The Ghostscript Library

Table of contents

For other information, see the Ghostscript overview.

The Ghostscript library

This document describes the Ghostscript library, a set of procedures to implement the graphics and filtering capabilities that are primitive operations in the PostScript language and in Adobe Portable Document Format (PDF).

Ghostscript is actually two programs: a language interpreter, and a graphics library. The library provides, in the form of C procedures, all the graphics functions of the language, that is, approximately those facilities listed in section 8.1 of the PostScript Language Reference Manual, starting with the graphics state operators. In addition, the library provides some lower-level graphics facilities that offer higher performance in exchange for less generality.

PostScript operator API

The highest level of the library, which is the one that most clients will use, directly implements the PostScript graphics operators with procedures named gs_XXX, for instance gs_moveto and gs_fill. Nearly all of these procedures take graphics state objects as their first arguments, such as

int gs_moveto(gs_state *, double, double);

Nearly every procedure returns an integer code which is >= 0 for a successful return or <0 for a failure. The failure codes correspond directly to PostScript errors, and are defined in gserrors.h.

The library implements all the operators in the following sections of the PostScript Language Reference Manual, with the indicated omissions and with the APIs defined in the indicated .h files. A header of the form A.h(B.h) indicates that A.h is included in B.h, so A.h need not be included explicitly if B.h is included. Operators marked with * in the "omissions" column are not implemented directly; the library provides lower-level procedures that can be used to implement the operator.

There are slight differences in the operators that return multiple values, since C's provisions for this are awkward. Also, the control structure for the operators involving callback procedures (pathforall, image, colorimage, imagemask) is partly inverted: the client calls a procedure to set up an enumerator object, and then calls another procedure for each iteration. The ...show operators, charpath, and stringwidth also use an inverted control structure.

Section
(operators) 		   Headers    Omissions
Graphics state -- device-independent   gscolor.h(gsstate.h)
gscolor1.h
gscolor2.h
gscspace.h
gshsb.h
gsline.h(gsstate.h)
gsstate.h 		   
 
Graphics state -- device-dependent   gscolor.h(gsstate.h)
gscolor1.h
gscolor2.h
gsht.h(gsht1.h,gsstate.h)
gsht1.h
gsline.h(gsstate.h) 		   
 
Coordinate system and matrix   gscoord.h
gsmatrix.h 		  *matrix, *identmatrix, *concatmatrix, *invertmatrix
 
Path construction   gspath.h
gspath2.h 		  *arct, *pathforall, ustrokepath, uappend, upath, ucache
 
Painting   gsimage.h
gspaint.h
gspath2.h 		  *image, *colorimage, *imagemask, ufill, ueofill, ustroke
 
Form and pattern   gscolor2.h   execform
 
Device setup and output   gsdevice.h   *showpage, *set/currentpagedevice
 
Character and font   gschar.h
gsfont.h 		  *(all the show operators), definefont, undefinefont, findfont, *scalefont, *makefont, selectfont, [Global]FontDirectory, Standard/ISOLatin1Encoding, findencoding

The following procedures from the list above operate differently from their PostScript operator counterparts, as explained here:

gs_makepattern(gscolor2.h)
Takes an explicit current color, rather than using the current color in the graphics state. Takes an explicit allocator for allocating the pattern implementation. See below for more details on gs_makepattern.
gs_setpattern(gscolor2.h)
gs_setcolor(gscolor2.h)
gs_currentcolor(gscolor2.h)
Use gs_client_color rather than a set of color parameter values. See below for more details on gs_setpattern.
gs_currentdash_length/pattern/offset(gsline.h)
Splits up currentdash into three separate procedures.
gs_screen_init/currentpoint/next/install(gsht.h)
Provide an "enumeration style" interface to setscreen. (gs_setscreen is also implemented.)
gs_rotate/scale/translate(gscoord.h)
gs_[i][d]transform(gscoord.h)
These always operate on the graphics state CTM. The corresponding operations on free-standing matrices are in gsmatrix.h and have different names.
gs_path_enum_alloc/init/next/cleanup(gspath.h)
Provide an "enumeration style" implementation of pathforall.
gs_image_enum_alloc(gsimage.h)
gs_image_init/next/cleanup(gsimage.h)
Provide an "enumeration style" interface to the equivalent of image, imagemask, and colorimage. In the gs_image_t, ColorSpace provides an explicit color space, rather than using the current color space in the graphics state; ImageMask distinguishes imagemask from [color]image.
gs_get/putdeviceparams(gsdevice.h)
Take a gs_param_list for specifying or receiving the parameter values. See gsparam.h for more details.
gs_show_enum_alloc/release(gschar.h)
gs_xxxshow_[n_]init(gschar.h)
gs_show_next(gschar.h)
Provide an "enumeration style" interface to writing text. Note that control returns to the caller if the character must be rasterized.

