.Popen([sys.executable, "-c", "import sys; sys.exit(100)"]) as proc: pass # __exit__ calls wait(), so the returncode should be set self.assertEqual(proc.returncode, 100) def test_communicate_stdin(self): with subprocess.Popen([sys.executable, "-c", "import sys;" "sys.exit(sys.stdin.read() == 'context')"], stdin=subprocess.PIPE) as proc: proc.communicate(b"context") self.assertEqual(proc.returncode, 1) def test_invalid_args(self): with self.assertRaises(EnvironmentError) as c: with subprocess.Popen(['nonexisting_i_hope'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) as proc: pass if c.exception.errno != errno.ENOENT: # ignore "no such file" raise c.exception def test_main(): unit_tests = (ProcessTestCase, POSIXProcessTestCase, Win32ProcessTestCase, CommandTests, ProcessTestCaseNoPoll, HelperFunctionTests, CommandsWithSpaces, ContextManagerTests, ) support.run_unittest(*unit_tests) support.reap_children() if __name__ == "__main__": unittest.main()