This level of the library also implements the following operators from other sections of the Manual:

Section
(operators) 		   Headers    Operators
Interpreter parameter   gsfont.h   cachestatus, setcachelimit, *set/currentcacheparams
Display PostScript   gsstate.h   set/currenthalftonephase

In order to obtain the full PostScript Level 2 functionality listed above, FEATURE_DEVS must be set in the makefile to include at least the following:

FEATURE_DEVS=patcore.dev cmykcore.dev psl2core.dev dps2core.dev ciecore.dev path1core.dev hsbcore.dev

The *lib.mak makefiles mentioned below do not always include all of these features.

Files named gs*.c implement the higher level of the graphics library. As might be expected, all procedures, variables, and structures available at this level begin with "gs_". Structures that appear in these interfaces, but whose definitions may be hidden from clients, also have names beginning with "gs_", that is, the prefix, not the implementation, reflects at what level the abstraction is made available.

Patterns

Patterns are the most complicated PostScript language objects that the library API deals with. As in PostScript, defining a pattern color and using the color are two separate operations.

gs_makepattern defines a pattern color. Its arguments are as follows:

gs_client_color *     The resulting Pattern color is stored here. This is different from PostScript, which has no color objects per se, and hence returns a modified copy of the dictionary.
const gs_client_pattern *   The analogue of the original Pattern dictionary, described in detail just below.
const gs_matrix *   Corresponds to the matrix argument of the makepattern operator.
gs_state *   The current graphics state.
gs_memory_t *   The allocator to use for allocating the saved data for the Pattern color. If this is NULL, gs_makepattern uses the same allocator that allocated the graphics state. Library clients should probably always use NULL.

The gs_client_pattern structure defined in gscolor2.h corresponds to the Pattern dictionary that is the argument to the PostScript language makepattern operator. This structure has one extra member, void *client_data, which is a place for clients to store a pointer to additional data for the PaintProc; this provides the same functionality as putting additional keys in the Pattern dictionary at the PostScript language level. The PaintProc is an ordinary C procedure that takes as parameters a gs_client_color *, which is the Pattern color that is being used for painting, and a gs_state *, which is the same graphics state that would be presented to the PaintProc in PostScript. Currently the gs_client_color * is always the current color in the graphics state, but the PaintProc should not rely on this. The PaintProc can retrieve the gs_client_pattern * from the gs_client_color * with the gs_getpattern procedure, also defined in gscolor2.h, and from there, it can retrieve the client_data pointer.

The normal way to set a Pattern color is to call gs_setpattern with the graphics state and with the gs_client_color returned by gs_makepattern. After that, one can use gs_setcolor to set further Pattern colors (colored, or uncolored with the same underlying color space); the rules are the same as those in PostScript. Note that for gs_setpattern, the paint.values in the gs_client_color must be filled in for uncolored patterns; this corresponds to the additional arguments for the PostScript setpattern operator in the uncolored case.

There is a special procedure gs_makebitmappattern for creating bitmap-based patterns. Its API is documented in gscolor2.h; its implementation, in gspcolor.c, may be useful as an example of a pattern using a particularly simple PaintProc.

Lower-level API

Files named gx*.c implement the lower level of the graphics library. The interfaces at the gx level are less stable, and expose more of the implementation detail, than those at the gs level: in particular, the gx interfaces generally use device coordinates in an internal fixed-point representation, as opposed to the gs interfaces that use floating point user coordinates. Named entities at this level begin with gx_.

Files named gz*.c and gz*.h are internal to the Ghostscript implementation, and are not designed to be called by clients.

Visual Trace instructions

Visual Trace instructions may be inserted in code to provide debug output in a graphical form. Graphics Library doesn't provide a rasterisation of the output, because it is platform dependent. Instead this, client application shpuld set vd_trace0 external variable to Graphics Library, passing a set of callbacks which provide the rasterization.

Visual Trace instructions are defined in vdtrace.h. Debug output must be opened with vd_get_dc instruction, which obtains a drawing context for the debug output, and must be closed with vd_release_dc instruction. After opening the output, scale, origin and shift to be set for mapping the debugee coordinate space to window coordinate space. Than painting instructions to be used. Painting may be either immediate or indirect.

Indirect painting uses vd_beg_path before line output and vd_end_path after line output, to store a path into a temporary storage. After this vd_stroke may be used for stroking the path, or vd_fill may be used for filling the region inside the path.

Immediate painting happens when path construction instructions are involved without vd_beg_path and vd_end_path. In this case lines and curves are being drawed immediately, when a path construction instruction is executed.

The following table explains the semantics of Visual Trace instructions.

Visual Trace instructions
Instruction    Function    Parameters
vd_get_dc    Obtain drawing context    -T option flag value, for which the subsequent output is enabled.
vd_release_dc    Release drawing context   
vd_enabled    Is trace currently enabled ?   
vd_get_size_unscaled_x    Get the horizontal size of the output window in pixels.   
vd_get_size_unscaled_y    Get the vertical size of the output window in pixels.   
vd_get_size_caled_x    Get the horizontal size of the output window in debuggee coordinate units.   
vd_get_size_caled_y    Get the vertical size of the output window in debuggee coordinate units.   
vd_get_scale_x    Get the horizontal scale.   
vd_get_scale_y    Get the vertical scale.   
vd_get_origin_x    Get the horizontal position of the draft origin in debuggee coordinate space.   
vd_get_origin_y    Get the vertical position of the draft origin in debuggee coordinate space.   
vd_set_scale(s)    Set isotripic scale.    Debugee space to window space mapping scale, same for both dimentions.
vd_set_scaleXY(sx,sy)    Set anisotripic scale.    Debugee space to window space mapping scale, one for each dimention.
vd_set_origin(x,y)    Set the draft origin.    Origin of the draft in debugee space.
vd_set_shift(x,y)    Set the draft position.    Position of the draft origin in window space (in pixels).
vd_set_central_shift    Set the draft position to window center.   
vd_erase(c)    Fill entire window.    Color to fill.
vd_beg_path    Begin path construction.   
vd_end_path    End path construction.   
vd_moveto(x,y)    Path construction : Set the draft current point.    Debugee coordinates.
vd_lineto(x,y)    Path construction : Line from current point to specified point.    Debugee coordinates.
vd_lineto_mupti(p,n)    Path construction : Poliline from current point to specified points.    Array of points and its size, debugee coordinates.
vd_curveto(x0,y0,x1,y1,x2,y2)    Path construction : Curve (3rd-order Bezier) from current point to specified point, with specified poles.    2 poles and the curve ending point, debuggee coordinates.
vd_closepath    Path construction : Close the path (is necessary for filling an area).   
vd_bar(x0,y0,x1,y1,w,c)    Bar from point to point.    2 points (debugee coordinates), width (in pixels) and color.
vd_square(x0,y0,w,c)    Square with specified center and size.    The center (debugee coordinates), size (in pixels) and color.
vd_rect(x0,y0,x1,y1,w,c)    Canonic rectangle with specified coordinites.    Coordinates of boundaries (debugee coordinates), line width (in pixels) and color.
vd_quad(x0,y0,x1,y1,x2,y2,x3,y3,w,c)    Quadrangle with specified coordinites.    Coordinates of vertices (debugee coordinates), line width (in pixels) and color.
vd_curve(x0,y0,x1,y1,x2,y2,x3,y3,c,w)    Curve with width.    4 curve poles (debugee coordinates), color, and width (in pixels).
vd_circle(x,y,r,c)    Circle.    Center (debugee coordinates), radius (in pixels) and color.
vd_round(x,y,r,c)    Filled circle.    Center (debugee coordinates), radius (in pixels) and color.
vd_stroke    Stroke a path constructed with vd_beg_path, vd_moveto, vd_lineto, vd_curveto, vd_closepath, vd_end_path.   
vd_fill    Fill a path constructed with vd_beg_path, vd_moveto, vd_lineto, vd_curveto, vd_closepath, vd_end_path.   
vd_setcolor(c)    Set a color.    Color (an integer consisting of red, green, blue bytes).
vd_setlinewidth(w)    Set line width.    Width (in pixels).
vd_text(x,y,s,c)    Paint a text.    Origin point (debugee coordinates), a string, and a color.
vd_wait    Delay execution until a resuming command is entered through user interface.   

Graphics Library doesn't provide a rasterization of the debug output. Instead it calls callbacks, which are specified by a client, and which may have a platform dependent implementation. The implementation must not use Graphics Library to exclude recursive calls to it from Visual Trace instructions. The callbacks and auxiliary data are collected in the structure vd_trace_interface, explained in the table below.

vd_trace_interface structure
Field    Purpose    Parameters
host    A pointer to the rasterizer control block - to be provided by client application. The type of the fild is client dependent.   
scale_x, scale_y    Scale of debugee coordinate to window coordinate mapping - internal work data, don't change.   
orig_x, orig_y    Draft origin in debugee coordinates - internal work data, don't change.   
shift_x, shift_y    Draft shift in window coordinates - internal work data, don't change.   
get_size_x(I)    Get window width in pixels.   
get_size_y(I)    Get window height in pixels.   
get_dc(I,I1)    Obtain drawing context.    Pointer to interface block, and pointer to copy of the pointer. Implementation must set *I1 if it succeeds to get a drawing context.
release_dc(I,I1)    Release drawing context.    Pointer to interface block, and pointer to copy of the pointer. Implementation must reset *I1 if it succeeds to release the drawing context.
erase(I,c)    Erase entire window.    Background color.
beg_path(I)    Begin path construction.   
end_path(I)    End path construction.   
moveto(I,x,y)    Set current point.    A point in window coordinates.
lineto(I,x,y)    Line from current point to specified point.    A point in window coordinates.
curveto(I,x0,y0,x1,y1,x2,y2)    Curve from current point with specified poles to specified point.    3 points in window coordinates.
closepath(I)    Close the path.   
circle(I,x,y,r)    Circle.    Center and radius, window coordinates.
round(I,x,y,r)    Filled circle.    Center and radius, window coordinates.
fill(I)    Fill the path.   
stroke(I)    Stroke the path.   
setcolor(I,c)    Set color.    An integer, consisting of red, green, blue bytes.
setlinewidth(I,w)    Set line width.    Line width in pixels.
text(I,x,y,s)    Draw a text.    Coodrinates in pixels, and a string.
wait(I)    Delay execution untill resume command is inputted from user.   

A full example

The file gslib.c in the Ghostscript fileset is a complete example program that initializes the library and produces output using it; files named *lib.mak (such as ugcclib.mak and bclib.mak) are makefiles using gslib.c as the main program. The following annotated excerpts from this file are intended to provide a roadmap for applications that call the library. 

/* Capture stdin/out/err before gs.h redefines them. */
#include <stdio.h>
static FILE *real_stdin, *real_stdout, *real_stderr;
static void
get_real(void)
{       real_stdin = stdin, real_stdout = stdout, real_stderr = stderr;
}

Any application using Ghostscript should include the fragment above at the very beginning of the main program. 

#include "gx.h"

The gx.h header includes a wealth of declarations related to the Ghostscript memory manager, portability machinery, debugging framework, and other substrate facilities. Any application file that calls any Ghostscript API functions should probably include gx.h. 

/* Configuration information imported from gconfig.c. */
extern gx_device *gx_device_list[];

/* Other imported procedures */
        /* from gsinit.c */
extern void gs_lib_init(P1(FILE *));
extern void gs_lib_finit(P2(int, int));
        /* from gsalloc.c */
extern gs_ref_memory_t *ialloc_alloc_state(P2(gs_memory_t *, uint));

The externs above are needed for initializing the library. 

        gs_ref_memory_t *imem;
#define mem ((gs_memory_t *)imem)
        gs_state *pgs;
        gx_device *dev = gx_device_list[0];

        gp_init();
        get_real();
        gs_stdin = real_stdin;
        gs_stdout = real_stdout;
        gs_stderr = real_stderr;
        gs_lib_init(stdout);
        ....
        imem = ialloc_alloc_state(&gs_memory_default, 20000);
        imem->space = 0;
        ....
        pgs = gs_state_alloc(mem);

The code above initializes the library and its memory manager. pgs now points to the graphics state that will be passed to the drawing routines in the library. 

        gs_setdevice_no_erase(pgs, dev);    /* can't erase yet */
        {   gs_point dpi;
            gs_screen_halftone ht;
            gs_dtransform(pgs, 72.0, 72.0, &dpi);
            ht.frequency = min(fabs(dpi.x), fabs(dpi.y)) / 16.001;
            ht.angle = 0;
            ht.spot_function = odsf;
            gs_setscreen(pgs, &ht);
        }

The code above initializes the default device and sets a default halftone screen. (For brevity, we have omitted the definition of odsf, the spot function.) 

        /* gsave and grestore (among other places) assume that */
        /* there are at least 2 gstates on the graphics stack. */
        /* Ensure that now. */
        gs_gsave(pgs);

The call above completes initializing the graphics state. When the program is finished, it should execute: 

        gs_lib_finit(0, 0);

Copyright © 2000-2006 Artifex Software, Inc. All rights reserved.

This software is provided AS-IS with no warranty, either express or implied. This software is distributed under license and may not be copied, modified or distributed except as expressly authorized under the terms of that license. Refer to licensing information at http://www.artifex.com/ or contact Artifex Software, Inc., 7 Mt. Lassen Drive - Suite A-134, San Rafael, CA 94903, U.S.A., +1(415)492-9861, for further information.

Ghostscript version 9.22, 4 October 2017